Vandyshev A.B. Kulikov V.A. Analysis of the Design Calculation of a Membrane-Catalytic Converterf or Producing High-Purity Hydrogenf rom Biodiesel Fuel // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 3-4. P. 209-215. DOI: 10.1007/s10556-019-00607-8.
Vandyshev A.B. Kulikov V.A. Analysis of the Efficiency of a Pd/Ag Membrane with a Thickness of 2.25 Microns on a Porous Ceramic Substrate in a laboratory Membrane Reactor // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 1-2. P. 31-37. DOI: 10.1007/s10556-019-00592-y.
Vandyshev A.B. Kulikov V.A. Analysis of the results of testing an individual disk-type membrane-catalytic module for obtaining high-purity hydrogen from methane // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 9-10. P. 725-732. DOI: 10.1007/s10556-020-00686-y.
Vandyshev A.B. Kulikov V.A. Evaluation of design parameters for a 32-module disk-type membrane-catalytic reactor for producing high-purity hydrogen from diesel fuel // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 9-10. P. 815-820. DOI: 10.1007/s10556-020-00698-8.
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of frictional treatment on structure, micromechanical and tribological properties of 03Cr16Ni14Mo3Ti austenitic steel // Metal Science and Heat Treatment. 2019. No. 11-12.
Emelyanov I.G. Mironov V.I. Hodak A.S. The Boundary Value Problem of Determining Hydrogen Concentration and the Stress State in a Titanium Shell // AIP Conference Proceedings. 2019. Vol. 2176. 030005. –https://doi.org/10.1063/1.5135129.
Soboleva N.N. Makarov A.V. Skorynina P.A. Nikolaeva E.P. Malyigina I.Yu. The Effect of Load during Frictional Treatment with a DBN Indenter on the Surface Finish of the NiCrBSi–Cr3C2 Laser Clad Coating // AIP Conference Proceedings. 2019. Vol. 2167. 020345. – https://doi.org/10.1063/1.5132212.
Emelyanov I.G. Thermodiffusion Problem of Determination of the Stress State of a Steel Shell Structure // E3S Web of Conferences. Advances in Intelligent Systems and Computing. Springer. 2019. Vol. 135. 03002. – https://doi.org/10.1051/e3sconf/201913503002.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Makarov A.V. Investigation of Structure and Properties of High-strength Bimetallic Materials Produced иy Explosion Welding and Have Been Exploited in Arctic Climate // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 231-238. DOI 10.18502/keg.v1i1.4414.
Emelyanov I.G. Mironov V.I. Lukashuk O.A. Phenomenon of embrittlement in titanium shells from hydrogen exposure // IOP Conf. Series: Materials Science and Engineering. 2019. Vol. 537. 022067. DOI:10.1088/1757-899X/537/2/022067.
Alwan H.L. Korobov Yu.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Deviatiarov M.S. Elkind D.M. Behavior of a welded-deposited stainless steel tested at different cavitation test conditions // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012002. – DOI: 10.1088/1757-899X/681/1/012002.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Improving the properties of a rapidly crystallized NiCrBSi laser clad coating by high-temperature processing // Journal of Crystal Growth. 2019. Vol. 525. Art. 125200. – DOI: https://doi.org/10.1016/j.jcrysgro.2019.12520.
Pugacheva (Vandysheva) N.B. Makarov A.V. Senaeva (Pugacheva) E.I. Volkova E.G. Crystallization of Dissimilar Ti/Cu/ Steel Laser Welds // Journal of Crystal Growth. 2019. Vol. 526. Art. 125212. https://doi.org/10.1016/j.jcrysgro.2019.125212.
Savrai R.A. Malyigina I.Yu. Kolobyilin Yu.M. An Approach to Eddy-Current Evaluation of the Structural State in a Cast Aluminum–Silicon Alloy Subjected to Surface Laser Heat Treatment // Journal of Nondestructive Evaluation. 2019. Vol. 38. Is. 3. Art. 81. P. 1-7. https://doi.org/10.1007/s10921-019-0620-7.
Menshakov A.I. Skorynina P.A. A new method of low-temperature cementation of stainless steel by decomposition of C2H2 in low-energy electron beam generated plasma // Journal of Physics: Conference Series. 2019. Vol. 1393. 012109. – DOI:10.1088/1742-6596/1393/1/012109.
Emelyanov I.G. Polyakov A.A. Hodak A.S. Stressed state of a steel construction working in hydrogen containing environment // Journal of Physics: Conference Series. 2019. Vol. 1391. 012027. – DOI: 10.1088/1742-6596/1391/1/012027.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Kolobyilin Yu.M. Effect of laser alloying with the powder mixtures of Cu–Zn–Ti and Si–Cu on the structure and properties of cast aluminum alloy // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science. 2019. Vol. 21. No. 4. P. 70–84. DOI: 10.17212/1994-6309-2019-21.4-70-84.
Skorynina P.A. Makarov A.V. Men’shakov A.I. Osinceva A.L. Effect of low-temperature carburization in electron beam plasma on the hardening and surface roughness of the metastable austenitic steel // Obrabotka Metallov-Metal Working and Material Science. 2019. Vol. 21. No. 2. P. 97–109. DOI: 10.17212/1994-6309-2019-21.2-97-109.
Korobov Yury Khudorozhkova Yu.V. Holger Hilli Vopneruk Alexander Kotelnikov Aleksandr Burov S.V. Balu Prabu Makarov A.V. Chernov Alexey The Effect of Thickness on the Properties of Laser-Deposited NiBSi-WC Coating on a Cu-Cr-Zr Substrate // Photonics. 2019. Vol. 6. 127. – DOI: 10.3390/photonics6040127.
Korobov Yury Michael Filippov Makarov A.V. Malyigina I.Yu. Soboleva N.N. Davide Fantozzi Milanti Andrea Heli Koivuluoto and Petri Vuoristo. Arc-Sprayed Fe-Based Coatings from CoredWires for Wear and Corrosion Protection in Power Engineering. 2018. Vol. 8. No. 71. DOI: 10.3390/coatings8020071.
Savrai R.A. Makarov A.V. Osinceva A.L. Malyigina I.Yu. Estimating the Contact Endurance of the AISI 321 Stainless Steel Under Contact Gigacycle Fatigue Tests // Journal of Materials Engineering and Performance. 2018. Vol. 27. Is. 2. P. 601-611.
Smolyaninov A. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Lapshin V. Survivability of the Locomotive Cabin at Interval Estimation of Obstacle Parameters // MATEC Web of Conferences. 2018. V. 216. 02021. doi.org/10.1051/matecconf/201821602021.
Savrai R.A. Makarov A.V. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part II: mechanical properties // Materials Science & Engineering: A. 2018. 734. P. 513-518. https://doi.org/10.1016/j.msea.2018.07.100.
Savrai R.A. Makarov A.V. Malyigina I.Yu. Volkova E.G. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part I: microstructure and surface properties // Materials Science & Engineering: A. 2018. 734. P. 506-512. https://doi.org/10.1016/j.msea.2018.07.099.
Vandyshev A.B. Kulikov V.A. Analysis of the Calculated parameters of a Model Membrane-Catalytic Converter for the Production of High-Purity Hydrogen from Methane. // Chemical and Petroleum Engineering. 2018. Vol. 54. No. 1-2. P. 31-37. DOI: 10.1007/s10556-018-0434-y.
Vandyshev A.B. Kulikov V.A. Modeling a Membrane Reformer with a Carbon-Monoxide Conversion Catalyst for Extracting High-Purity Hydrogen from Methane Steam-Conversion Products // Chemical and Petroleum Engineering. 2018. Vol. 54. Nos. 5-6. P. 313-321. DOI: 10.1007/s10556-018-0481-4.
Shabashov V.A. Gavrilov N.V. Kozlov K.A. Makarov A.V. Titova S.G. Voronin V.I. Structure of the surface layers of metastable austenitic stainless steel nitrided in electron beam plasma // The Physics of Metals and Metallography. 2018. V. 119. – No. 8. – P. 755-763. – DOI: 10.1134/S0031918X18080124.
Shabashov V.A. Makarov A.V. Kozlov K.A. Sagaradze V.V. Zamatovskii A.E. Volkova E.G. Luchko S.N. Deformation-Induced Dissolution and Precipitation of Nitrides in Austenite and Ferrite of a High-Nitrogen Stainless Steel // The Physics of Metals and Metallography. 2018. V. 119. – No. 2. – P. 196-206. – DOI: 10.1134/S0031918X18020096.
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of Heating on the Structure, Phase Composition and Micromechanical Properties of the Metastable Austenitic Steel Strengthened by Nanostructuring Frictional Treatment // The Physics of Metals and Metallography. 2018. V. 119. – Is. 12. – P. 1196-1203.
Savrai R.A. Resistance of laser-clad chromium–nickel coatings to failure under contact fatigue loading // The Physics of Metals and Metallography. 2018. V. 119. – Is. 10. – P. 1013-1021. – DOI: 10.1134/S001532301810011X.
Skorynina P.A. Makarov A.V. Volkova E.G. Osinceva A.L. Increasing the Micromechanical and Tribological Characteristics of an Austenitic Steel by Surface Deformation Processing. 2018. Vol. 2053. 030064. https://doi.org/10.1063/1.5084425.
Lezhnin N.V. Makarov A.V. Gavrilov N.V. Osinceva A.L. Savrai R.A. Improving the Scratch Test Properties of Plasma-Nitrided Stainless Austenitic Steel by Preliminary Nanostructuring Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 040050. – https://doi.org/10.1063/1.5084488.
Emelyanov I.G. Mironov V.I. A Method for Estimating the Hydrogenation of a Shell with Variable Geometrical and Physical-Mechanical Parameters // AIP Conference Proceedings. 2018. Vol. 2053. 030012. https://doi.org/10.1063/1.5084373.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Durability of a Locomotive Cab at a Railway Crossing Calculated with the Estimation of the Obstacle Parameters // AIP Conference Proceedings. 2018. Vol. 2053. – 040018. – https://doi.org/10.1063/1.5084456.
Makarov A.V. Savrai R.A. Malyigina I.Yu. Volkova E.G. Burov S.V. Nanostructuring and Surface Hardening of Structural Steels by Ultrasonic Impact-Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 020006. – https://doi.org/10.1063/1.5084352.
Makarov A.V. Soboleva N.N. Gibzun M.S. Malyigina I.Yu. Korobov Yu.S. Increasing the Resistance of a NiCrBSi Coating to Heat Wear by Means of Combined Laser Heat Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 030037. – https://doi.org/10.1063/1.5084398.
Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Malyigina I.Yu. Trushina E.B. Formation of the Structure of Fe-Ni-Ti-C-B Composites Under Self-Propagating High-Temperature Synthesis // AIP Conference Proceedings. 2018. Vol. 2053. 020013. https://doi.org/10.1063/1.5084359.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. Studying the Structure and Micromechanical Properties of a Hardfaced Wear-Resistant Coating // AIP Conference Proceedings. 2018. Vol. 2053. 040079. https://doi.org/10.1063/1.5084517.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.
Savrai R.A. Davydova (Pozdejeva) N.A. Makarov A.V. Malyigina I.Yu. Effect of Frictional Treatment on the Microstructure and Surface Properties of Low-Carbon Steel // AIP Conference Proceedings. 2018. Vol. 2053. – 040087. – https://doi.org/10.1063/1.5084525.
Savrai R.A. Makarov A.V. Analytical and Experimental Assessment of Ultimate Tensile Strength of a Hardened Layer on a Material Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030060. – https://doi.org/10.1063/1.5084421.
Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.
Soboleva N.N. Makarov A.V. Malyigina I.Yu. NiCrBSi coating obtained by laser cladding and subsequent deformation processing // IOP Conf. Series: Journal of Physics: Conference Series. 2018. Vol. 946. 013004.
Lenivtseva O. Tokarev A. Chakin I. Burov S.V. Khudorozhkova Yu.V. Surface Hardening of Commercially Pure Titanium by Non-vacuum Electron Beam Cladding of Powder Mixtures // Obrabotka metallov - Metal Working and Material Science. 2018. Vol. 20. Iss. 2. P. 116-129. DOI: 10.17212/1994-6309-2018-20.2-116-129.
Emelyanov I.G. Mironov V.I. A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 27-35. DOI: 10.15593/perm.mech/2018.3.03.
Emelyanov I.G. Mechanics of Shells and Its Applications [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 6-28. DOI: 10.17804/2410-9908.2018.2.006-028.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
Vandyshev A.B. Kulikov V.A. Estimate of High-Purity Hydrogen Production Efficiency in Membrane-Catalytic-Systems from Reforming Products of Gasoline, Kerosene, and Diesel Oil // Chemical and Petroleum Engineering. 2017. Vol. 53. No. 9-10. P. 592-597. DOI: 10.1007/s10556-018-0386-2.
Pugacheva (Vandysheva) N.B. Malyigina I.Yu. Michurov N.S. Pugacheva E.I. Antenorova N.P. Effect of Heat Treatment on the Structure and Phase Composition of Aliminum Matrix Composites Containing Silicon Carbide [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. – DOI: 10.17804/2410-9908.2017.6.028-036. 2017. Iss. 6. P. 28-36.
Yu.S. Korobov S.V. Nevezhin M.A. Filiрpov Makarov A.V. Malyigina I.Yu. D. Fantozzi A. Milanti H. Koivuluoto P. Vuoristo Properties of Arc-Sprayed Coatings from Fe-based Cored Wires for High-Temperature Applications // AIP Conf. Proc. 2017. Vol. 1915. – 020004. Full text>>
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluating the Effect of Damping Structures in the Design of a Locomotive Cab during a Collision // AIP Conf. Proc. 2017. Vol. 1915. – 040011. Full text>>
Makarov A.V. G.V. Samoylova N.V. Gavrilov A.S. Mamayev Osinceva A.L. T.E. Kurennykh Savrai R.A. Effect of Preliminary Nanostructuring Frictional Treatment on the Efficiency of Nitriding of Metastable Austenitic Steel in Electron Beam Plasma // AIP Conf. Proc. 2017. Vol. 1915. – 030011. Full text>>
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Thermal Stability of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2017. Vol. 1915. – 030012. Full text>>
Savrai R.A. Kuznetsov A.V. Evaluation of Contact Stresses in the Surface of an Elastic-Plastic Plate Penetrated by a Flat-Ended Rigid Cylindrical Punch // AIP Conf. Proc. 2017. Vol. 1915. – 040050. Full text>>
Savrai R.A. Makarov A.V. Gorkunov E.S. Soboleva N.N. L.Kh. Kogan Malyigina I.Yu. Osinceva A.L. Davydova (Pozdejeva) N.A. Eddy-Current Testing of the Fatigue Degradation of a Gas Powder Laser Clad NiCrBSi–Cr3C2 Composite Coating under Contact Fatigue Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040049. Full text>>
Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098. Full text>>
Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098. Full text>>
Vandyshev A.B. Kulikov V.A. Analysis of Parameters and Modes for Producing High-Purity Hydrogen from Natural Gas in Membrane-Catalytic Devices // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 1-2. P. 49-55.
Vandyshev A.B. Kulikov V.A. Energy and Resource Efficience in Industrial Systems for Production and Use of High-Purity Hydrogen // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 3-4. P. 166-170.
Savrai R.A. Makarov A.V. Malyigina I.Yu. Rogovaya S.A. Osinceva A.L. Improving the Strength of the AISI 321 Austenitic Stainless Steel by the Frictional Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.5.043-062. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 5. P. 43-62.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Role of the Strengthening Phases in Abrasive Wear Resistance of Laser-Clad NiCrBSi Coatings // Journal of Friction and Wear. 2017. Vol. 38. – No. 4. P. 272-278.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Determination of Safe Operating Conditions for Supporting Structures under Abnormal Loads // Journal of Machinery Manufacture and Reliability. 2017. Vol. 46. – No. 2. P. 142-148.
S.D. Neulybin Yu.D. Shchitsyn V.S. Verkhorubov Yu.S. Korobov M.A. Filippov Savrai R.A. Soboleva N.N. Metallurgical Processes During Plasma Remelting of a Metallized Coating of the Fe-C-Cr-Ti-Al System // Metallurgist. 2017. Vol. 60. – Nos. 11–12. P. 1202-1206.
Makarov A.V. N.V. Gavrilov G.V. Samoylova A.S. Mamaev Osinceva A.L. Savrai R.A. Effect of a Continuous and Gas-Cyclic Plasma Nitriding on the Quality of Nanostructured Austenitic Stainless Steel // Obrabotka Metallov – Metal Working and Material Science. 2017. Вып. 2. P. 55-66.
Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Makarov A.V. N.L. Pecherkina Structure and Mechanical Properties of a High-Carbon Steel Subjected to Severe Deformation // Physics of Metals and Metallography. 2017. Vol. 118. – No. 10. P. 1006-1014.
Makarov A.V. Luchko S.N. Shabashov V.A. Volkova E.G. Zamatovskii A.E. Osinceva A.L. Litvinov A.V. Sagaradze V.V. Structural and phase transformations and micromechanical properties of the high-nitrogen austenitic steel deformed by shear under pressure // Physics of Metals and Metallography. 2017. Vol. 118. – No. 1. P. 52-64.
Makarov A.V. Skorynina P.A. A.S. Yurovskikh Osinceva A.L. Effect of the Conditions of the Nanostructuring Frictional Treatment Process on the Structural and Phase States and the Strengthening of Metastable Austenite Steel // Physics of Metals and Metallography. 2017. Vol. 118. – No. 12. P. 1225-1235.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Vehicle Survivability Calculation // Russian Journal of Construction Science and Technology. 2017. Vol. 3. – No. 1. P. 40-44.
Butorin D.E. Burov V.G. Burov S.V. Tolochko B.I. Bataev I.A. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. V. 60. – Is. 5. P. 817-820.
D.E. Butorin V.G. Burov Burov S.V. B.P. Tolochko I.A. Bataev. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. Vol. 60. – Iss. 5. P. 817-820.
Burov S.V. Khudorozhkova Yu.V. Dependence of Mechanical and Magnetic Properties of Hypereutectoid Steel on Excess Cementite Morphology [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. more in detail>>
Makarov A.V. Yakovleva S.P. Volkova E.G. Makharova S.N. Mordovskoy P.G. Special Features of the Formation of the Microstructure of the 09G2S Steel under Conditions of Cold and Warm Equal-Channel Angular Pressing [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. P. 39-47.
Makarov A.V. Davydova (Pozdejeva) N.A. Malyigina I.Yu. Lyzhin V.V. Korshunov L.G. Improving the Thermal Stability and Heat Wear Resistance of Carburized Chromium-Nickel Steel by Nanostructuring Frictional Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 5. P. 49-66.
Vandyshev A.B. Analyzing the Parameters of Membrane Catalytic Systems for Extraction of Highly Pure Hydrogen from Hydrocarbon Feedstock with the Application of Mathematical Modeling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 6-45.
Savrai R.A. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The Behavior of Gas Powder Laser Clad NiCrBSi Coatings under Contact Loading // Journal of Materials Engineering and Performance. 2016. Vol. 23. – Is. 3. P. 1068-1075.
Gorkunov E.S. Senaeva (Pugacheva) E.I. Zadvorkin S.M. Makarov A.V. Pecherkina N.L. Kalinin G.Yu. Mushnikova S.Yu. Fomina O.V. Investigation of the Structure and Properties of the Material of Various Zones of the Welded Joint of the Austenitic Nitrogen-Containing Steel upon Elastoplastic Deformation // Physics of Metals and Metallography. 2016. Vol. 117. – No. 11. P. 1153-1163.
Bataev A.A. Burov S.V. Bataev I.A. Burov V.G. Stability Analysis of the Copper Surface Layer Structure in the Process of Sliding Friction by the Method of Diffraction Analysis Using Synchrotron Radiation // Russian Physics Journal. 2016. Vol. 59. – Iss. 2. P. 314-316.
Makarov A.V. Gorkunov E.S. Skorynina P.A. Kogan L.Kh. Yurovskikh A.S. Osinceva A.L. Eddy-Current Control of the Phase Composition and Hardness of Metastable Austenitic Steel after Different Modes of Nanostructuring Attrition Treatment // Russian Journal of Nondestructive Testing. 2016. V. 52. – No. 11. P. 627-637.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. The Definition of the Resistance Area Boundaries for a Locomotive Operator Cab under Non-Regulated Loads // AIP Conf. Proc. 2016. Vol. 1785. – 040014. – http://dx.doi.org/10.1063/1.4967071.
Khudorozhkova Yu.V. Kamantsev I.S. Burov S.V. The Features of Phase Transformations and Structural Changes in Steels with Stable and Metastable Austenite under Fatigue Loading // AIP Conf. Proc. 2016. Vol. 1785. – 040025. – http://dx.doi.org/10.1063/1.4967082.
Savrai R.A. Makarov A.V. Gorkunov E.S. Pecherkina N.L. Rogovaya S.A. Osinceva A.L. Kalinin G.Yu. Mushnikova S.Yu. The Effect of Temperature on the Mechanical Characteristics of the Nitrogen-Containing 04Kh20N6G11M2AFB Steel under Static Tension // AIP Conf. Proc. 2016. Vol. 1785. – 030026. – http://dx.doi.org/10.1063/1.4967047.
Soboleva N.N. Makarov A.V. Malyigina I.Yu. Savrai R.A. Wear Resistance of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2016. Vol. 1785. – 030028. – http://dx.doi.org/10.1063/1.4967049.
Soboleva N.N. Makarov A.V. Malyigina I.Yu. Osinceva A.L. The formation of NiCrBSi coatings with increased wear resistance by gas powder laser cladding // Abstracts of International Congress on Energy Fluxes and Radiation Effects, Tomsk, Russia, 21-26 September,. Tomsk: Publishing House of IAO SB RAS, 2015. 336 p.
Emelyanov I.G. Investigation into the Contact Interaction between Shell and Base with Notches // Journal of Machinery Manufacture and Reliability. 2015. Vol. 44. No. 3. P. 263-270.
Gorkunov E.S. Senaeva (Pugacheva) E.I. Zadvorkin S.M. Makarov A.V. Pecherkina N.L. Kalinin G.Yu. Mushnikova S.Yu. Fomina O.V. Behavior of Magnetic Characteristics in Promising Nitrogen-Containing Steels upon Elastoplastic Deformation // Physics of Metals and Metallography. 2015. Vol. 116. Is. 8. P. 838-849.
Vandyshev A.B. Kulikov V.A. Analysis of parameters of high-purity hydrogen production from methane in a laboratory-scale membrane reformer with an ultrathin palladium membrane // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 3-4. P. 250-256. DOI 10.1007/s10556-015-0032-1.
Vandyshev A.B. Kulikov V.A. Hydrogen Permeability of Palladium Membranes Made of Alloy V-1 in Laboratory Investigations And Membrane Devices // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 5-6. P. 396-401. DOI 10.1007/s10556-015-0058-4.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. Formation of wear-resistant chromium-nickel coating with extra high thermal stability by combined laser-and-heat treatment // Metal Science and Heat Treatment. 2015. V. 57. No. 3-4. P. 161-168.
Makarov A.V. Savrai R.A. Gorkunov E.S. Yurovkikh A.S. Malyigina I.Yu. Davydova (Pozdejeva) N.A. Structure, Mechanical Characteristics, and Deformation and Fracture Features of Quenched Structural Steel under Static and Cyclic Loading after Combined Strain-Heat Nanostructuring Treatment // Physical Mesomechanics. 2015. Vol. 18. No. 1. P. 43-57.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. On an approach to the evaluation of the strength of a spatial rod system under impact loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 16-23.
Gorkunov E.S. Savrai R.A. Makarov A.V. Zadvorkin S.M. Magnetic techniques for estimating elastic and plastic strains in steels under cyclic loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 6-15.
Makarov A.V. Mitropolskaya S.Yu. Maltseva L.A. Levina A.V. Progress in ultra-deformable stainless steels for medical tool application [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 44-56. URL: http://dream-journal.org/DREAM_Issue_2_2015_Maltseva_L.A._et_al._44_56.pdf.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The Tribological Performances of a NiCrBSi – TiC Laser-Clad Composite Coating under Abrasion and Sliding Friction [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 83-97. URL: http://dream-journal.org/issues/2015-3/2015-3_33.html.
Vandyshev A.B. Kulikov V.A. Calculating the main parameters of a Membrane Reformer with a Production Rate of 40 m3/h Designed for Producing Highly Pure Hydrogen from Natural Gas [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 109-121. URL: http://dream-journal.org/issues/2015-3/2015-3_31.html.
Vandyshev A.B. Kulikov V.A. Preparation of specially pure hydrogen from dimethyl ester in a high-temperature converter-membrane equipment system with catalytic conversion of CH4 or CO in the space above a membrane // Chemical and Petroleum Engineering. 2014. Vol. 49, No 9-10. P. 660-667.
Burov S.V. Khudorozhkova Yu.V. The influence of cooling rate on the morphology of cementite in hypereutectoid steel // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 153 p.
Khudorozhkova Yu.V. Burov S.V. Investigation into the structure and properties of wear-resistant coatings based on chromium metastable austenite // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 154 p.
Gorkunov E.S. Taratorkin A.I. Makarov A.V. Magnetic techniques for estimating elastic and plastic strains in steels under cycliс loading // Chapter in book Advanced Dynamics and Model Based Control of Structures and Machines / Eds. A.K. Belyaev, Hans Irschik, Michael Krommer: – , 2014, XVIII, 316 p. Springer, 2014. Chapter 15. P. 137-144.
