<< Васк |
  1. Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. E.V. Derevyankin EBSD Analysis of the Structural State of the Cu-Zn-Mn-Al-Fe-Ni Alloy after Hot Deformation // AIP Conf. Proc. 2017. Vol. 1915. – 030020.
    Full text>>

  2. Savrai R.A. Kuznetsov A.V. Evaluation of Contact Stresses in the Surface of an Elastic-Plastic Plate Penetrated by a Flat-Ended Rigid Cylindrical Punch // AIP Conf. Proc. 2017. Vol. 1915. – 040050.
    Full text>>

  3. Savrai R.A. Makarov A.V. Gorkunov E.S. Soboleva N.N. L.Kh. Kogan Malyigina I.Yu. Osinceva A.L. Davydova (Pozdejeva) N.A. Eddy-Current Testing of the Fatigue Degradation of a Gas Powder Laser Clad NiCrBSi–Cr3C2 Composite Coating under Contact Fatigue Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040049.
    Full text>>

  4. Smirnov A.S. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Effect of Fillers in Epoxy Coatings Based on the ED-20 Resin on the Mechanical Properties Determined by Instrumented Microindentation // AIP Conf. Proc. 2017. Vol. 1915. – 020008.
    Full text>>

  5. Solovei V.D. Kolmogorov V.L. A Method for Calculating the Plastic Anisotropy Constants of the Hill Theory // AIP Conf. Proc. 2017. Vol. 1915. – 040053.
    Full text>>

  6. Spevak L.F. Kazakov A.L. Solving a Degenerate Nonlinear Parabolic Equation with a Specified Source Function by the Boundary Element Method // AIP Conf. Proc. 2017. Vol. 1915. – 040054.
    Full text>>

  7. Spevak L.F. Nefedova O.A. Solving a Two-Dimensional Nonlinear Heat Conduction Equation with Nonzero Boundary Conditions by the Boundary Element Method // AIP Conf. Proc. 2017. Vol. 1915. – 040055.
    Full text>>

  8. Struzhanov V.V. Korkin A.V. Destruction of Nanochains under Stressing // AIP Conf. Proc. 2017. Vol. 1915. – 030028.
    Full text>>

  9. Volkov S.S. Struzhanov V.V. Fatigue Durability under Random Cyclic Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040062.
    Full text>>

  10. Zalazinskaya E.A. Zalazinskiy A.G. A Model of High-Rate Indentation of a Cylindrical Striking Pin into a Deformable Body // AIP Conf. Proc. 2017. Vol. 1915. – 040067.
    Full text>>

  11. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Choosing the Optimal Pareto Composition of the Charge Material for the Manufacture of Composite // AIP Conf. Proc. 2017. Vol. 1915. – 040068.
    Full text>>

  12. Zamaraev L.M. Smirnov S.V. High-Temperature Short-Term Creep of the 2 and Ti-5Al Titanium Alloys under Heating in Air and Helium // AIP Conf. Proc. 2017. Vol. 1915. – 040069.
    Full text>>

  13. A.P. Karamyshev I.I. Nekrasov Nesterenko A.V. Parshin S.V. Smirnov S.V. Shveikin V.P. A.A. Fedulov Studying Damage Accumulation in Martensitic Corrosion-Resistant Steel under Cold Radial Reduction // AIP Conf. Proc. – 2017. Vol. 1915. – 030007.
    Full text>>

  14. Kruchkov D.I. Zalazinskiy A.G. A Hybrid Modeling System Designed to Support Decision Making in the Optimization of Extrusion of Inhomogeneous Materials // AIP Conf. Proc. – 2017. Vol. 1915. – 040028.
    Full text>>

  15. Kuznetsov A.V. Kamantsev I.S. Zadvorkin S.M. N.A. Drukarenko Goruleva L.S. Veselova V.E. Evaluating the Damage of Steel 09G2S under Static and Cyclic Loading with Regard for the Level of Residual Stresses in the Metal // AIP Conf. Proc. – 2017. Vol. 1915. – 040030.
    Full text>>

  16. Ogorelkov D. A. Kamantsev I.S. Vladimirov A.P. Khudorozhkova Yu.V. Numerical and Experimental Approaches to the Evaluation of the Fatigue Life of a Cylindrical Specimen made of the 09G2S Steel // AIP Conf. Proc. – 2017. Vol. 1915. – 040010.
    Full text>>

  17. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Smirnov A.S. Effect of Hot Plastic Deformation on the Structural State of a Al-10%SiC Composite // AIP Conf. Proc. – 2017. Vol. 1915. – 030022.
    Full text>>

  18. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov Modeling the Stress-Strain State of the V95/SiC Aluminum Alloy Matrix Composite under Uniaxial Loading // AIP Conf. Proc. – 2017. Vol. 1915. – 030026.
    Full text>>

  19. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Methods for Predicting Dynamic Loading of Friction Disks // AIP Conf. Proc. – 2017. Vol. 1915. – 040060.
    Full text>>

  20. Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098.
    Full text>>

  21. Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098.
    Full text>>

  22. Michurov N.S. Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. The Structural State and Geometric Representation of a Laser-Welded Joint between a Corrosion-Resistant Steel and a Titanium Alloy with a Copper Insert . –https://doi.org/10.1063/1.5013818 // AIP Conference Proceedings. 2017. Vol. 1909. – 020137.

  23. Ogorelkov D. A. Kamantsev I.S. Kuznetsov A.V. Vladimirov A.P. Khudorozhkova Yu.V. Numerical and Experimental Approaches to the Evaluation of the Fatigue Life of a Cylindrical Specimen made of the 09G2S Steel // AIP Conference Proceedings. 2017. 1915. – 040010. 5 p.

  24. Pugacheva (Vandysheva) N.B. A.N. Cherepanov A.M. Orishich A.G. Malikov I.O. Drozdov V.I. Mali Senaeva (Pugacheva) E.I. Investigation of the Structure and Properties of a Composite Insert Applied at Laser Welding of Steel with Titanium // AIP Conference Proceedings. 2017. Vol. 1893. – 030107.
    Text in >>

  25. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Bykova (Gurchenko) T.M. Pugacheva E.I. Aluminium Matrix Composites with a SiC Filler . – https://doi.org/10.1063/1.5013861 // AIP Conference Proceedings. 2017. Vol. 1909. – 020180.

  26. Senaeva (Pugacheva) E.I. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Diagnostic of the Change in the Phase Composition and Stress-Strain State of the Laminated Materials and Their Components by Measuring the Magnetic Characteristics // AIP Conference Proceedings. 2017. Vol. 1909. – 020181.
    Full text>>

  27. Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Theoretical and Experimental Investigation of Hydromechanical Extrusion Process . – DOI: 10.11648/j.ajmie.20170201.13 // American Journal of Mechanical and Industrial Engineering. 2017. Vol. 2. – No. 1. P. 17-23.

  28. Trishin V.N. Lookin N.A. Alexander Filimonoff Software Development Technology for Homogeneous Computing Environments // CEUR Workshop Proceedings (CEUR-WS.org). 2017. Vol. 1990. P. 60-71.

  29. Vandyshev A.B. Kulikov V.A. Analysis of Parameters and Modes for Producing High-Purity Hydrogen from Natural Gas in Membrane-Catalytic Devices // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 1-2. P. 49-55.

  30. Vandyshev A.B. Kulikov V.A. Energy and Resource Efficience in Industrial Systems for Production and Use of High-Purity Hydrogen // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 3-4. P. 166-170.

  31. M.A. Filippov M.A. Gervasiev S.M. Nikiforova Khudorozhkova Yu.V. G.N. Plotnikov S.Kh. Estemirova V.V. Controlling the Structure of Wear-Resistant Steels 150khnml and Kh12mfl by High-Temperature Quenching and Cold Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.1.043-054 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 43-54.

  32. Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions for Natural Convection of Layered Flows of a Viscous Incompressible Fluid with Specified Tangential Forces and the Linear Distribution of Temperature on the Layer Boundaries [Electronic resource] // . – URL: http://dream-journal.org/issues/2017-4/2017-4_145.html // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 16-31.

  33. Gladkovsky S.V. Petrova (Kuteneva) S.V. Kamantsev I.S. R.M. Galeev S.N. Sergeev Dvoynikov D.A. Formation of the Mechanical Properties and Fracture Resistance Characteristics of Sandwich Composites Based on the 09G2S Steel and the EP678 High-Strength Steel of Various Dispersion [Electronic resource] – DOI: 10.17804/2410-9908.2017.6.071-09 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 71-90.

  34. Gorkunov E.S. Magnetic Evaluation of the Structural and Phase Changes in Individual Layers of Multilayer Products [Electronic resource] . – DOI: 10.17804/2410-9908.2017.2.006-027 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 2. P. 6-27.

  35. Kazakov A.L. Spevak L.F. Nefedova O.A. Simultenious Application of the Boundary Element Method and the Power Series Method for Solving a Two-Dimensional Problem of Heat Wave Motion [Electronic resource] . – DOI: 10.17804/2410-9908.2017.6.006-015 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 6-15.

  36. Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. Trushina E.B. A.V. Gerasimova Agapitova O.Yu. Antenorova. Reasons for Cracking of Die-Forged Cuzn34mn3al2feni Brass Blanks [Electronic resource] . – DOI: 10.17804/2410-9908.2017.4.061-080 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 61-80.

  37. Savrai R.A. Makarov A.V. Malyigina I.Yu. Rogovaya S.A. Osinceva A.L. Improving the Strength of the AISI 321 Austenitic Stainless Steel by the Frictional Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.5.043-062. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 5. P. 43-62.

  38. Shubina A.N. Babaylov N.A. Modeling of Radial Forging of a Hollow Ingot in Multiple Die Units [Electronic resource] . – URL: http://dream-journal.org/issues/2017-4/2017-4_147.html // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 6-15.

  39. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov A Computational Model of V95/SiCp (7075/ SiCp) Aluminum Matrix Composite Applied to Stress-Strain State Simulation under Tensile, Compressive and Shear Loading Conditions [Electronic resource] . – DOI: 10.17804/2410-9908.2017.6.016-027 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 16-27.

  40. Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Estimating the Effect of Fillers on the Mechanical Properties of Epoxy Glue Coatings by Microindentation [Electronic resource] – DOI: 10.17804/2410-9908.2017.6.103-111 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 103-111.

  41. Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. V.М. Fomin A.А. Filippov Т.А. Brusentseva Studying Epoxy Resin Reinforced with Silica Dioxide Nanoparticles by Microindentation [Electronic resource] // . – DOI: 10.17804/2410-9908.2017.1.024-035 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 24-35.

  42. Volkov S.S. Struzhanov V.V. Modeling of a Complete Deformation Diagram for Materials with Properties of Auxetics [Electronic resource] . – DOI: 10.17804/2410-9908.2017.2.040-052 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 2. P. 40-52.

  43. S.V. Anakhov Pugacheva (Vandysheva) N.B. Yu.A. Pykin A.V. Matushkin Bykova (Gurchenko) T.M. Qualitative Study of Steel Cutting with the Use of the Narrow Jet Plasma Technology // Inorganic Materials: Applied Research. 2017. Vol. 8. – No. 3. P. 400-405.

  44. Koroleva (Chekhomova) L.F. Dobrinskaya M.N. Kamantsev I.S. Doped calcium carbonate-phosphate used for bone tissue technology // Integrative Clinical Medicine. – DOI: 10.15761/ICM.1000108. 2017. Vol. 1(2). P. 1-7.

  45. Yu.N. Loginov Babaylov N.A. D.N. Pervukhina The Action Result of the Concentrated Load on the Briquettes which Obtained from the Technogenous Material . – DOI 10.18502/kms.v2i2.953 // International Conference with Elements of School for Young Scientists on Recycling and Utilization of Technogenic Formations, KnE Materials Science. 2017. P. 97-101.

  46. Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Smirnov A.S. Pugacheva (Vandysheva) N.B. Konovalov A.V. A fracture locus for a 50 volume-percent Al/SiC metal matrix composite at high temperature // International Journal of Material Forming. 2017. Vol. 10. – Iss. 5. P. 831–843.
    Full text>>

  47. Mushnikov A.N. Senaeva (Pugacheva) E.I. Mathematical Model of Magnetic Hysteresis under Triaxial Stress State // International Scientific Conference Proceedings “MATHMODEL”. 2017. Year 1. – Iss. 1. P. 55-58.

  48. Burmasheva N.V. Prosviryakov E.Yu. Exact solutions for layered large-scale convection induced by tangential stresses specified on the free boundary of a fluid layer – doi:10.1088/1757-899X/208/1/012010. // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012010.
    Full text>>

  49. Prosviryakov E.Yu. Spevak L.F. Exact Solutions for Stationary and Unsteady Layered Convection of a Viscous Incompressible Fluid with the Specified Velocities at the Bottom . – doi:10.1088/1757-899X/208/1/012035. // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012035.
    Full text>>

  50. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Hierarchical modeling of deformation and damage of metal matrix composite under uniaxial loading conditions . – doi:10.1088/1757-899X/208/1/012037 // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012037.
    Full text>>

  51. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Role of the Strengthening Phases in Abrasive Wear Resistance of Laser-Clad NiCrBSi Coatings // Journal of Friction and Wear. 2017. Vol. 38. – No. 4. P. 272-278.

  52. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Determination of Safe Operating Conditions for Supporting Structures under Abnormal Loads // Journal of Machinery Manufacture and Reliability. 2017. Vol. 46. – No. 2. P. 142-148.

  53. Mironov V.I. Ivanovich and Lukashuk Olga Anatolievna. Influence of Material Structural Inhomogeneity on Fracture Strength of Constructional Elements // Key Engineering Materials. 2017. Vol. 735. P. 89-94.

  54. Mironov V.I. Lukashuk O. Ogorelkov D. Fracture Strength for Metal Structure of a Crane . – DOI; 10.1051/matecconf/201712906008 // Matec Web of Conferences. 2017. Vol. 129. – 06008.

  55. Mironov V.I. Lukashuk O. Ogrelkov D. Method of Increasing Durability of Thin-Walled Structural Elements . – DOI; 10.1051/matecconf/201712901024 // Matec Web of Conferences. 2017. Vol. 129– 01034.

  56. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Improving the Quality of Transient Response During Automatic Control of the Turn of a Tracked Vehicle Based on the Implementation of Structured Input Shapers ). – DOI: 10.1051/matecconf/2017129, 06029 ICMTMTE 2017 // Matec Web of Conferences. 2017.

  57. S.D. Neulybin Yu.D. Shchitsyn V.S. Verkhorubov Yu.S. Korobov M.A. Filippov Savrai R.A. Soboleva N.N. Metallurgical Processes During Plasma Remelting of a Metallized Coating of the Fe-C-Cr-Ti-Al System // Metallurgist. 2017. Vol. 60. – Nos. 11–12. P. 1202-1206.

  58. Makarov A.V. N.V. Gavrilov G.V. Samoylova A.S. Mamaev Osinceva A.L. Savrai R.A. Effect of a Continuous and Gas-Cyclic Plasma Nitriding on the Quality of Nanostructured Austenitic Stainless Steel // Obrabotka Metallov – Metal Working and Material Science. 2017. Вып. 2. P. 55-66.

  59. E.V. Shalaeva N.I. Medvedeva A.E. Precul Smirnova (Yekzemplyarova) E.O. Smirnov S.V. N.I. Shchegolikhina I.O. Selyanin Ordering Effect on the Mechanical, Electronic and Magnetic Properties of the –Based Non-Canonical Approximant Phase: -Al50Cu33Fe17’-Al50Cu44Fe6 and -Al47.5Cu49.5Fe3 // Philosophical Magazine. 2017. Vol. 97. – No. 13. P. 1024-1046.

  60. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Makarov A.V. N.L. Pecherkina Structure and Mechanical Properties of a High-Carbon Steel Subjected to Severe Deformation // Physics of Metals and Metallography. 2017. Vol. 118. – No. 10. P. 1006-1014.

  61. Makarov A.V. Luchko S.N. Shabashov V.A. Volkova E.G. Zamatovskii A.E. Osinceva A.L. Litvinov A.V. Sagaradze V.V. Structural and phase transformations and micromechanical properties of the high-nitrogen austenitic steel deformed by shear under pressure // Physics of Metals and Metallography. 2017. Vol. 118. – No. 1. P. 52-64.

  62. Makarov A.V. Skorynina P.A. A.S. Yurovskikh Osinceva A.L. Effect of the Conditions of the Nanostructuring Frictional Treatment Process on the Structural and Phase States and the Strengthening of Metastable Austenite Steel // Physics of Metals and Metallography. 2017. Vol. 118. – No. 12. P. 1225-1235.

  63. Berezin I.M. A.A. Petunin Kruchkov D.I. G.L. Kovacs Finite-Element Simulation of the Cold Stamping Process of Spherical Vessels // Pollack Periоdica. An International Journal for Engineering and Information Sciences.. 2017. Vol. 12. – No. 1. P. 81-92.

  64. Blagonravov A.A. A.A. Yurkevich Yurkevich A.V. Automatic control of a stepless mechanical transmission with an internal force function // Russian Engineering Research. 2017. Vol. 37. – No. 3. P. 185-188.

  65. Mikhailova Y.A. Vladimirov A.P. Bakharev A.A. Sergeev A.G. Novosyolova I.A. Yakin D.I. Studying of cell culture reaction to temperature change by dynamic speckle interferometry // Russian Journal of Biomechanics. 2017. Vol. 21. – No. 1. P. 64-73.

  66. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Vehicle Survivability Calculation // Russian Journal of Construction Science and Technology. 2017. Vol. 3. – No. 1. P. 40-44.

  67. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Identification of the Modified Drucker-Prager Yield Condition and Modeling of Compaction of the Plasticized Titanium Feedstock // Russian Journal of Non-Ferrous Metals. 2017. Vol. 58. – No. 2. P. 297-302.

  68. Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Comparative Analysis of the Magnetic Characteristics of Plastically Deformed Metal in Different Zones of a Welded Pipe under Elastic Deformation // Russian Journal of Nondestructive Testing. 2017. Vol. 53. – No. 9. P. 636-643.

  69. Gorkunov E.S. Zadorin A.Yu. Goruleva L.S. Relationship between the Structure and Physical-Mechanical Properties of U8A Steel Subjected to Cold Plastic Deformation by Hydrostatic Extrusion // Russian Journal of Nondestructive Testing. 2017. Vol. 53. – No. 10. P. 700-706.

  70. L.A. Elshina R.V. Muradymov A.G. Kvashnichev Vichuzhanin D.I. N.G. Molchanova A.A. Pankratov Synthesis of New Metal-Matrix Al-Al2O3-Graphene Composite Materials // Russian Metallurgy (Metally). 2017. No. 8. P. 631-641.

  71. Yu.N. Saraev V.P. Bezborodov Gladkovsky S.V. N.I. Golikov Properties of the Welded Joints of Manganese Steel Made by Low-Frequency Pulsed Arc Welding // Russian Metallurgy (Metally). 2017. No. 4. P. 287-292.

  72. Butorin D.E. Burov V.G. Burov S.V. Tolochko B.I. Bataev I.A. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. V. 60. – Is. 5. P. 817-820.

  73. D.E. Butorin V.G. Burov Burov S.V. B.P. Tolochko I.A. Bataev. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. Vol. 60. – Iss. 5. P. 817-820.

  74. Mironov V.I. O. Lukashuk Vichuzhanin D.I. Method for Describing Fatigue Processes in Structural Materials // Solid State Phenomena. 2017. Vol. 265. P. 815-820.

  75. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Volkov A.A. Forecasting Resonant Parametric Vibrations of Transmission Friction Discs on the Basis of the Exact Determination of Their Modal Characteristics // Trans & Motauto. 2017. Year I. – Vol. 1. P. 7-10.

  76. Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Volkov A.A. Reducing the Dynamic Load of Mechanical Water-Jet Drive of Amphibious Machines // Trans & Motauto. 2017. Year I. – Vol. 1. P. 4-6.

  77. Burmasheva N.V. Prosviryakov E.Yu. A large-scale layered stationary convection of an incompressible viscous fluid under the action of shear stresses at the upper boundary. Velocity field investigation // Vestnik Samarskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Fiziko-matematicheskie nauki. 2017. Vol. 21. – No. 1. P. 180-196.

  78. Struzhanov V.V. On the method of orthogonal projections in the theory of elasticity // Vestnik Samarskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Fiziko-matematicheskie nauki. 2017. Vol. 21. – No. 2. P. 308-325.

  79. Y.N. Saraev V.P. Bezborodov Gladkovsky S.V. N.I. Golikov Improving the reliability of metallic structures in service in the conditions with low climatic temperatures by efficient application of advanced methods of modification of the zone of the welded joint // Welding International. 2017. Vol. 31. – No. 8. P. 631-636.

  80. S.V. Anakhov Gladkovsky S.V. S.V. Lepikhin Dvoynikov D.A. Y.A. Pykin A.V. Matushkin. Mechanical and technological properties of welded joints produced after plasma cutting // Welding International. 2017. Vol. 31. – No. 6. P. 445-451.

<< Васк |