Krylova S.E. Gladkovsky S.V. Romashkov E.V. Conceptual approach to development, structure formation and hardening micro-alloyed by steels for the metallurgical tool // Solid State Phenomena. 2020. Vol. 299. P. 658–663. https://doi.org/10.4028/www.scientific.net/SSP.299.658.
Lepikhin S.V. Gladkovsky S.V. Granovskii O.G. The Influence of Low-Temperature Restorative Heat Treatment on the Structure and Mechanical Properties of Boiler Drum Metal after Long-Term Operation // Thermal Engineering. 2020. Vol. 67. No. 2. P. 138–144. DOI: 10.1134/S0040601520020020.
Gladkovsky S.V. Nedzvetsky P.D. Vichuzhanin D.I. Petrova (Kuteneva) S.V. Lepikhin S.V. Brittle Fracture Resistance and Damping Properties of a Steel-Rubber Metal-Polymer Composite [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2020. Iss. 2. P. 6-18. DOI: 10.17804/2410-9908.2020.2.006-018.
Petrova (Kuteneva) S.V. Gladkovsky S.V. Dvoynikov D.A. Sergeev S.N. Microstructure and brittle fracture resistance of layered steel composites produced by explosion welding and pack rolling followed by heat treatment // Letters on Materials. 2019. Vol. 9. No. 4. P. 442-446. https://doi.org/10.22226/2410-3535-2019-4-442-446.
Vladimirov A.P. Kamantsev I.S. Drukarenko N.A. Gladkovsky S.V. Bukhvalov A.B. Khudorozhkova Yu.V. Cheremicina E.R. Gorkunov E.S. Nucleation and Initiation of Cracks under High-Cycle Fatigue in the EP679 Maraging Steel // AIP Conference Proceedings. 2019. Vol. 2176. 030019. – https://doi.org/10.1063/1.5135143.
Gladkovsky S.V. Petrova (Kuteneva) S.V. Sergeev S.N. Microstructure and mechanical properties of sandwich copper/steel composites produced by explosive welding // Materials Characterization. 2019. Vol. 154. P. 294–303. https://doi.org/10.1016/j.matchar.2019.06.008.
Krylova S.Е. Romashkov Е.V. Gladkovsky S.V. Kamantsev I.S. Special aspects of thermal treatment of steel for hot forming dies production // Materials Today: Proceedings. 2019. Vol. 19. P. 2540-2544. https://doi.org/10.1016/j.matpr.2019.08.197.
Prokhorov A. Plekhov O. Sudakov A. Gladkovsky S.V. Petrova (Kuteneva) S.V. Experimental study of high-strength steel under VHCF with external alternating magnetic field // Procedia Structural Integrity. 2019. Iss. 18. P. 802-808. 10.1016/j.prostr.2019.08.229.
Grokhovsky V.I. Gladkovsky S.V. Brittle fracture resistance of chinga and seymchan meteorites under static and impact loading // Meteoritics & Planetary Science. 2019. Vol. 54. Suppl. 2. – WOS: 000472113600138.
Fot A.P. Kamenev S.V. Krylova S.E. Tarova M.Yu. Gladkovsky S.V. Kamantsev I.S. Durability forecasting for the links plates of driving roller chains // Vestnik mashinostroeniya. 2019. № 2. P. 49-54.
Grokhovsky V.I. Gladkovsky S.V. The impact mechanical tests of seymchan and chinga meteorites // Meteoritics & Planetary Science. 2018. Vol. 53. P. 6276-6276.
Gladkovsky S.V. Kamantsev I.S. Petrova (Kuteneva) S.V. Dvoynikov D.A. Kuznetsov A.V. Layered Metal Composites with High Resistance to Brittle Fracture at Low Temperatures // AIP Conference Proceedings. 2018. Vol. 2053. 020003. https://doi.org/10.1063/1.5084349.
Gladkovsky S.V. Petrova (Kuteneva) S.V. Dvoynikov D.A. Veselova V.E. Parametrization of Powder for Al/B4C Metal Matrix Composites Using the Static Image Analysis Method // AIP Conference Proceedings. 2018. Vol. 2053. – 040026. – https://doi.org/10.1063/1.5084464.
Sergeev S.N. Safarov I.M. Galeyev R.M. Gladkovsky S.V. Dvoynikov D.A. Rogozhkin S.V. Iskandarov А.А. Korznikova G.F. Analysis of the Distribution of Alloying Elements in Ultrafine-Grained Steel 05G2MFBT by Atom-Probe Tomography // IOP Conference Series: Materials Science and Engineering. 2018. Vol. 447. 012009. doi:10.1088/1757-899X/447/1/012009.
Saraev Yu.N. Gladkovsky S.V. Lepikhin S.V. Kamantsev I.S. Lunev A.G. Perovskaya. Investigation of the influence of energy parameter of the covered-electrode welding on the impact strength characteristics and cracking resistance of the welded joints obtained // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science.. 2018. Vol. 20. No. 2. P. 100-115. DOI: 10.17212/1994-6309-2018-20.2-100-115.
Saraev Y.N. Gladkovsky S.V. Lunev A.G. Perovskaya M.V. Semenchuk V.M. Features of Formation of Structure and Physical and Mechanical Properties of Permanent Welded Joints of Low-Alloy Steels by Methods of Adaptive Pulse Control of Energy Parameters of Welding Mode // Materials Science Forum. 2018. Vol. 938. P. 124-131. DOI: 10.4028/www.scientific.net/MSF.938.124.
Gladkovsky S.V. Potapov A.I. Salikhyanov D.R. Rheological Properties and Substantiation of Hot Rolling Regimes of Low- and Medium Carbon Structural Steels // Solid State Phenomena. 2018. Vol. 284. P. 653-661. DOI:10.4028/www.scientific.net/SSP.284.653.
Yu.N. Saraev Gladkovsky S.V. S.V. Lepkhin Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of Welding Technology on Structure, Mechanical Properties and Fracture Toughness of 09G2S Steel Welded Joints [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. –DOI: 10.17804/2410-9908.2017.5.023-042. 2017. Iss. 5. P. 23-42.
Yu.N. Saraev Gladkovsky S.V. Lepikhin S.V. Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of the Welding Method on the Impact Strength and Cyclic Fracture Toughness Parameters of the 09G2S Steel // AIP Conf. Proc. 2017. Vol. 1915. – 030024. Full text>>
Gladkovsky S.V. Kamantsev I.S. Petrova (Kuteneva) S.V. Veselova V.E. M.A. Ryzhkov The Thermal Expansion and Thermophysical Properties of an Aluminum and Al/B4C composite // AIP Conf. Proc. 2017. Vol. 1915. – 030005. Full text>>
Gladkovsky S.V. Petrova (Kuteneva) S.V. Kamantsev I.S. R.M. Galeev S.N. Sergeev Dvoynikov D.A. Formation of the Mechanical Properties and Fracture Resistance Characteristics of Sandwich Composites Based on the 09G2S Steel and the EP678 High-Strength Steel of Various Dispersion [Electronic resource] – DOI: 10.17804/2410-9908.2017.6.071-09 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 71-90.
Yu.N. Saraev V.P. Bezborodov Gladkovsky S.V. N.I. Golikov Properties of the Welded Joints of Manganese Steel Made by Low-Frequency Pulsed Arc Welding // Russian Metallurgy (Metally). 2017. No. 4. P. 287-292.
Y.N. Saraev V.P. Bezborodov Gladkovsky S.V. N.I. Golikov Improving the reliability of metallic structures in service in the conditions with low climatic temperatures by efficient application of advanced methods of modification of the zone of the welded joint // Welding International. 2017. Vol. 31. – No. 8. P. 631-636.
S.V. Anakhov Gladkovsky S.V. S.V. Lepikhin Dvoynikov D.A. Y.A. Pykin A.V. Matushkin. Mechanical and technological properties of welded joints produced after plasma cutting // Welding International. 2017. Vol. 31. – No. 6. P. 445-451.
Safarov I.M. Korznikov A.V. Galeyev R.M. Sergeev S.N. Gladkovsky S.V. Pyshmintsev I.Yu. An Anomaly of the Temperature Dependence of the Impact Strength of Low-Carbon Steel with an Ultrafine-Grain Structure // Doklady Physics. 2016. Vol. 61. – No. 1. P. 15-18.
Safarov I.M. Korznikov A.V. Galeyev R.M. Sergeev S.N. Gladkovsky S.V. Dvoynikov D.A. Litovchenko I.Y. The ultrafine-grained structure, texture and mechanical properties of low carbon steel obtained by various methods of plastic deformation // Letters on Materials. 2016. Vol. 6. – Is. 2. P. 126-131.
Vladimirov A.P. Kamantsev I.S. Veselova V.E. Gorkunov E.S. Gladkovsky S.V. Use of Dynamic Speckle Interferometry for Contactless Diagnostics of Fatigue Crack Initiation and Determining Its Growth Rate // Technical Physics. 2016. Vol. 61. – No. 4. P. 563–568.
Saraev Yu.N. Gladkovsky S.V. Veselova V.E. Golikov N.I. Improving the Service Properties of Metal Structures Working in the Conditions of Low Climatic Temperatures by Methods of Adaptive Pulsed-Arc Welding // Welding International. 2016. Vol. 30. – No. 11. P. 884-890.
Mal'tseva L.A. Levina A.V. Loginov Yu.N. Gladkovsky S.V. Changes in the Structure and Properties Under Deformation of Austenitic-Ferritic Steel at Room and Negative Temperatures // Metal Science and Heat Treatment. 2016. Vol. 57. – Iss. 11-12. P. 645-651.
Gladkovsky S.V. Ishina E.A. Kuteneva S.V. Raising the Structural Strength of Systematically Alloyed Fe - Cr - Ni - Mo-Base Maraging Steels // Metal Science and Heat Treatment. 2016. Vol. 57. – Iss. 11-12. P. 663-668.
Gorkunov E.S. Gladkovsky S.V. Brittle Fracture Resistance of Chinga Ataxite at Different Mechanical Loading Conditions // Meteoritics & Planetary Science. 2016. Vol. 51. – Special Issue (SI). – A297.
Saraev Yu.N. Bezborodov V.P. Gladkovsky S.V. Golikov N.I. The ways of reliability enhancement of welded metal structures for critical applications in the conditions of low climatic temperatures // AIP Conference Proceedings. 2016. Vol. 1783. – 020195. – DOI: 10.1063/1.4966489.
Vladimirov A.P. Kamantsev I.S. Veselova V.E. Gladkovsky S.V. Using speckle images correlation for real-time inspection of fatigue crack initiation and propagation // Proc. of SPIE. 2015. Vol. 9525. P. 952525-1 - 952525-6.
Korznikov A.V. Dmitriev S.V. Kornikova G.F. Gladkovsky S.V. Potekaev A.I. The Effect of the Heat Treatment Regime on the Structure and Physical-Mechanical Properties of a 23X15KT Hard Magnetic Alloy // Russian Physics Journal. 2015. Vol. 57. Is. 10. P. 1308-1312.
Gladkovsky S.V. Potapov A.I. Lepikhin S.V. Studying the Deformation Resistance of Ep679 Maraging Steel [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 16-26. URL: http://dream-journal.org/issues/2015-4/2015-4_32.html.
Potapov A.I. Gladkovsky S.V. Kokovikhin E.A. Salikhyanov D.R. Dvoynikov D.A. Determining the plastic strain resistance of metallic materials on an automated plastometric complex [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 24-43.
Derevyagina L.S. Lemeshev N.M. Korznikov A.V. Gladkovsky S.V. Effect of Severe Plastic Deformation on the Structure, Mechanical Properties and Fracture Behavior of Low-Carbon Steel 12GBA // AIP Conference Proceedings. 2014. Vol. 1623. P. 103-106.
Popova O. P. Jenniskens Emel’yanenko V. Kartashova A. Biryukov E. Khaibrakhmanov S. Shuvalov V. Rybnov Y. Gladkovsky S.V. et al. Chelyabinsk airburst, damage assessment, meteorite recovery, and characterization // Science. 2013. Vol. 342. P. 1069-1073.
Gladkovsky S.V. Trunina T.A. Kokovikhin E.A. et al. Structural steel-aluminum sandwich composites based on low-carbon steel 006/IF // Metal Science and Heat Treatment. 2013. Vol. 55. – № 1-2. P. 3-7.
Grokhovsky V.I. Gladkovsky S.V. Ryzhkov M.A. et al. Mechanical and Thermal Properties of the Chelybinsk Meteorite // Meteoritics & Planetary Science. 2013. Vol. 48. – Special Issue: SI. – Supplement: 1. P. A147-A147.
Patselov A. Greenberg B. Gladkovsky S.V. Lavrikov R. Borodin E.M. Layered Metal-Intermetallic Composites in Ti-Al System: Strength under Static and Dynamic Load // AASRI Procedia. 2012. Vol. 3. P. 107-112.
Grokhovsky V.I. Gladkovsky S.V. The static and dynamic fracture toughness of Chinga ataxite // Meteoritics & Planetary Science. 2012. 47, А163 IF 2.719.
Petrova (Kuteneva) S.V. Gladkovsky S.V. Mechanical Properties and Microstructure of Layered Composites Based on Dissimilar Metals and Alloys / Conference Programme (Browsing) // Conference JUNIOR EUROMAT. 2012. 23-27 July, Lausanne, Switzerland [Электронный ресурс]. Режим доступа: http://www.dgm.de/tagungen/.
Grokhovsky V.I. Gladkovsky S.V. The impact mechanical tests of meteorites. Abstracts of 73rd Annual Meeting of the Meteoritical Society, New York, 26-30 July, 2010 // Meteoritics & Planetary Science. 2010. V.45,-P.A.69.
Efros B. Pilyugin V. Patselov A. Gladkovsky S.V. Efros N. Loladze L. Varyukhin V. Martensitic transitions in nanocrystalline metastable materials // Materials Science and Engineering A 503. 2009. 114–117.
Gorkunov E.S. Gladkovsky S.V. Mitropolskaya S.Yu. Zadvorkin S.M. Evolution of Magnetic Properties of Fe–Mn and Fe–Mn–Cr Steels with Different Stability of Austenite during Plastic Deformation // The Physics of Metals and Metallography. 2008. Vol. 105, No. 4. P. 343–350.
Efros B.M. Рilyugin V.P. Patselov A.M. Gladkovsky S.V. Efros N.B. Loladze L.V. Martensitic transformations in nanogrystalline Fe-Cr-Ni and Fe-Mn alloys // Nanostructured Materials by High-Pressure Severe Plastic Deformation.-Y.T. Zhu and V. Varyukhin (eds.).- Springer: Printed in the Netherlands. 2006. 121-126.
Efros B.M. Berezovskaya V.V. Gladkovsky S.V. Loladze L.V. Effects of hydrogen on delayed fracture of HCP epsilon-steels based on Fe-Mn solid solution // Hydrogen Materials Science and Chemistry of Carbon Nanomaterials. 2004. Vol.172, T.N.Vezirogly et al.(eds.), Kluver Academic Publishers. P. 313-318.
Gladkovsky S.V. Efros B.M. Loladze L.V. Deformation and properties of heterophase metastable steels under high hydrostatic pressures // High Pressure Research, An International Journal. 1990. Vol. 5. P. 900-902.
Gladkovsky S.V. Kuteneva S.V. Kamantsev I.S. Sergeev S.N. Safarov I.M. Effect of Plastic Deformation on the Structure and Mechanical Properties of an Ultra-Low Carbon Interstitial-Free Steel in the Monolithic State and in the Composition of a Sandwich Composite // Physics of Metals and Metallography. 0000. Vol. 117. – No. 10. P. 1070-1077.
