Rekov A.M. Vichuzhanin D.I. The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 53-60. DOI: 10.15593/perm.mech/2018.3.06.
Emelyanov I.G. Mironov V.I. A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 27-35. DOI: 10.15593/perm.mech/2018.3.03.
Konovalov A.V. Kozlov A.V. Konovalov D.A. Partin A.S. Features of Stress-Strain State of Thin-Walled Circular Single-Edge-Notch Specimen under Eccentric Tension // PNRPU Mechanics Bulletin. 2018. No. 3. P. 44-52. DOI: 10.15593/perm.mech/2018.3.05.
Smirnov S.V. Kruchkov D.I. Nesterenko A.V. Berezin I.M. Vichuzhanin D.I. Experimental study of short-term transient creep of the Al/SiC metal-matrix composite under uniaxial compression // PNRPU Mechanics Bulletin. 2018. No. 4. DOI: 10.15593/perm.mech/2018.4.09.
Struzhanov V.V. Vichuzhanin D.I. A Method for Converting an Experimental Torsion Diagram for a Cylindrical Specimen to the Stress-Strain Diagram of the Material // PNRPU Mechanics Bulletin. 2018. No. 2. P. 107-113. DOI: 10.15593/perm.mech/2018.2.10.
Vichuzhanin D.I. Yolshina L.A. Smirnov A.S. Muradymov R.V. A Fracture Locus for a 2 Wt % Aluminum-Graphene Metal Matrix Composite at 300° C // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 17-26. DOI: 10.15593/perm.mech/2018.3.02.
Vladimirov A.P. Ponosov Yu.S. Application of speckle dynamics and Raman light scattering to study the fracture features of pipe steel at high-cycle fatigue // PNRPU Mechanics Bulletin. 2018. No. 3. P. 138-146. DOI: 10.15593/perm.mech/2018.3.13.
Privalova V.V. Prosviryakov E.Yu. Steady convective Coutte flow for quadratic heating of the lower boundary fluid layer // Rus. J. Nonlin. Dyn. 2018. Vol. 14. No. 1. P. 69-79.
Gladkovsky S.V. Potapov A.I. Salikhyanov D.R. Rheological Properties and Substantiation of Hot Rolling Regimes of Low- and Medium Carbon Structural Steels // Solid State Phenomena. 2018. Vol. 284. P. 653-661. DOI:10.4028/www.scientific.net/SSP.284.653.
Shveikin V.P. Thermomechanical Hardening of Steels // Solid State Phenomena. 2018. Vol. 284. P. 507-512. https://doi.org/10.4028/www.scientific.net/SSP.284.507.
Brusentseva T.A. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Stydying the Influence of the Nature of the Filler on the Mechanical Properties of the Der-330 Epoxy Resin [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 27-36. DOI: 10.17804/2410-9908.2018.6.027-036.
Druzhinin A.V. Vladimirov A.P. Tsvetkova E.V. Teoretical Bases of Magnetooptical Refractometry for Transparent Media [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 83-89. DOI: 10.17804/2410-9908.2018.6.083-089.
Emelyanov I.G. Mechanics of Shells and Its Applications [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 6-28. DOI: 10.17804/2410-9908.2018.2.006-028.
Kazakov A.L. Spevak L.F. Nefedova O.A. On the Numerical-Analytical Approaches to Solving a Nonlinear Heat Conduction Equation with a Singularity [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 100-116. DOI: 10.17804/2410-9908.2018.6.100-116.
Muizemnek O.Yu. Konovalov A.V. Kanyukov S.I. Computer-Aided Intersubjective Assignment of Overlaps for Shaft-Type Forgings [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 14-23. DOI: 10.17804/2410-9908.2018.3.014-023.
Nefedova O.A. Vykhodets V.B. A Procedure for Online Investigation of Deuterium Diffusion in Materials [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 57-63. DOI: 10.17804/2410-9908.2018.5.057-063.
Nefedova O.A. Vykhodets V.B. Kurennykh T.E. A Procedure for Studying the Effect of Radiation Defects on the Diffusion Coefficients of Deuterium in Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 64-73. DOI: 10.17804/2410-9908.2018.5.064-073.
Polyakov A.P. Dynamic Powder Compaction Processes [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 42-82. DOI: 10.17804/2410-9908.2018.2.042-082.
Privalova V.V. Prosviryakov E.Yu. Exact Solutions for a Couette–Hiemenz Creeping Convective Flow with Linear Temperature Distribution on the Upper Boundary [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 92-109. DOI: 10.17804/2410-9908.2018.2.092-109.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Mushnikov A.N. Studying the Effect of Plastic Deformation on the Mechanical and Magnetic Characteristics of High-Strength Bimetal Materials Intended for Use in the Arctic Climate [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. ss. 6. P. 136-14. DOI: 10.17804/2410-9908.2018.6.136-148.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
Smirnov S.V. Khotinov V.A. Vichuzhanin D.I. Polukhina O.N. Farber V.M. The Digital Image Correlation Method Applied to Studyingthe Plastic Flowof the 08g2bmsteel under Tension [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 6-13. DOI: 10.17804/2410-9908.2018.3.006-013.
Smirnov S.V. Konovalov D.A. Kalashnikov S.T. Smirnova (Yekzemplyarova) E.O. Studying the Adhesion Strength and Mechanical Properties of Coatings on Aluminum-Magnesium Alloy Samples [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 106-115. DOI: 10.17804/2410-9908.2018.5.106-115.
Solovei V.D. A Variational Principle for the Disturbances of Particle Velocities in the Flow of a Perfectly Plastic Strip under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 83-91. DOI: 10.17804/2410-9908.2018.2.083-091.
Zadvorkin S.M. Shveikin V.P. Kalashnikov S.T. Antenorova N.P. On the Applicability of Electromagnetic Testing Methods to Detecting Discontinuities in Steel Structures Intended for Operation in Aggressive Media Under Extreme Loads // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 8-17. DOI: 10.17804/2410-9908.2018.6.008-017.
Zalazinskiy A.G. Kruchkov D.I. Titov V.G. Application of the Pareto Criterion to Selecting the Optimal Composition of the Charge Material for the Manufacture of a Composite Blank [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 33-42. DOI: 10.17804/2410-9908.2018.3.033-042.
Kazakov A.L. Kuznetsov P.A. Spevak L.F. On a Three-Dimensional Heat Wave Generated by Boundary Condition Specified on a Time-Dependent Manifold // Izvestiya Irkutskogo gosudarstvennogo universiteta. Seriya: Matematika. 2018. Vol. 26. P. 16-33.
Kruchkov D.I. Zalazinskiy A.G. Romanova O.V. Nesterenko A.V. Smirnova (Yekzemplyarova) E.O. Determination of parameters for the plasticity model of VT-22 alloy powder particles // Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional'nye pokrytiya. 2018. No. 2. P. 4-12. DOI: 10.17073/1997-308X-2018-2-4-12.
Rozhkova E.A. Gorshkov A.V. Prosviryakov E.Yu. Layered Marangoni Convection during Heat Transfer According to the Newton’s Law of Cooling. Part 1. Investigation of the Velocity Field // Khimicheskaya fizika i mezoskopiya. 2018. Vol. 20. No. 1. P. 15-27. DOI:10.20537/nd1801007.
Polyakov P.A. Polyakov A.P. Influence of Small Additives on Extrusion of Workpieces from Powder Composites based on Iron // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2018. No. 7. P. 28-34.
Guryanov G.N. Smirnov S.V. Problemy chernoi metallurgii i materialovedeniya Influence of the contact friction on the stressed state and allowable stress of backward pullin the course // Problemy chernoi metallurgii i materialovedeniya. 2018. No. 1. P. 5-14.
Guryanov G.N. Smirnov S.V. Drawing conditions of round solid profile without axial stress increment because of back tension action // Technologiya metallov. 2018. No. 9. P. 3-12. DOI: 10.31044/1684-2499-2018-9-3-12.
Guryanov G.N. Smirnov S.V. Influence of curve shape of strain hardening on drawing stress and safety factor of round solid profile // Technologiya metallov. 2018. No. 2. P. 13-24.
Guryanov G.N. Smirnov S.V. On development of energy-saving conditions of solid round profile drawing // Technologiya metallov. 2018. No. 7. P. 9-20. DOI: 10.31044/1684-2499-2018-7-9-20.
Guryanov G.N. Smirnov S.V. Influence of the intensitivity of simple strength and size of the work confusion of fiber on axial voltage, stability of strength and growth of medium temperature in the drawing line of wire // Uprochnyayushchie tekhnologii i pokrytiya. 2018. Vol. 14. No. 3 (159). P. 99-106.
Churbaev R.V. Fedotov V.P. Cheremicina E.R. High ductility of magnesium at different styrain rates under pressure // Voprosy materialovedeniya. 2018. No. 1. P. 27-34.
Churbaev R.V. Vichuzhanin D.I. A Device for Measuring the Torque upon Loading the Substance by the method of P.W. Bridgman // Zavodskaya laboratoriya. Diagnostika materialov. 2018. Vol. 84. No. 4. P. 66-70. DOI: 10.26896/1028-6861-2018-84-4-66-70.
Mushnikov A.N. Kryucheva K. Modeling of Magnetic Hysteresis under Weak Magnetic Fields and Triaxial Stress State // International Scientific Journal “Mathematical Modeling”. 2018. Year II. – Issue 3. P. 102-104.
Konovalov D.A. Veretennikova (Golubkova) I.A. STUDY ON MECHANICAL PROPERTIES OF A BIMETALLIC COMPOSITE PRODUCED BY EXPLOSION WELDING UNDER INCREMENTAL PLASTIC DEFORMATION Письма о материалах . DOI: 10.22226/2410-3535-2018-2-215-219. 2018. Vol. 8. № 2 (30). P. 215-219.