Savrai R.A. Toporova D.V. Bykova (Gurchenko) T.M. Improving the quality of AISI H13 tool steel produced by selective laser melting // Optics and Laser Technology. 2022. V. 152. Art. 108128. [10.1016/j.optlastec.2022.108128].
Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Structure and Properties of a SHS Cu–Ti–C–B Composite // Physics of Metals and Metallography. 2022. Vol. 123. No. 1. P. 43-49. [10.1134/S0031918X22010100].
Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Khudorozhkova Yu.V. Constructing a two-level computational model of cross-ply fiberglass-reinforced plastic from micromechanical testing // Polymers and Polymer Composites. 2022. Vol. 30. P. 1–13. [10.1177/09673911221112414].
Farber V.M. Morozova A.N. Khotinov V.A. Vichuzhanin D.I. Karabanalov M.S. Veretennikova (Golubkova) I.A. Lüders Deformation in Specimens Made of Normalized 09G2S Steel // Procedia Structural Integrity. 2022. Vol. 40. P. 129-135. [10.1016/j.prostr.2022.04.017].
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Micromechanical Properties and Character of Fracture after Cross-Bending of the SHS Composite by the Fe-Ni-Ti-C-B System // Procedia Structural Integrity. 2022. Vol. 40. P. 372-377. [10.1016/j.prostr.2022.04.050].
Smirnov S.V. Myasnikova M.V. Numeral Simulation of Damage and Fracture in Structurally Inhomogeneous Materials Subjected to Deformation // Procedia Structural Integrity. 2022. Vol. 40. P. 378-384. [10.1016/j.prostr.2022.04.051].
Osipova V.A. Gorbunova T.I. Barabanov M.A. Mekhaev A.V. Vichuzhanin D.I. Smirnov S.V. Pestov A.V. New Epoxy Resin Polymerization Catalysts Based on N,N-Dimethylaminoalkylamides of Perfl uoroalkanoic Acids // Russian Journal of Applied Chemistry. 2022. Vol. 95. No. 1. P. 53-58. [10.1134/S1070427222010074].
Farber V.M. Morozova A.N. Vichuzhanin D.I. Zhilyakov A.Yu. Structure of Chernov–Luders Band in Normalized Steel 09G2S. Part II. Deformation Zone // Metal Science and Heat Treatment. 2022. [10.1007/s11041-022-00825-7].
Mushnikov A.N. Zadvorkin S.M. Perunov E.N. Vyskrebencev S.V. Izmajlov R.F. Vichuzhanin D.I. Soboleva N.N. Igumnov A.S. Experimental facility for studying the physical properties of materials in a plane stress state // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 4. P. 50-60. [10.17804/2410-9908.2022.4.050-060].
Pugacheva (Vandysheva) N.B. Polyakov P.A. The effect of boron on the protective properties of aluminide coatings // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 6. P. 25–34. [10.17804/2410-9908.2022.6.025-034].
Struzhanov V.V. On one model of deformation in laminated composites // Diagnostics, Resource and Mechanics of materials and structures. 2022. Iss. 1. P. 16–24. [10.17804/2410-9908.2022.1.016-024].
Nikolin Yu.V. Vichuzhanin D.I. Pugacheva (Vandysheva) N.B. Mezin F.I. Studying the adhesion strength of plasma powder metal coatings on the surface of graphite // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 5. P. 23–39. [10.17804/2410-9908.2022.5.023-039].
Struzhanov V.V. Chaikin A.E. Destruction of a protective pipe coating under cyclic loading by internal pressure // Diagnostics, Resource and Mechanics of Materials and Structures. 2022. Iss. 2. P. 55– 66. [10.17804/2410-9908.2022.2.055-066].
Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Konovalov A.V. Kanakin V.S. Using the Instrumented Indentation Technique to Determine Damage in Sintered Metal Matrix Composites after High-Temperature Deformation // Applied Sciences-Basel. 2021. Vol. 11. Iss. 22. 10590. https://doi.org/10.3390/app112210590.
Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Nedzvetsky P.D. Brittle fracture resistance and damping properties of layered metal-polymer composites // Letters on Materials. 2021. Vol. 11. Iss. 3. P. 279-284. DOI: https://doi.org/10.22226/2410-3535-2021-3-279-284.
Kruchkov D.I. Smirnov S.V. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Bykova (Gurchenko) T.M. Influence of All-Round Forging under Short-Term Creep Conditions on the Structure and Mechanical Properties of the Al7075/10SiCp Composite with an Aluminum Matrix // Physics of Metals and Metallography. 2021. Vol. 122. No. 10. P. 981-990. DOI: 10.1134/S0031918X21100069.
Pugacheva (Vandysheva) N.B. Kruchkov D.I. Nesterenko A.V. Smirnov S.V. Shveikin V.P. Studying the Short-Term High-Temperature Creep in the Al–6Zn–2.5Mg–2Cu/10SiCp Aluminum Matrix Composite // Physics of Metals and Metallography. 2021. Vol. 122. No. 8. P. 782-788. DOI: 10.1134/S0031918X21080111.
Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov Aleksander Adhesive Strength of an Epoxy-Based Adhesive Joint Under a Complex Stress State // Procedia Structural Integrity. 2021. Vol. 33. P. 259-264. DOI: 10.1016/j.prostr.2021.10.032.
Guzanov B.N. Pugacheva (Vandysheva) N.B. Slukin E.Yu. Bykova (Gurchenko) T.M. Technology of Obtaining Composite Conglomerate Powders for Plasma Spraying of High-Temperature Protective Coatings // Obrabotka Metallov - Metal Working and Material Science. 2021. Vol. 23. No. 1. P. 6-20. DOI: 10.17212/1994-6309-2021-23.1-6-20.
Pugacheva (Vandysheva) N.B. Nikolin Y. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Influence of the chemical composition of the matrix on the structure and properties of monolithic SHS composites // Obrabotka Metallov - Metal Working and Material Science. 2021. Vol. 23. No. 3. P. 124-138. DOI: 10.17212/1994-6309-2021-23.3-124-138.
Guzanov B.N. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Erosion Resistance of a Combined Multilayer Coating Protecting Critical Parts of Modern Gas Turbine Engines [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 2. P. 6-21. DOI: 10.17804/2410-9908.2021.2.006-021.
Pugacheva (Vandysheva) N.B. Guzanov B.N. Studying the chemical and phase compositions of a chromium-nickel-manganese steel after operation at elevated temperatures in corrosive environments // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 17–30. DOI: 10.17804/2410-9908.2021.3.017-030.
Struzhanov V.V. On One Problem of Determining the Optimal Residual Stress Field [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 55-63. DOI: 10.17804/2410-9908.2021.1.055-063.
Struzhanov V.V. On the Rational Choice of the Properties of Structural Elements Constituting Unidirectional Compositions [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 45-54. DOI: 10.17804/2410-9908.2021.3.045-054.
Gladkovsky S.V. Konovalov D.A. Petrova (Kuteneva) S.V. Yield Strength Evaluation of Dissimilar Components of Layered Steel/Steel Composite by Kinetic Indentation // Journal of Materials Engineering and Performance. 2020. Vol. 29. P. 5757–5763. https://doi.org/10.1007/s11665-020-05083-3.
Filippov M.A. Sharapova V.A. Shveikin V.P. Nikiforova S.M. Plotnikov G.N. Michurov N.S. Heat Treatment of Wear-Resistant Cast Iron at High and Low Temperatures // AIP Conference Proceedings. 2020. Vol. 2315. 050005. https://doi.org/10.1063/5.0037190.
Filippov A.A. Fomin V.M. Veretennikova (Golubkova) I.A. Smirnov S.V. Investigation of elastic modulus of heterogeneous materials based on epoxy resin filled with silicon dioxide nanoparticles by nanoindentation // AIP Conference Proceedings. 2020. Vol. 2310. 020094. https://doi.org/10.1063/5.0034462.
Konovalov D.A. Kozlov A.V. Konovalov A.V. Features of the Forming of a Ring-Shaped Specimen Under Axial Compression with a Flat Die // AIP Conference Proceedings. 2020. Vol. 2315. – 020022. https://doi.org/10.1063/5.0036914.
Konovalov D.A. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. Estimating the Repeatability of Experimental Data Obtained in Scratch Testing of a Polymer Epoxy Coating // AIP Conference Proceedings. 2020. Vol. 2315. 040021. https://doi.org/10.1063/5.0036919.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Effect of the Laser Welding Conditions on the Chemical Composition of the AISI 321/Cu/Ti Material // AIP Conference Proceedings. 2020. Vol. 2315. 030015. https://doi.org/10.1063/5.0036864.
Smirnov S.V. Myasnikova M.V. Michurov N.S. Igumnov A.S. Numerical Simulation of the Stress-Strain State in a Polymer Coating Surface Layer Under Creep During Indentation // AIP Conference Proceedings. 2020. Vol. 2315. 020041. https://doi.org/10.1063/5.0036684.
Struzhanov V.V. Chaikin A.E. Destruction of a Thin-Walled Spherical Vessel by Internal Pressure // AIP Conference Proceedings. 2020. Vol. 2315. 020044. https://doi.org/10.1063/5.0036729.
Mironov V.I. Ogorelkov D. A. Laptev A.A. Lukashuk O.A. Impact of damping on decay time of free oscillations in metal structures // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 862. 022027. DOI: 10.1088/1757-899X/862/2/022027.
Baraz V.R. Gerasimov S.S. Gruzdeva I.A.. Chemesova A.V. Shveikin V.P. Ovchinnikova A.O. Veretennikova (Golubkova) I.A. The additive technology to obtain a three-dimensional model of the 81Cu-19Ni alloy // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012119. DOI: 10.1088/1757-899X/966/1/012119.
Smirnov S.V. Veretennikova (Golubkova) I.A. Konovalov D.A. Effect of nanosized oxide fillers on the adhesive strength of epoxy lacquer under scratching // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 044007. doi:10.1088/1757-899X/709/4/044007.
Smirnova (Yekzemplyarova) E.O. Smirnov A.S. Aleksandrov S.E. Formation of a narrow hard layer in the AlMg6 alloy near the contact surface after extrusion through a conical die // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033115. doi:10.1088/1757-899X/709/3/033115.
Gladkovsky S.V. Konovalov D.A. Petrova (Kuteneva) S.V. Yield Strength Evaluation of Dissimilar Components of Layered Steel/Steel Composite by Kinetic Indentation // Journal of Materials Engineering and Performance. 2020. Vol. 29. P. 5757–5763. https://doi.org/10.1007/s11665-020-05083-3.
Gushchina N.V. Makhin'ko F.F. Ovchinnikov V.V. Kaigorodova L.I. Rasposienko D.Yu. Vichuzhanin D.I. Ion irradiation effect (Ar+, E = 20-40 keV) on the mechanical properties and microstructure of aluminum V95 alloy // Journal of Physics: Conference Series. 2020. Vol. 1713. 012018. doi:10.1088/1742-6596/1713/1/012018.
Pugacheva (Vandysheva) N.B. Babaylov N.A. Bykova (Gurchenko) T.M. Loginov Yu.N. The Structure, Phase Composition and Micromechanical Properties of Briquetted Aluminum // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Working and Material Science. 2020. Vol. 22. No. 3. P. 82-94. DOI: 10.17212/1994-6309-2020-22.3-82-94.
Bogdanova E.A. Veretennikova (Golubkova) I.A. Investigation of sintering features of ceramic materials based on hydroxyapatite and its substituted forms // Physical and Chemical Aspects of the Study of Clusters Nanostructures and Nanomaterials. 2020. Iss. 12. P. 535-545. DOI: 10.26456/pcascnn/2020.12.535.
Pugacheva (Vandysheva) N.B. Orishich A.M. Cherepanov A.N. Senaeva (Pugacheva) E.I. Trushina E.B. Trushina. Study of the Chemical Composition and Microstructure of AISI 321/Cu/Ta/Ti Welded Joint // Physics of Metals and Metallography. 2020. Vol. 121. No. 11. P. 1112-1118. DOI: 10.1134/S0031918X20110083.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Zamaraev L.M. The Effect of Atmosphere Composition on the Mechanism of Destruction of a Boride Coating on the Surface of a Die Steel during Thermal Cycling // Physics of Metals and Metallography. 2020. Vol. 121. No. 6. P. 590-596. DOI: 10.1134/S0031918X20060113.
Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov A.V. Smirnova (Yekzemplyarova) E.O. Effect of modifying dopes on the mechanical properties of epoxy coatings affected by thermocycling // Procedia Structural Integrity. 2020. Vol. 25. P. 209-213. DOI: 10.1016/j.prostr.2020.04.025.
Smirnov S.V. Veretennikova (Golubkova) I.A. Vichuzhanin D.I. Pestov A.V. Smirnova (Yekzemplyarova) E.O. The effect of Stress State on the Adhesive Strength of a Glued Sandwich in Shear-Compression Testing // Procedia Structural Integrity. 2020. Vol. 28. P. 234-238. DOI: 10.1016/j.prostr.2020.10.029.
Pestov A.V. Osipova V.A. Koryakova O.V. Gorbunova T.I. Smirnov S.V. Veretennikova (Golubkova) I.A. Preparation of a New Material Based on Epoxy Oligomers for Forming Corrosion-Protective Coatings // Russian Journal of Applied Chemistry. 2020. Vol. 93. P. 400-405. DOI: 10.1134/S107042722003012X.
Konovalov D.A. Veretennikova (Golubkova) I.A. Bykova (Gurchenko) T.M. Michurov N.S. Development of an Approach to Determining the Representative Volume Element of the Al/SiC Metal Matrix Composite Material Fabricated by Squeeze Casting // Russian Metallurgy. 2020. Vol. 2020. No. 7. P. 738–745. DOI: 10.1134/S0036029520070101.
Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Alexandrov S. A New Experimental Method for Determining the Thickness of Thin Surface Layers of Intensive Plastic Deformation Using Electron Backscatter Diffraction Data // Symmetry-Basel. 2020. ol. 12. Iss. 4. article 677. DOI: 10.3390/sym12040677.
Struzhanov V.V. Integro-differential equations of the second boundary value problem of linear elasticity theory. Communication 2. Inhomogeneous anisotropic body // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 1. P. 199-208. DOI: 10.14498/vsgtu1730.
Struzhanov V.V. Korkin A.V. On the solution of one problem of deformation of rod systems that does not satisfy the Hadamard conditions by the simple iteration method // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2020. Vol 24. Iss. 3. P. 595-603. https://doi.org/10.14498/vsgtu1787.
Farber V.M. Khotinov V.A. Polukhina O.N. Selivanova O.V. Morozova A.N. Vichuzhanin D.I. Effect of Strain Aging on Stages of Plastic Strain and Tensile Fracture of Specimens of Steel 08G2B. Part II. Stage of Concentrated Strain // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 7-8. P. 464-468. https://doi.org/10.1007/s11041-020-00585-2.
Farber V.M. Khotinov V.A. Polukhina O.N. Selivanova O.V. Morozova A.N. Vichuzhanin D.I. Effect of Strain Aging on Stages of Plastic Strain and Tensile Fracture of Specimens of Steel 08G2B. Part I. Yield Plateau and the Stage of Strain Hardening // Metal Science and Heat Treatment. 2020. Vol. 62. Nos. 7-8. P. 457-463. https://doi.org/10.1007/s11041-020-00584-3.
Kruchkov D.I. Nesterenko A.V. A review of experimental studies of creep behavior and superplasticity in a discontinuous SiC aluminum-matrix composites // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 1. P. 130–157. DOI: 10.17212/1994-6309-2020-22.2-130-157. (In Russian).
Anakhov S.V. Guzanov B.N. Matushkin A.V. Pugacheva (Vandysheva) N.B. Pykin Yu.A. Influence of Plasma Torch Design on Cutting Quality during Precision Air-Plasma Cutting of Metal // Steel in Translation. 2020. Vol. 50. No. 3. P. 159–165. DOI: 10.3103/S096709122003002X.
Gladkovsky S.V. Nedzvetsky P.D. Vichuzhanin D.I. Petrova (Kuteneva) S.V. Lepikhin S.V. Brittle Fracture Resistance and Damping Properties of a Steel-Rubber Metal-Polymer Composite [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 2. P. 6-18. DOI: 10.17804/2410-9908.2020.2.006-018.
Struzhanov V.V. Chaikin A.E. Determining the Moment of Destruction of Protective Coatings on Pipes and Spherical Vessels [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 3. P. 6-18. DOI: 10.17804/2410-9908.2020.3.006-018.
Mironov V.I. Emelyanov I.G. Vichuzhanin D.I. Zamaraev L.M. Ogorelkov D. A. Yakovlev V.V. Effect of Hydrogenation Temperature and Tensile Stress on the Parameters of the Complete Deformation Diagram for Steel 09G2S [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures.. 2020. Iss. 1. P. 24-33. DOI: 10.17804/2410-9908.2020.1.024-033.
Anakhov S.V. Guzanov B.N. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Matyshkin A.V. The Influence of the Constructive Features of the Plasmotron on the Quality of the Cut During Air-Plasma Cutting of Sheet Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 5. P. 58-69. DOI: 10.17804/2410-9908.2020.5.058-069.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. A Study of Boriding Methods, An Analysis of the Structure and Properties of the Obtained Coatings [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. Iss. 2, 2020. P. 38-60. DOI: 10.17804/2410-9908.2020.2.038-060.
Zamaraev L.M. Short-term high-temperature creep of Grade 5 titanium alloy heated in air and argon // Letters on Materials. 2019. Vol. 9 No. 3. P. 294-298. https://doi.org/10.22226/2410-3535-2019-3-294-298.
Khotinov V.A. Polukhina O.N. Vichuzhanin D.I. Schapov G.V. Farber V.M. Study of Luders Deformation in Ultrafine Low-Carbon Steel by the Digital Image Correlation Technique / Letters on Materials. 2019. Vol. 9. No. 3. P. 310-315. https://doi.org/10.22226/2410-3535-2019-3-328-333.
Veretennikova (Golubkova) I.A. Konovalov D.A. Smirnov S.V. Zadvorkin S.M. Putilova E. A. Kamantsev I.S. Effect of Steplike Plastic Deformation on the Mechanical Properties and the Fracture of the Bimetal Produced by Exposition Welding / Russian Metallurgy (Metally). 2019. Vol. 2019. No. 5. P. 556–564. DOI: 10.1134/S0036029519050124.
Zamaraev L.M. Short-term high-temperature creep of Grade 5 titanium alloy heated in air and argon // Letters on Materials. 2019. Vol. 9. No. 3. P. 294-298. https://doi.org/10.22226/2410-3535-2019-3-294-298.
Smirnov S.V. Veretennikova (Golubkova) I.A. Fomin V.M. Filippov A.A. Brusentseva T.A. Studying the Viscoelastic Properties of an Epoxy Resin Strengthened with Silicon Dioxide Nanoparticles by Instrumented Microindentation // Mechanics of Composite Materials. 2019. Vol. 55. No. 3. P. 337-348. DOI: 10.1007/s11029-019-09816-x.
Kaigorodova L.I. Rasposienko D.Y. Pushin V.G. Pilyugin V.P. Smirnov S.V. Effect of Annealing on the Structure and Properties of the Aging Al-Li-Cu-Mg-Zr-Sc-Zn Alloy Subjected to Megaplastic Strain // Physics of Metals and Metallography. 2019. Vol. 120. No. 2. P. 157–163. DOI: 10.1134/S0031918X19020066.
Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Senaeva (Pugacheva) E.I. Malyigina I.Yu. Structure of Fe-Ni-Ti-C-B SHS Copmposites // Physics of Metals and Metallography. 2019. Vol. 120. No. 11. P. 1078-1084. DOI: 10.1134/S0031918X19110139.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Goruleva L.S. Makarov A.V. Volkova E.G. Microstructure of a Laser-Welded Joint between a Chromium – Nickel Steel and a Titanium Alloy with a Copper Insert // Physics of Metals and Metallography. 2019. Vol. 120. No. 8. P. 775-781. DOI: 10.1134/S0031918X1908012X.
Farber V.M. Polukhina O.N. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. A Study of Plastic Deformation of 08G2B Steel before and at the Yield Plateau by Digital Image Correlation Technique. Part 1. Formation of Plastic and Elastic Deformation Waves // Metal Science and Heat Treatment. 2019. Vol. 61. Nos. 5-6. P. 274-279. DOI: 10.1007/s11041-019-00416-z.
Farber V.M. Polukhina O.N. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. A Study of Plastic Strain before and on the Yield Plateau of Steel 08G2B by Correlation of Digital Images. Part II. Functioning of Flow Channels and Zones in Them // Metal Science and Heat Treatment. 2019. Vol. 61. Nos. 7-8. P. 405-410. DOI 10.1007/s11041-019-00437-8.
Zalazinskiy A.G. Nesterenko A.V. Berezin I.M. Study of Compaction of the Titanium Powder by the Experimental-Analytical Method // Russian Journal of Non-Ferrous Metals. 2019. Vol. 60. No. 5. P. 499-503. https://dx.doi.org/10.3103/S1067821219050183.
Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.
Struzhanov V.V. On One Inverse Problem in the Theory of Eigenstresses // AIP Conference Proceedings. 2019. Vol. 2176. 040015. – https://doi.org/10.1063/1.5135164.
Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.
Smirnov S.V. Zamaraev L.M. Comparative Study of Shot Creep of Single-Phase Titanium Alloys in Air and Neutral Gas Environment on the Test Temperature in Range from 673 to 1323 K // Frattura ed Integrita Strutturale. 2019. Iss. 49. P. 201-211. DOI: 10.3221/IGF-ESIS.49.21.
Anakhov S.V. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Guzanov B.N. Matushkin A.V. Pykin Yu.A. Substantiation of the Narrow-Jet Plasma Technology for Finishing Cutting of Steel sheets // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012004. – DOI: 10.1088/1757-899X/681/1/012004.
Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. EBSD analysis of the structure of a weld joining a chromium-nickel steel sheet and a titanium alloy sheet through a copper insert // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012034. – DOI: 10.1088/1757-899X/681/1/012034.
Pugacheva (Vandysheva) N.B. Makarov A.V. Senaeva (Pugacheva) E.I. Volkova E.G. Crystallization of Dissimilar Ti/Cu/ Steel Laser Welds // Journal of Crystal Growth. 2019. Vol. 526. Art. 125212. https://doi.org/10.1016/j.jcrysgro.2019.125212.
Gushchina N.V. Ovchinnikov V.V. Makhin'ko F.F. Vichuzhanin D.I. Effect of ion irradiation on low-cycle fatigue of pressed profiles of the V95 alloy after artificial aging // Journal of Physics: Conference Series. 2019. Vol. 1396. 012021. – DOI: 10.1088/1742-6596/1396/1/012021.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Kolobyilin Yu.M. Effect of laser alloying with the powder mixtures of Cu–Zn–Ti and Si–Cu on the structure and properties of cast aluminum alloy // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science. 2019. Vol. 21. No. 4. P. 70–84. DOI: 10.17212/1994-6309-2019-21.4-70-84.
Berezin I.M. Zalazinskiy A.G. Bykova (Gurchenko) T.M. Nesterenko A.V. Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die // PNRPU Mechanics Bulletin. 2019. No. 3. P. 5-16. DOI: 10.15593/perm.mech/2019.3.01.
Titov V.G. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Multi-Criteria Optimization by the “Ideal Point” Method of Raw Material Composition for Composite Blank Manufacturing // Izv. Vuzov Poroshk. Metallurgiya i funkts. pokrytiya. 2019. No. 2. P. 49-56. DOI dx.doi.org/10.17073/1997-308X-2019-2-49-56.
Rekov A.M. Vichuzhanin D.I. Strain Distribution in the Neck of a Flat Sample of Titanium VT1-00 under Uniaxial Tension // Mekhanika kompozitsionnykh materialov i konstruktsii. 2019. Vol. 25. No. 4. P. 522-530. DOI: 10.33113/mkmk.ras.2019.25.04.522_530.05.
Smirnov A.S. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Belozerov G. A. Konovalov A.V. Vichuzhanin D.I. Muizemnek O.Yu. Effect of Silicon Carbide Particles on the Mechanical and Plastic Properties of the AlMg6/10% SiC Metal Matrix Composite // Journal of Composite Materials. 2018. Vol. 52. Iss. 24. P. 3351–3363. DOI:10.1177/0021998318765622.
Konovalov D.A. Veretennikova (Golubkova) I.A. Study on mechanical properties of a bimetallic composite produced by explosion welding under incremental plastic deformation // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 215-219. DOI: 10.22226/2410-3535-2018-2-215-219.
Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Michurov N.S. The laser-welded joint of an austenitic corrosion-resistant steel and a titanium alloy with an intermediate copper insert // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 42-47. DOI: 10.22226/2410-3535-2018-1-42-47.
Vichuzhanin D.I. Yolshina I.A. Muradymo R.V. Nesterenko A.V. A fracture for 1 wt% aluminum-graphene metal matrix composite at 300ºC // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 184-189. DOI: 10.22226/2410-3535-2018-2-184-189.
Vichuzhanin D.I. Smirnov S.V. Nesterenko A.V. Igumnov A.S. A fracture Locus for a 10 Volume-Percent V95/SiC Metal Matrix Composite at the Near-Solidus Temperature // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 88-93. DOI: 10.22226/2410-3535-2018-1-88-93.
Kaigorodova L.I. Rasposienko D.Yu. Pushin V.G. Pilyugin V.P. Smirnov S.V. Influence of Severe Plastic Deformation on the Structure and Properties of Al-Li-Mg-Zr-Sc-Zn Alloy // Physics of Metals and Metallography. 2018. Vol. 119. – No. 2. – P. 161-168. – DOI: 10.1134/S0031918X18020060.
Berdnikov K.V. Struzhanov V.V. Equilibrium State of a Softening Elastoplastic Medium with an Expanding Spherical Cavity // Journal of Applied Mechanics and Technical Physics. 2018. Vol. 59. Iss. 1. P. 104-111. DOI: 10.1134/S0021894418010133.
Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Igumnov A.S. A Numerical Study of Plastic Strain Localization and Fracture in Al/SiC Metal Matrix Composite // Physical Mesomechanics. 2018. Vol. 21. – Iss. 4. – P. 305-313. – DOI: 10.1134/S1029959918040045.
Michurov N.S. Pugacheva (Vandysheva) N.B. Veretennikova (Golubkova) I.A. Khalevitskiy Yu.V. Smirnova (Yekzemplyarova) E.O. Igumnov A.S. Contribution of Intermetallics to the Formation of the Stress-Strain State of Tensile Welds on the AISI 321 Steel and the Grade 2 Titanium Alloy with a Copper Insert // AIP Conference Proceedings. 2018. Vol. 2053. – 040058. – https://doi.org/10.1063.
Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Malyigina I.Yu. Trushina E.B. Formation of the Structure of Fe-Ni-Ti-C-B Composites Under Self-Propagating High-Temperature Synthesis // AIP Conference Proceedings. 2018. Vol. 2053. 020013. https://doi.org/10.1063/1.5084359.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. Studying the Structure and Micromechanical Properties of a Hardfaced Wear-Resistant Coating // AIP Conference Proceedings. 2018. Vol. 2053. 040079. https://doi.org/10.1063/1.5084517.
Pugacheva (Vandysheva) N.B. Michurov N.S. Vichuzhanin D.I. Contribution of low-melting eutectics to the plastic deformation of aluminum matrix composites // AIP Conference Proceedings. 2018. Vol. 2051. 020247. https://doi.org/10.1063/1.5083490.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.
Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.
