<< Васк | | Forward >>
  1. Smirnov S.V. Zamaraev L.M. Comparative Study of Shot Creep of Single-Phase Titanium Alloys in Air and Neutral Gas Environment on the Test Temperature in Range from 673 to 1323 K // Frattura ed Integrita Strutturale. 2019. Iss. 49. P. 201-211. DOI: 10.3221/IGF-ESIS.49.21.
    WoS 

  2. Kokovikhin E.A. Volkov V.P. Kamantsev I.S. Salikhyanov D.R. Plastometric Simulation of the Hot Rolling Process of Al/B4C Powder Composite // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 99-105. DOI: 10.18502/keg.v1i1.4396.
    WoS 

  3. Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Makarov A.V. Investigation of Structure and Properties of High-strength Bimetallic Materials Produced иy Explosion Welding and Have Been Exploited in Arctic Climate // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 231-238. DOI 10.18502/keg.v1i1.4414.
    WoS 

  4. Kazakov A.L. Kuznetsov P.A. Lempert A.A. Spevak L.F. Analytical and numerical solutions to the problem on a heat wave initiating for the nonlinear heat equation with a source // IOP Conf. Series: Journal of Physics: Conf. Series. 2019. Vol. 1268. 012030. – DOI:10.1088/1742-6596/1268/1/012030.
    WoS 

  5. Emelyanov I.G. Mironov V.I. Lukashuk O.A. Phenomenon of embrittlement in titanium shells from hydrogen exposure // IOP Conf. Series: Materials Science and Engineering. 2019. Vol. 537. 022067. DOI:10.1088/1757-899X/537/2/022067.
    WoS 

  6. Kazakov A.L. Spevak L.F. Lempert  A.A. Nefedova O.A. A computational algorithm for constructing a two-dimensional heat wave generated by a non-stationary boundary condition // IOP Conference Series: Journal of Physics: Conference Series. 2019. Vol. 1392. 012083. – DOI:10.1088/1742-6596/1392/1/012083.
    WoS 

  7. Alwan H.L. Korobov Yu.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Deviatiarov M.S. Elkind D.M. Behavior of a welded-deposited stainless steel tested at different cavitation test conditions // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012002. – DOI: 10.1088/1757-899X/681/1/012002.
    WoS 

  8. Anakhov S.V. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Guzanov B.N. Matushkin A.V. Pykin Yu.A. Substantiation of the Narrow-Jet Plasma Technology for Finishing Cutting of Steel sheets // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012004. – DOI: 10.1088/1757-899X/681/1/012004.
    WoS 

  9. Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. EBSD analysis of the structure of a weld joining a chromium-nickel steel sheet and a titanium alloy sheet through a copper insert // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012034. – DOI: 10.1088/1757-899X/681/1/012034.
    WoS 

  10. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Improving the properties of a rapidly crystallized NiCrBSi laser clad coating by high-temperature processing // Journal of Crystal Growth. 2019. Vol. 525. Art. 125200. – DOI: https://doi.org/10.1016/j.jcrysgro.2019.12520.
    WoS 

  11. Pugacheva (Vandysheva) N.B. Makarov A.V. Senaeva (Pugacheva) E.I. Volkova E.G. Crystallization of Dissimilar Ti/Cu/ Steel Laser Welds // Journal of Crystal Growth. 2019. Vol. 526. Art. 125212. https://doi.org/10.1016/j.jcrysgro.2019.125212.
    WoS 

  12. Savrai R.A. Malyigina I.Yu. Kolobyilin Yu.M. An Approach to Eddy-Current Evaluation of the Structural State in a Cast Aluminum–Silicon Alloy Subjected to Surface Laser Heat Treatment // Journal of Nondestructive Evaluation. 2019. Vol. 38. Is. 3. Art. 81. P. 1-7. https://doi.org/10.1007/s10921-019-0620-7.
    WoS 

  13. Vladimir Vykhodets Nefedova O.A. Kurennykh Tatiana Obukhov Sviatoslav Vykhodets Yevgenia Quantum Diffusion of Deuterium in Sodium // Journal of Physical Chemistry A. 2019. Vol. 123. P. 7536-7539. DOI: 10.1021/acs.jpca.9b06231.
    WoS 

  14. Kazakov A.L. Spevak L.F. Nefedova O.A. Solving a two-dimensional problem of heat wave initiation by a boundary condition specified on a movable manifold // Journal of Physics: Conf. Series. 2019. Vol. 1268. 012031. – DOI: 10.1088/1742-6596/1268/1/012031.
    WoS 

  15. Gushchina N.V. Ovchinnikov V.V. Makhin'ko F.F. Vichuzhanin D.I. Effect of ion irradiation on low-cycle fatigue of pressed profiles of the V95 alloy after artificial aging // Journal of Physics: Conference Series. 2019. Vol. 1396. 012021. – DOI: 10.1088/1742-6596/1396/1/012021.
    WoS 

  16. Menshakov A.I. Skorynina P.A. A new method of low-temperature cementation of stainless steel by decomposition of C2H2 in low-energy electron beam generated plasma // Journal of Physics: Conference Series. 2019. Vol. 1393. 012109. – DOI:10.1088/1742-6596/1393/1/012109.
    WoS 

  17. Emelyanov I.G. Polyakov A.A. Hodak  A.S. Stressed state of a steel construction working in hydrogen containing environment // Journal of Physics: Conference Series. 2019. Vol. 1391. 012027. – DOI: 10.1088/1742-6596/1391/1/012027.
    WoS 

  18. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Bazulin E.G. The Influence of Zero-to-Tension Loading on Magnetic and Acoustic Properties of 08G2B Hot-Rolled Steel // Journal of Physics: Conference Series. 2019. Vol. 1389. 012036. – https://doi.org/10.1088/1742-6596/1389/1/012036.
    WoS 

  19. Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Improving the Quality of Transmission Shifting Transients Due to Controlling Torque Redistribution // Journal of Vibration Engineering & Technologies. 2019. DOI: 10.1007/s42417-019-00183-4.
    WoS 

  20. Gladkovsky S.V. Petrova (Kuteneva) S.V. Sergeev S.N. Microstructure and mechanical properties of sandwich copper/steel composites produced by explosive welding // Materials Characterization. 2019. Vol. 154. P. 294–303. https://doi.org/10.1016/j.matchar.2019.06.008.
    WoS 

  21. Krylova S.Е. Romashkov Е.V. Gladkovsky S.V. Kamantsev I.S. Special aspects of thermal treatment of steel for hot forming dies production // Materials Today: Proceedings. 2019. Vol. 19. P. 2540-2544. https://doi.org/10.1016/j.matpr.2019.08.197.
    WoS 

  22. Filippov M.A. Sharapova V.A. Shveikin V.P. The effect of heat treatment on the ledeburitic class alloy abrasive wear-resistance // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 2581-2583. https://doi.org/10.1016/j.matpr.2019.08.252.
    WoS 

  23. Byval’tsev S. V. The mechanism of oxide film formation for drawing titanium // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 1949-1952. https://doi.org/10.1016/j.matpr.2019.07.048.
    WoS 

  24. Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Kolobyilin Yu.M. Effect of laser alloying with the powder mixtures of Cu–Zn–Ti and Si–Cu on the structure and properties of cast aluminum alloy // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science. 2019. Vol. 21. No. 4. P. 70–84. DOI: 10.17212/1994-6309-2019-21.4-70-84.
    WoS 

  25. Skorynina P.A. Makarov A.V. Men’shakov A.I. Osinceva A.L. Effect of low-temperature carburization in electron beam plasma on the hardening and surface roughness of the metastable austenitic steel // Obrabotka Metallov-Metal Working and Material Science. 2019. Vol. 21. No. 2. P. 97–109. DOI: 10.17212/1994-6309-2019-21.2-97-109.
    WoS 

  26. Korobov Yury Khudorozhkova Yu.V. Holger Hilli Vopneruk Alexander Kotelnikov Aleksandr Burov S.V. Balu  Prabu Makarov A.V. Chernov Alexey The Effect of Thickness on the Properties of Laser-Deposited NiBSi-WC Coating on a Cu-Cr-Zr Substrate // Photonics. 2019. Vol. 6. 127. – DOI: 10.3390/photonics6040127.
    WoS 

  27. Prokhorov A. Plekhov O. Sudakov A. Gladkovsky S.V. Petrova (Kuteneva) S.V. Experimental study of high-strength steel under VHCF with external alternating magnetic field // Procedia Structural Integrity. 2019. Iss. 18. P. 802-808. 10.1016/j.prostr.2019.08.229.
    WoS 

  28. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Effect of cyclic loading on the magnetic behavior of hot-rolled pipe steel 08G2B // Procedia Structural Integrity. 2019. Vol. 20. P. 4-8. 10.1016/j.prostr.2019.12.107.
    WoS 

  29. Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Increasing the Quality of Transient Processes in the Vehicle Transmission // Science & Technique. 2019. Vol. 18. No. 6. P. 509-518. https://doi.org/10.21122/2227-1031-2019-18-6-509-518.
    WoS 

  30. Filimonov A.Y. Trishin V.N. Model-Oriented Co-design of Homogeneous Computing Systems // VESTNIK TOMSKOGO GOSUDARSTVENNOGO UNIVERSITETA-UPRAVLENIE VYCHISLITELNAJA TEHNIKA I INFORMATIKA-TOMSK STATE UNIVERSITY JOURNAL OF CONTROL AND COMPUTER SCIENCE. 2019. No. 48. P. 67-73. DOI: 10.17223/19988605/48/8.
    WoS 

  31. Koroleva (Chekhomova) L.F. Synthesis and Abrasive Properties of Nanoparticulate Modified Solid Solution of Aluminum and Iron Oxides, DOI 10.1134/50002337X19060071 // Inorganic Materials. 2019. Vol. 55, No. 6. P. 556-562.
    WoS 

  32. Grokhovsky V.I. Gladkovsky S.V. Brittle fracture resistance of chinga and seymchan meteorites under static and impact loading // Meteoritics & Planetary Science. 2019. Vol. 54. Suppl. 2. – WOS: 000472113600138.
    WoS 

  33. Privalova V.V. Prosviryakov E.Yu. Simonov M.A. An Exact Solution for the Description of the Gradient Flow of a Vortex Fluid // AIP Conference Proceedings. 2019. Vol. 2176. – 020012. https://doi.org/10.1063/1.5135124.
    WoS 

  34. Volkov V.P. Salikhyanov D.R. On Ring Deformation be Internal Pressure // Izvestiya Ferrous Metallurgy. 2019. Vol. 62. Iss. 3. P. 195-200. DOI: 10.17073/0368-0797-2019-3-195-200.
    Scopus 

  35. Berezin I.M. Zalazinskiy A.G. Bykova (Gurchenko) T.M. Nesterenko A.V. Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die // PNRPU Mechanics Bulletin. 2019. No. 3. P. 5-16. DOI: 10.15593/perm.mech/2019.3.01.
    Scopus 

  36. Privalova V.V. Prosviryakov E.Yu. Simonov M.A. Nonlinear Gradient Flow of a Vertical Vortex Fluid in a Thin Layer // Russian Journal of Nonlinear Dynamics. 2019. Vol. 15. No. 3. P. 271-283. DOI: 10.20537/nd190306.
    Scopus 

  37. Fot A.P. Kamenev S.V. Krylova S.E. Tarova M.Yu. Gladkovsky S.V. Kamantsev I.S. Durability forecasting for the links plates of driving roller chains // Vestnik mashinostroeniya. 2019. № 2. P. 49-54.
    РИНЦ 

  38. Kruchkov D.I. Berezin I.M. Petunin A.A. Computer Simulation of the Stamping of a Long Sheet Blank of a Spherical Tank Element // Vestnik mashinostroeniya. 2019. № 2. P. 28-31.
    РИНЦ 

  39. Privalova V.V. Prosviryakov E.Yu. Nonlinear isobaric flow of a viscous incompressible fluid in a thin layer with permeable boundaries // Vichislitel’naya mekhanika sploshnyh sred. 2019. Vol. 12. No. 2. P. 230-242. DOI: 10.7242/1999-6691/2019.12.2.20.
    РИНЦ 

  40. Titov V.G. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Multi-Criteria Optimization by the “Ideal Point” Method of Raw Material Composition for Composite Blank Manufacturing // Izv. Vuzov Poroshk. Metallurgiya i funkts. pokrytiya. 2019. No. 2. P. 49-56. DOI dx.doi.org/10.17073/1997-308X-2019-2-49-56.
    РИНЦ 

  41. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Partin A.S. A Concept of Decision Making for Computer-Aided Arrangement of Parts within a Forging // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2019. No. 8. P. 37-44.
    РИНЦ 

  42. Rekov A.M. Vichuzhanin D.I. Strain Distribution in the Neck of a Flat Sample of Titanium VT1-00 under Uniaxial Tension // Mekhanika kompozitsionnykh materialov i konstruktsii. 2019. Vol. 25. No. 4. P. 522-530. DOI: 10.33113/mkmk.ras.2019.25.04.522_530.05.
    РИНЦ 

  43. Blagonravov A.A. Yurkevich A.V. Ensuring the highest possible energy efficiency of cars in urban traffic // Vestnik mashinostroeniya. 2019. No. 11. P. 47-49. DOI: 10.18411/B100-22011-T20191106.
    РИНЦ 

  44. L.N. Belsky Gorkunov E.S. S.F. Deryugin Lookin N.A. Life is a Relentless Creativity. On the 100th Anniversary of the Birth of Academician N.A. Semikhatov // Vestnik Rossiiskoi akademii nauk. 2019. Vol. 89. No. 1. P. 73-82.
    РИНЦ 

  45. Korobov Yury Michael Filippov Makarov A.V. Malyigina I.Yu. Soboleva N.N. Davide Fantozzi Milanti Andrea Heli Koivuluoto and Petri Vuoristo. Arc-Sprayed Fe-Based Coatings from CoredWires for Wear and Corrosion Protection in Power Engineering. 2018. Vol. 8. No. 71. DOI: 10.3390/coatings8020071.
    WoS  Scopus 

  46. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Interactive communication between the user and the computer-aided design system of shaft forging on presses. 2018. Vol. 224. 04001. DOI: https://doi.org/10.1051/matecconf/201822404001.
    WoS  Scopus 

  47. Prosviryakov E.Yu. New Class of Exact Solutions of Navier-Stokes Equations with Exponential Dependence of Velocity on Two Spatial Coordinates. 2018. Vol. 53. No. 1. P. 107-114. DOI: 10.1134/S0040579518060088.
    WoS  Scopus 

  48. Filippov M.A. Nikiforova S.M. Shveikin V.P. Sharapova V.A. Heat Treatment Forming a Dissipative Metal Base in Wear-Resistant Chromium-Alloyed Cast Iron // AIP Conference Proceedings. 2018. Vol. 2053. – 030016. – https://doi.org/10.1063/1.5084377.
    WoS  Scopus 

  49. Khalevitskiy Yu.V. Konovalov A.V. A gravitational approach to modeling the representative volume geometry of particle-reinforced metal matrix composites // Engineering with Computers. 2018. https://doi.org/10.1007/s00366-018-0649-8.
    WoS  Scopus 

  50. Kirillova V. Prosviryakov E.Yu. Diastolic dysfunction of the right ventricle as an early diagnostic marker of heart failure // European Journal of Heart Failure. 2018. Vol. 20 (Suppl. S1). P. 223-224. DOI: 10.1002/ejhf.1197.
    WoS  Scopus 

  51. Gorshkov A.V. Prosviryakov E.Yu. Ekman Convective Layer Flow of a Viscous Incompressible Fluid // Izvestiya. Atmospheric and Oceanic Physics. 2018. Vol. 54. – No. 2. P. 189–19. DOI: 10.7868/S0003351518020101.
    WoS  Scopus 

  52. Smirnov A.S. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Belozerov G. A. Konovalov A.V. Vichuzhanin D.I. Muizemnek O.Yu. Effect of Silicon Carbide Particles on the Mechanical and Plastic Properties of the AlMg6/10% SiC Metal Matrix Composite // Journal of Composite Materials. 2018. Vol. 52. Iss. 24. P. 3351–3363. DOI:10.1177/0021998318765622.
    WoS  Scopus 

  53. Vykhodets V.B. Nefedova O.A. Obukhov S.I. Kurennykh T.E. Danolov S.E. Vykhodets E.V. Application of the Nuclear Reaction Analysis Online Technique to Study the Diffusion of Deuterium in Metals // Journal of Experimental and Theoretical Physics Letters (JETP Letters). 2018. Vol. 107. – No. 4. P. 211-215.
    WoS  Scopus 

  54. Savrai R.A. Makarov A.V. Osinceva A.L. Malyigina I.Yu. Estimating the Contact Endurance of the AISI 321 Stainless Steel Under Contact Gigacycle Fatigue Tests // Journal of Materials Engineering and Performance. 2018. Vol. 27. Is. 2. P. 601-611.
    WoS  Scopus 

  55. Konovalov D.A. Veretennikova (Golubkova) I.A. Study on mechanical properties of a bimetallic composite produced by explosion welding under incremental plastic deformation // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 215-219. DOI: 10.22226/2410-3535-2018-2-215-219.
    WoS  Scopus 

  56. Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Michurov N.S. The laser-welded joint of an austenitic corrosion-resistant steel and a titanium alloy with an intermediate copper insert // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 42-47. DOI: 10.22226/2410-3535-2018-1-42-47.
    WoS  Scopus 

  57. Vichuzhanin D.I. Yolshina I.A. Muradymo R.V. Nesterenko A.V. A fracture for 1 wt% aluminum-graphene metal matrix composite at 300ºC // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 184-189. DOI: 10.22226/2410-3535-2018-2-184-189.
    WoS  Scopus 

  58. Vichuzhanin D.I. Smirnov S.V. Nesterenko A.V. Igumnov A.S. A fracture Locus for a 10 Volume-Percent V95/SiC Metal Matrix Composite at the Near-Solidus Temperature // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 88-93. DOI: 10.22226/2410-3535-2018-1-88-93.
    WoS  Scopus 

  59. Smolyaninov A. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Lapshin V. Survivability of the Locomotive Cabin at Interval Estimation of Obstacle Parameters // MATEC Web of Conferences. 2018. V. 216. 02021. doi.org/10.1051/matecconf/201821602021.
    WoS  Scopus 

  60. Gorkunov E.S. Application of Magnetoelastic Effects to the Evaluation of Elastic and Plastic Strains in Steel Structural Memebers // Matec Web of Conferences. 2018. V. 145. 05001. DOI: https://doi.org/10.1051/matecconf/201814505001.
    WoS  Scopus 

  61. Gorkunov E.S. Povolotskaya A.M. Pavel Nosov Zadvorkin S.M. Magnetic Flux Distribution in a Ferromagnetic Material Magnetized by U-Shaped Electromagnets of Different Geometric Dimensions Types // Matec Web of Conferences. 2018. V. 145. 05002. DOI: https://doi.org/10.1051/matecconf/201814505002.
    WoS  Scopus 

  62. Gorkunov E.S. Zadvorkin S.M. Povolotskaya A.M. Igor Veselov Studying the effect of elastic-plastic strain and hydrogen sulphide on the magnetic behaviour of pipe steels as applied to their testing // Matec Web of Conferences. 2018. V. 145. 05003. DOI: https://doi.org/10.1051/matecconf/201814505003.
    WoS  Scopus 

  63. Ogorelkov D. A. Mironov V.I. Lukashuk O. Durability of Metal Structures under Quasi-Static Load // MATEC Web of Conferences // MATEC Web of Conferences. 2018. V. 224. 02091. doi.org/10.1051/matecconf/201822402091.
    WoS  Scopus 

  64. Putilova E. A. Gorkunov E.S. Zadvorkin S.M. Investigation of the Structure, Phase Composition and Physical-Mechanical Characteristics of High-Strength Laminated Materials Which Contain Corrosion-Resistant Steels with High Nitrogen Content // Matec Web of Conferences. 2018. V. 145. 05004. https://doi.org/10.1051/matecconf/201814505004.
    WoS  Scopus 

  65. Savrai R.A. Makarov A.V. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part II: mechanical properties // Materials Science & Engineering: A. 2018. 734. P. 513-518. https://doi.org/10.1016/j.msea.2018.07.100.
    WoS  Scopus 

  66. Savrai R.A. Makarov A.V. Malyigina I.Yu. Volkova E.G. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part I: microstructure and surface properties // Materials Science & Engineering: A. 2018. 734. P. 506-512. https://doi.org/10.1016/j.msea.2018.07.099.
    WoS  Scopus 

  67. Kaigorodova L.I. Rasposienko D.Yu. Pushin V.G. Pilyugin V.P. Smirnov S.V. Influence of Severe Plastic Deformation on the Structure and Properties of Al-Li-Mg-Zr-Sc-Zn Alloy // Physics of Metals and Metallography. 2018. Vol. 119. – No. 2. – P. 161-168. – DOI: 10.1134/S0031918X18020060.
    WoS  Scopus 

  68. Tabatchikova T.I. Lepikhin S.V. Morozov A.N. Gudnev N.Z. Structure and Mechanical Properties of Steel Welding Joints Produced Using Abrasive Waterjet Cutting // Physics of Metals and Metallography. 2018. Vol. 119. – No. 7. P. 691-699.
    WoS  Scopus 

  69. Prosviryakov E.Yu. Spevak L.F.  Layered Three-Dimensional NonUniform Viscous Incompressible Flows // Theoretical Foundations of Chemical Engineering. 2018. Vol. 52. No. 5. P. 765-770. DOI: 10.1134/S0040579518050391.
    WoS  Scopus 

  70. Vandyshev A.B. Kulikov V.A. Analysis of the Calculated parameters of a Model Membrane-Catalytic Converter for the Production of High-Purity Hydrogen from Methane. // Chemical and Petroleum Engineering. 2018. Vol. 54. No. 1-2. P. 31-37. DOI: 10.1007/s10556-018-0434-y.
    WoS  Scopus 

  71. Vandyshev A.B. Kulikov V.A. Modeling a Membrane Reformer with a Carbon-Monoxide Conversion Catalyst for Extracting High-Purity Hydrogen from Methane Steam-Conversion Products // Chemical and Petroleum Engineering. 2018. Vol. 54. Nos. 5-6. P. 313-321. DOI: 10.1007/s10556-018-0481-4.
    WoS  Scopus 

  72. Berdnikov K.V. Struzhanov V.V. Equilibrium State of a Softening Elastoplastic Medium with an Expanding Spherical Cavity // Journal of Applied Mechanics and Technical Physics. 2018. Vol. 59. Iss. 1. P. 104-111. DOI: 10.1134/S0021894418010133.
    WoS  Scopus 

  73. Grokhovsky V.I. Gladkovsky S.V. The impact mechanical tests of seymchan and chinga meteorites // Meteoritics & Planetary Science. 2018. Vol. 53. P. 6276-6276.
    WoS  Scopus 

  74. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Igumnov A.S. A Numerical Study of Plastic Strain Localization and Fracture in Al/SiC Metal Matrix Composite // Physical Mesomechanics. 2018. Vol. 21. – Iss. 4. – P. 305-313. – DOI: 10.1134/S1029959918040045.
    WoS  Scopus 

  75. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Distribution of Magnetic Flux in a Ferromagnetic Material in the Presence of a Nonferromagnetic Gap in the Composite Circuit // Russian Journal of Nondestructive Testing. 2018. Vol. 54. No. 12. P. 861-870. DOI: 10.1134/S1061830918120069.
    WoS  Scopus 

  76. Shabashov V.A. Gavrilov N.V. Kozlov K.A. Makarov A.V. Titova S.G. Voronin V.I. Structure of the surface layers of metastable austenitic stainless steel nitrided in electron beam plasma // The Physics of Metals and Metallography. 2018. V. 119. – No. 8. – P. 755-763. – DOI: 10.1134/S0031918X18080124.
    WoS  Scopus 

  77. Shabashov V.A. Makarov A.V. Kozlov K.A. Sagaradze V.V. Zamatovskii A.E. Volkova E.G. Luchko S.N. Deformation-Induced Dissolution and Precipitation of Nitrides in Austenite and Ferrite of a High-Nitrogen Stainless Steel // The Physics of Metals and Metallography. 2018. V. 119. – No. 2. – P. 196-206. – DOI: 10.1134/S0031918X18020096.
    WoS  Scopus 

  78. Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of Heating on the Structure, Phase Composition and Micromechanical Properties of the Metastable Austenitic Steel Strengthened by Nanostructuring Frictional Treatment // The Physics of Metals and Metallography. 2018. V. 119. – Is. 12. – P. 1196-1203.
    WoS  Scopus 

  79. Savrai R.A. Resistance of laser-clad chromium–nickel coatings to failure under contact fatigue loading // The Physics of Metals and Metallography. 2018. V. 119. – Is. 10. – P. 1013-1021. – DOI: 10.1134/S001532301810011X.
    WoS  Scopus 

  80. Privalova V.V. Prosviryakov E.Yu. Couette–Hiemenz exact solutions for the steady creeping convective flow of a viscous incompressible fluid, with allowance made for heat recovery // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 3. P. 532-548. DOI: 10.14498/vsgtu1638.
    WoS  VAC list 

  81. Prosviryakov E.Yu. Dynamic equilibria of a nonisothermal fluid // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 4. DOI: 10.14498/vsgtu1651.
    WoS  VAC list 

  82. Skorynina P.A. Makarov A.V. Volkova  E.G. Osinceva A.L. Increasing the Micromechanical and Tribological Characteristics of an Austenitic Steel by Surface Deformation Processing. 2018. Vol. 2053. 030064. https://doi.org/10.1063/1.5084425.
    WoS 

  83. Loginov Yu.N. Babaylov N.A. Polyansky L.I. Pervukhina D.N. Briquette Compacting in Container with a Small Taper Angle // AIP Conference Proceedings. 2018. Vol. 2053. – 040053. – https://doi.org/10.1063/1.5084491.
    WoS 

  84. Lezhnin N.V. Makarov A.V. Gavrilov  N.V. Osinceva A.L. Savrai R.A. Improving the Scratch Test Properties of Plasma-Nitrided Stainless Austenitic Steel by Preliminary Nanostructuring Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 040050. – https://doi.org/10.1063/1.5084488.
    WoS 

  85. Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Analysis of the Stress-Strain State of a Tool during Hydromechanical Extrusion // AIP Conference Proceedings. 2018. Vol. 2053. 040001. https://doi.org/10.1063/1.5084439.
    WoS 

  86. Burmasheva N.V. Prosviryakov E.Yu. Investigation of a Velocity Field for the Marangoni Shear Convection of a Vertically Swirling Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. – 040011. – https://doi.org/10.1063/1.5084449.
    WoS 

  87. Burmasheva N.V. Prosviryakov E.Yu. Investigation of Temperature and Pressure Fields for the Marangoni Shear Convection of a Vertically Swirling Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. – 040012. – https://doi.org/10.1063/1.5084450.
    WoS 

  88. Emelyanov I.G. Mironov V.I. A Method for Estimating the Hydrogenation of a Shell with Variable Geometrical and Physical-Mechanical Parameters // AIP Conference Proceedings. 2018. Vol. 2053. 030012. https://doi.org/10.1063/1.5084373.
    WoS 

  89. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Durability of a Locomotive Cab at a Railway Crossing Calculated with the Estimation of the Obstacle Parameters // AIP Conference Proceedings. 2018. Vol. 2053. – 040018. – https://doi.org/10.1063/1.5084456.
    WoS 

  90. Gladkovsky S.V. Kamantsev I.S. Petrova (Kuteneva) S.V. Dvoynikov D.A. Kuznetsov A.V. Layered Metal Composites with High Resistance to Brittle Fracture at Low Temperatures // AIP Conference Proceedings. 2018. Vol. 2053. 020003. https://doi.org/10.1063/1.5084349.
    WoS 

  91. Gladkovsky S.V. Petrova (Kuteneva) S.V. Dvoynikov D.A. Veselova V.E. Parametrization of Powder for Al/B4C Metal Matrix Composites Using the Static Image Analysis Method // AIP Conference Proceedings. 2018. Vol. 2053. – 040026. – https://doi.org/10.1063/1.5084464.
    WoS 

  92. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Magnetic Flux Distribution in a Ferromagnetic Material with the Variation of the Magnetizer Dimensions and the Nonferromagnetic Gap Value // AIP Conference Proceedings. 2018. Vol. 2053. 020004. https://doi.org/10.1063/1.5084350.
    WoS 

  93. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Correlation of Residual Stresses with Magnetic Properties of Armco Iron // AIP Conference Proceedings. 2018. Vol. 2053. – 030022. – https://doi.org/10.1063/1.5084383.
    WoS 

  94. Gorshkov A.V. Prosviryakov E.Yu. Isobaric Vortex Flow of a Viscous Incompressible Fluid with the Navier Boundary Condition // AIP Conference Proceedings. 2018. Vol. 2053. – 040030. – https://doi.org/10.1063/1.5084468.
    WoS 

  95. Gorshkov A.V. Prosviryakov E.Yu. Large-Scale Convection Flow of an Incompressible Fluid on a Rotating Inclined Plane // AIP Conference Proceedings. 2018. Vol. 2053. – 040029. – https://doi.org/10.1063/1.5084467.
    WoS 

  96. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Checking of Subjective Decisions Obtained by Computer-Aided Design of Forgings // AIP Conference Proceedings. 2018. Vol. 2053. – 040040. – https://doi.org/10.1063/1.5084478.
    WoS 

  97. Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Ontology of the Input Language for Computer-Aided Design of Shaft Forging on Presses // AIP Conference Proceedings. 2018. Vol. 2053. – 040039. – https://doi.org/10.1063/1.5084477.
    WoS 

  98. Kazakov A.L. Kuznetsov P.A. Spevak L.F. A Heat Wave Problem for a Degenerate Nonlinear Parabolic Equation with a Specified Source Function // AIP Conference Proceedings. 2018. Vol. 2053. – 030024. – https://doi.org/10.1063/1.5084385.
    WoS 

  99. Khalevitskiy Yu.V. Konovalov A.V. Partin A.S. On Convergence of Various Iterative Linear Solvers in Heterophase Elastoplastic Media Deformation Models // AIP Conference Proceedings. 2018. Vol. 2053. 030026. https://doi.org/10.1063/1.5084387.
    WoS 

  100. Khudorozhkova Yu.V. Cheremicina E.R. The Effect of a Dispersed Grain Structure of Hypoeutectoid, Eutectoid and Hypereutectoid Carbon Steels on Their Magnetic Behavior // AIP Conference Proceedings. 2018. Vol. 2053. 040042. https://doi.org/10.1063/1.5084480.
    WoS 

<< Васк | | Forward >>