<< Васк | | Forward >>
  1. Struzhanov V.V. Korkin A.V. Quenching Stresses and Shaft Failure // AIP Conference Proceedings. 2019. Vol. 2176. 040012. – https://doi.org/10.1063/1.5135161.
    WoS 

  2. Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.
    WoS 

  3. Smirnov S.V. Zamaraev L.M. Comparative Study of Shot Creep of Single-Phase Titanium Alloys in Air and Neutral Gas Environment on the Test Temperature in Range from 673 to 1323 K // Frattura ed Integrita Strutturale. 2019. Iss. 49. P. 201-211. DOI: 10.3221/IGF-ESIS.49.21.
    WoS 

  4. Anakhov S.V. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Guzanov B.N. Matushkin A.V. Pykin Yu.A. Substantiation of the Narrow-Jet Plasma Technology for Finishing Cutting of Steel sheets // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012004. – DOI: 10.1088/1757-899X/681/1/012004.
    WoS 

  5. Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. EBSD analysis of the structure of a weld joining a chromium-nickel steel sheet and a titanium alloy sheet through a copper insert // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012034. – DOI: 10.1088/1757-899X/681/1/012034.
    WoS 

  6. Pugacheva (Vandysheva) N.B. Makarov A.V. Senaeva (Pugacheva) E.I. Volkova E.G. Crystallization of Dissimilar Ti/Cu/ Steel Laser Welds // Journal of Crystal Growth. 2019. Vol. 526. Art. 125212. https://doi.org/10.1016/j.jcrysgro.2019.125212.
    WoS 

  7. Gushchina N.V. Ovchinnikov V.V. Makhin'ko F.F. Vichuzhanin D.I. Effect of ion irradiation on low-cycle fatigue of pressed profiles of the V95 alloy after artificial aging // Journal of Physics: Conference Series. 2019. Vol. 1396. 012021. – DOI: 10.1088/1742-6596/1396/1/012021.
    WoS 

  8. Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Kolobyilin Yu.M. Effect of laser alloying with the powder mixtures of Cu–Zn–Ti and Si–Cu on the structure and properties of cast aluminum alloy // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science. 2019. Vol. 21. No. 4. P. 70–84. DOI: 10.17212/1994-6309-2019-21.4-70-84.
    WoS 

  9. Berezin I.M. Zalazinskiy A.G. Bykova (Gurchenko) T.M. Nesterenko A.V. Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die // PNRPU Mechanics Bulletin. 2019. No. 3. P. 5-16. DOI: 10.15593/perm.mech/2019.3.01.
    Scopus 

  10. Titov V.G. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Multi-Criteria Optimization by the “Ideal Point” Method of Raw Material Composition for Composite Blank Manufacturing // Izv. Vuzov Poroshk. Metallurgiya i funkts. pokrytiya. 2019. No. 2. P. 49-56. DOI dx.doi.org/10.17073/1997-308X-2019-2-49-56.
    РИНЦ 

  11. Rekov A.M. Vichuzhanin D.I. Strain Distribution in the Neck of a Flat Sample of Titanium VT1-00 under Uniaxial Tension // Mekhanika kompozitsionnykh materialov i konstruktsii. 2019. Vol. 25. No. 4. P. 522-530. DOI: 10.33113/mkmk.ras.2019.25.04.522_530.05.
    РИНЦ 

  12. Smirnov A.S. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Belozerov G. A. Konovalov A.V. Vichuzhanin D.I. Muizemnek O.Yu. Effect of Silicon Carbide Particles on the Mechanical and Plastic Properties of the AlMg6/10% SiC Metal Matrix Composite // Journal of Composite Materials. 2018. Vol. 52. Iss. 24. P. 3351–3363. DOI:10.1177/0021998318765622.
    WoS  Scopus 

  13. Konovalov D.A. Veretennikova (Golubkova) I.A. Study on mechanical properties of a bimetallic composite produced by explosion welding under incremental plastic deformation // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 215-219. DOI: 10.22226/2410-3535-2018-2-215-219.
    WoS  Scopus 

  14. Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Michurov N.S. The laser-welded joint of an austenitic corrosion-resistant steel and a titanium alloy with an intermediate copper insert // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 42-47. DOI: 10.22226/2410-3535-2018-1-42-47.
    WoS  Scopus 

  15. Vichuzhanin D.I. Yolshina I.A. Muradymo R.V. Nesterenko A.V. A fracture for 1 wt% aluminum-graphene metal matrix composite at 300ºC // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 184-189. DOI: 10.22226/2410-3535-2018-2-184-189.
    WoS  Scopus 

  16. Vichuzhanin D.I. Smirnov S.V. Nesterenko A.V. Igumnov A.S. A fracture Locus for a 10 Volume-Percent V95/SiC Metal Matrix Composite at the Near-Solidus Temperature // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 88-93. DOI: 10.22226/2410-3535-2018-1-88-93.
    WoS  Scopus 

  17. Kaigorodova L.I. Rasposienko D.Yu. Pushin V.G. Pilyugin V.P. Smirnov S.V. Influence of Severe Plastic Deformation on the Structure and Properties of Al-Li-Mg-Zr-Sc-Zn Alloy // Physics of Metals and Metallography. 2018. Vol. 119. – No. 2. – P. 161-168. – DOI: 10.1134/S0031918X18020060.
    WoS  Scopus 

  18. Berdnikov K.V. Struzhanov V.V. Equilibrium State of a Softening Elastoplastic Medium with an Expanding Spherical Cavity // Journal of Applied Mechanics and Technical Physics. 2018. Vol. 59. Iss. 1. P. 104-111. DOI: 10.1134/S0021894418010133.
    WoS  Scopus 

  19. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Igumnov A.S. A Numerical Study of Plastic Strain Localization and Fracture in Al/SiC Metal Matrix Composite // Physical Mesomechanics. 2018. Vol. 21. – Iss. 4. – P. 305-313. – DOI: 10.1134/S1029959918040045.
    WoS  Scopus 

  20. Konovalov D.A. Smirnova (Yekzemplyarova) E.O. Smirnov A.S. Determining AlMg6/10%SiCp Representative Elementary Volume Size by Kinetic Indentation // AIP Conference Proceedings. 2018. Vol. 2053. 040045. https://doi.org/10.1063/1.5084483.
    WoS 

  21. Michurov N.S. Pugacheva (Vandysheva) N.B. Veretennikova (Golubkova) I.A. Khalevitskiy Yu.V. Smirnova (Yekzemplyarova) E.O. Igumnov A.S. Contribution of Intermetallics to the Formation of the Stress-Strain State of Tensile Welds on the AISI 321 Steel and the Grade 2 Titanium Alloy with a Copper Insert // AIP Conference Proceedings. 2018. Vol. 2053. – 040058. – https://doi.org/10.1063.
    WoS 

  22. Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Malyigina I.Yu. Trushina E.B. Formation of the Structure of Fe-Ni-Ti-C-B Composites Under Self-Propagating High-Temperature Synthesis // AIP Conference Proceedings. 2018. Vol. 2053. 020013. https://doi.org/10.1063/1.5084359.
    WoS 

  23. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. Studying the Structure and Micromechanical Properties of a Hardfaced Wear-Resistant Coating // AIP Conference Proceedings. 2018. Vol. 2053. 040079. https://doi.org/10.1063/1.5084517.
    WoS 

  24. Pugacheva (Vandysheva) N.B. Michurov N.S. Vichuzhanin D.I. Contribution of low-melting eutectics to the plastic deformation of aluminum matrix composites // AIP Conference Proceedings. 2018. Vol. 2051. 020247. https://doi.org/10.1063/1.5083490.
    WoS 

  25. Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.
    WoS 

  26. Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.
    WoS 

  27. Smirnov A.S. Khalevitskiy Yu.V. Myasnikova M.V. Simulating the Deformation Process of AlMg6/10%SiCp Composite Representative Volume under Macroscopic Uniaxial Strain // AIP Conference Proceedings. 2018. Vol. 2053. 030065. https://doi.org/10.1063/1.5084426.
    WoS 

  28. Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Kopeina A.V. A Fracture Locus for an Aluminum-Based Metal Matrix Composite at 450°С // AIP Conference Proceedings. 2018. Vol. 2053. – 020014. – https://doi.org/10.1063/1.5084360.
    WoS 

  29. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Smirnov S.V. Pestov A.V. Konovalov D.A. Adhesive Characteristics of Epoxy Glue in Relation to the Microgeometry of the Substrate Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030066. – https://doi.org/10.1063/1.5084427.
    WoS 

  30. Struzhanov V.V. Korkin A.V. Reconstruction of a Tensile Diagram with a Falling Branch from a Pure Bending Diagram // AIP Conference Proceedings. 2018. Vol. 2053. – 030071. – https://doi.org/10.1063/1.5084432.
    WoS 

  31. Volkov S.S. Struzhanov V.V. Critical Microfracture and the Safety Factor in Deformation of Structurally Heterogeneous Materials // AIP Conference Proceedings. 2018. Vol. 2053. – 040102. – https://doi.org/10.1063/1.5084540.
    WoS 

  32. Struzhanov V.V. Korkin A.V. Chaykin A.E. One approach to determination of the ultimate load-bearing capacity of mechanical systems with softening elements // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 4. P. 1-12. DOI: 10.14498/vsgtu1624.
    WoS 

  33. Rekov A.M. Vichuzhanin D.I. The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 53-60. DOI: 10.15593/perm.mech/2018.3.06.
    Scopus 

  34. Konovalov A.V. Kozlov A.V. Konovalov D.A. Partin A.S. Features of Stress-Strain State of Thin-Walled Circular Single-Edge-Notch Specimen under Eccentric Tension // PNRPU Mechanics Bulletin. 2018. No. 3. P. 44-52. DOI: 10.15593/perm.mech/2018.3.05.
    Scopus 

  35. Smirnov S.V. Kruchkov D.I. Nesterenko A.V. Berezin I.M. Vichuzhanin D.I. Experimental study of short-term transient creep of the Al/SiC metal-matrix composite under uniaxial compression // PNRPU Mechanics Bulletin. 2018. No. 4. DOI: 10.15593/perm.mech/2018.4.09.
    Scopus 

  36. Struzhanov V.V. Vichuzhanin D.I. A Method for Converting an Experimental Torsion Diagram for a Cylindrical Specimen to the Stress-Strain Diagram of the Material // PNRPU Mechanics Bulletin. 2018. No. 2. P. 107-113. DOI: 10.15593/perm.mech/2018.2.10.
    Scopus 

  37. Vichuzhanin D.I. Yolshina L.A. Smirnov A.S. Muradymov R.V. A Fracture Locus for a 2 Wt % Aluminum-Graphene Metal Matrix Composite at 300° C // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 17-26. DOI: 10.15593/perm.mech/2018.3.02.
    Scopus 

  38. Brusentseva T.A. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Stydying the Influence of the Nature of the Filler on the Mechanical Properties of the Der-330 Epoxy Resin [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 27-36. DOI: 10.17804/2410-9908.2018.6.027-036.
    РИНЦ 

  39. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
    РИНЦ 

  40. Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
    РИНЦ 

  41. Smirnov S.V. Khotinov V.A. Vichuzhanin D.I. Polukhina O.N. Farber V.M. The Digital Image Correlation Method Applied to Studyingthe Plastic Flowof the 08g2bmsteel under Tension [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 6-13. DOI: 10.17804/2410-9908.2018.3.006-013.
    РИНЦ 

  42. Smirnov S.V. Konovalov D.A. Kalashnikov S.T. Smirnova (Yekzemplyarova) E.O. Studying the Adhesion Strength and Mechanical Properties of Coatings on Aluminum-Magnesium Alloy Samples [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 106-115. DOI: 10.17804/2410-9908.2018.5.106-115.
    РИНЦ 

  43. Zadvorkin S.M. Shveikin V.P. Kalashnikov S.T. Antenorova N.P. On the Applicability of Electromagnetic Testing Methods to Detecting Discontinuities in Steel Structures Intended for Operation in Aggressive Media Under Extreme Loads // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 8-17. DOI: 10.17804/2410-9908.2018.6.008-017.
    РИНЦ 

  44. Kruchkov D.I. Zalazinskiy A.G. Romanova O.V. Nesterenko A.V. Smirnova (Yekzemplyarova) E.O. Determination of parameters for the plasticity model of VT-22 alloy powder particles // Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional'nye pokrytiya. 2018. No. 2. P. 4-12. DOI: 10.17073/1997-308X-2018-2-4-12.
    РИНЦ 

  45. Guryanov G.N. Smirnov S.V. Problemy chernoi metallurgii i materialovedeniya Influence of the contact friction on the stressed state and allowable stress of backward pullin the course // Problemy chernoi metallurgii i materialovedeniya. 2018. No. 1. P. 5-14.
    РИНЦ 

  46. Guryanov G.N. Smirnov S.V. Drawing conditions of round solid profile without axial stress increment because of back tension action // Technologiya metallov. 2018. No. 9. P. 3-12. DOI: 10.31044/1684-2499-2018-9-3-12.
    РИНЦ 

  47. Guryanov G.N. Smirnov S.V. Influence of curve shape of strain hardening on drawing stress and safety factor of round solid profile // Technologiya metallov. 2018. No. 2. P. 13-24.
    РИНЦ 

  48. Guryanov G.N. Smirnov S.V. On development of energy-saving conditions of solid round profile drawing // Technologiya metallov. 2018. No. 7. P. 9-20. DOI: 10.31044/1684-2499-2018-7-9-20.
    РИНЦ 

  49. Guryanov G.N. Smirnov S.V. Influence of the intensitivity of simple strength and size of the work confusion of fiber on axial voltage, stability of strength and growth of medium temperature in the drawing line of wire // Uprochnyayushchie tekhnologii i pokrytiya. 2018. Vol. 14. No. 3 (159). P. 99-106.
    РИНЦ 

  50. Churbaev R.V. Vichuzhanin D.I. A Device for Measuring the Torque upon Loading the Substance by the method of P.W. Bridgman // Zavodskaya laboratoriya. Diagnostika materialov. 2018. Vol. 84. No. 4. P. 66-70. DOI: 10.26896/1028-6861-2018-84-4-66-70.
    РИНЦ 

  51. Konovalov D.A. Veretennikova (Golubkova) I.A. STUDY ON MECHANICAL PROPERTIES OF A BIMETALLIC COMPOSITE PRODUCED BY EXPLOSION WELDING UNDER INCREMENTAL PLASTIC DEFORMATION Письма о материалах . DOI: 10.22226/2410-3535-2018-2-215-219. 2018. Vol. 8. № 2 (30). P. 215-219.

  52. Pugacheva (Vandysheva) N.B. Malyigina I.Yu. Michurov N.S. Pugacheva E.I. Antenorova N.P. Effect of Heat Treatment on the Structure and Phase Composition of Aliminum Matrix Composites Containing Silicon Carbide [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. – DOI: 10.17804/2410-9908.2017.6.028-036. 2017. Iss. 6. P. 28-36.

  53. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. George Kovacs Influence of Stress State Conditions on Densification Behavior of Titanium Sponge // Acta Polytechnica Hungarica. 2017. Vol. 14. – No. 6. P. 153-168.

  54. Kruchkov D.I. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Vichuzhanin D.I. Studying the Compactibility of the VT22 High-Strength Alloy Powder Obtained by the PREP Method // AIP Conf. Proc. 2017. Vol. 1915. – 040029.
    Full text>>

  55. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Michurov N.S. Senaeva (Pugacheva) E.I. Cheremicina E.R. Effect of the Content of SiC on the Structure and Properties of D16 alloy matrix composites // AIP Conf. Proc. 2017. Vol. 1915. – 030021.
    Full text>>

  56. Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. E.V. Derevyankin EBSD Analysis of the Structural State of the Cu-Zn-Mn-Al-Fe-Ni Alloy after Hot Deformation // AIP Conf. Proc. 2017. Vol. 1915. – 030020.
    Full text>>

  57. Smirnov A.S. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Effect of Fillers in Epoxy Coatings Based on the ED-20 Resin on the Mechanical Properties Determined by Instrumented Microindentation // AIP Conf. Proc. 2017. Vol. 1915. – 020008.
    Full text>>

  58. Struzhanov V.V. Korkin A.V. Destruction of Nanochains under Stressing // AIP Conf. Proc. 2017. Vol. 1915. – 030028.
    Full text>>

  59. Volkov S.S. Struzhanov V.V. Fatigue Durability under Random Cyclic Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040062.
    Full text>>

  60. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Choosing the Optimal Pareto Composition of the Charge Material for the Manufacture of Composite // AIP Conf. Proc. 2017. Vol. 1915. – 040068.
    Full text>>

  61. Zamaraev L.M. Smirnov S.V. High-Temperature Short-Term Creep of the 2 and Ti-5Al Titanium Alloys under Heating in Air and Helium // AIP Conf. Proc. 2017. Vol. 1915. – 040069.
    Full text>>

  62. A.P. Karamyshev I.I. Nekrasov Nesterenko A.V. Parshin S.V. Smirnov S.V. Shveikin V.P. A.A. Fedulov Studying Damage Accumulation in Martensitic Corrosion-Resistant Steel under Cold Radial Reduction // AIP Conf. Proc. – 2017. Vol. 1915. – 030007.
    Full text>>

  63. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Smirnov A.S. Effect of Hot Plastic Deformation on the Structural State of a Al-10%SiC Composite // AIP Conf. Proc. – 2017. Vol. 1915. – 030022.
    Full text>>

  64. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov Modeling the Stress-Strain State of the V95/SiC Aluminum Alloy Matrix Composite under Uniaxial Loading // AIP Conf. Proc. – 2017. Vol. 1915. – 030026.
    Full text>>

  65. Michurov N.S. Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. The Structural State and Geometric Representation of a Laser-Welded Joint between a Corrosion-Resistant Steel and a Titanium Alloy with a Copper Insert . –https://doi.org/10.1063/1.5013818 // AIP Conference Proceedings. 2017. Vol. 1909. – 020137.

  66. Pugacheva (Vandysheva) N.B. A.N. Cherepanov A.M. Orishich A.G. Malikov I.O. Drozdov V.I. Mali Senaeva (Pugacheva) E.I. Investigation of the Structure and Properties of a Composite Insert Applied at Laser Welding of Steel with Titanium // AIP Conference Proceedings. 2017. Vol. 1893. – 030107.
    Text in >>

  67. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Bykova (Gurchenko) T.M. Pugacheva E.I. Aluminium Matrix Composites with a SiC Filler . – https://doi.org/10.1063/1.5013861 // AIP Conference Proceedings. 2017. Vol. 1909. – 020180.

  68. Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. Trushina E.B. A.V. Gerasimova Agapitova O.Yu. Antenorova. Reasons for Cracking of Die-Forged Cuzn34mn3al2feni Brass Blanks [Electronic resource] . – DOI: 10.17804/2410-9908.2017.4.061-080 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 61-80.

  69. Savrai R.A. Makarov A.V. Malyigina I.Yu. Rogovaya S.A. Osinceva A.L. Improving the Strength of the AISI 321 Austenitic Stainless Steel by the Frictional Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.5.043-062. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 5. P. 43-62.

  70. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov A Computational Model of V95/SiCp (7075/ SiCp) Aluminum Matrix Composite Applied to Stress-Strain State Simulation under Tensile, Compressive and Shear Loading Conditions [Electronic resource] . – DOI: 10.17804/2410-9908.2017.6.016-027 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 16-27.

  71. Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Estimating the Effect of Fillers on the Mechanical Properties of Epoxy Glue Coatings by Microindentation [Electronic resource] – DOI: 10.17804/2410-9908.2017.6.103-111 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 103-111.

  72. Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. V.М. Fomin A.А. Filippov Т.А. Brusentseva Studying Epoxy Resin Reinforced with Silica Dioxide Nanoparticles by Microindentation [Electronic resource] // . – DOI: 10.17804/2410-9908.2017.1.024-035 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 24-35.

  73. Volkov S.S. Struzhanov V.V. Modeling of a Complete Deformation Diagram for Materials with Properties of Auxetics [Electronic resource] . – DOI: 10.17804/2410-9908.2017.2.040-052 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 2. P. 40-52.

  74. S.V. Anakhov Pugacheva (Vandysheva) N.B. Yu.A. Pykin A.V. Matushkin Bykova (Gurchenko) T.M. Qualitative Study of Steel Cutting with the Use of the Narrow Jet Plasma Technology // Inorganic Materials: Applied Research. 2017. Vol. 8. – No. 3. P. 400-405.

  75. Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Smirnov A.S. Pugacheva (Vandysheva) N.B. Konovalov A.V. A fracture locus for a 50 volume-percent Al/SiC metal matrix composite at high temperature // International Journal of Material Forming. 2017. Vol. 10. – Iss. 5. P. 831–843.
    Full text>>

  76. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Hierarchical modeling of deformation and damage of metal matrix composite under uniaxial loading conditions . – doi:10.1088/1757-899X/208/1/012037 // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012037.
    Full text>>

  77. E.V. Shalaeva N.I. Medvedeva A.E. Precul Smirnova (Yekzemplyarova) E.O. Smirnov S.V. N.I. Shchegolikhina I.O. Selyanin Ordering Effect on the Mechanical, Electronic and Magnetic Properties of the –Based Non-Canonical Approximant Phase: -Al50Cu33Fe17’-Al50Cu44Fe6 and -Al47.5Cu49.5Fe3 // Philosophical Magazine. 2017. Vol. 97. – No. 13. P. 1024-1046.

  78. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Identification of the Modified Drucker-Prager Yield Condition and Modeling of Compaction of the Plasticized Titanium Feedstock // Russian Journal of Non-Ferrous Metals. 2017. Vol. 58. – No. 2. P. 297-302.

  79. L.A. Elshina R.V. Muradymov A.G. Kvashnichev Vichuzhanin D.I. N.G. Molchanova A.A. Pankratov Synthesis of New Metal-Matrix Al-Al2O3-Graphene Composite Materials // Russian Metallurgy (Metally). 2017. No. 8. P. 631-641.

  80. Mironov V.I. O. Lukashuk Vichuzhanin D.I. Method for Describing Fatigue Processes in Structural Materials // Solid State Phenomena. 2017. Vol. 265. P. 815-820.

  81. Struzhanov V.V. On the method of orthogonal projections in the theory of elasticity // Vestnik Samarskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Fiziko-matematicheskie nauki. 2017. Vol. 21. – No. 2. P. 308-325.

  82. Smirnov S.V. Myasnikova M.V. Pugacheva (Vandysheva) N.B. Hierarchical of plastic deformation and fracture of complexly aiioyed brass // International Journal of Damage Mechanics. 2016. vol. 25, № 2. P. 251 – 265.

  83. Smirnov S.V. Zamaraev L.M. Energy of Activation of the Vt5 and Vt1-0 Titanium Alloys under Short-Term Creep in Air and Argon [Electronic resource]. 2016. Iss. 6.

  84. Pugacheva (Vandysheva) N.B. Zamaraev L.M. Igumnov А.S. Modeling the Thermo-Stressed State in the Nodes of the Honeycomb Structure with a Non-Uniform Distribution of Physical-Mechanical Properties [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4.. P. 71-88.

  85. Smirnov S.V. Myasnikova M.V. Igumnov A.S. Determination of the Local Shear Strength of a Layered Metal Composite Material with a Ductile Interlayer after Thermocycling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 46-56.

  86. Smirnov S.V. Perunov E.N. Konovalov D.A. Vyskrebentsev S.V. Using a Spatial Location Device for Express Diagnostics of Current Mechanical Properties of Metal Structures [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 89-94.

  87. Struzhanov V.V. Volkov S.S. Volkova T.A. Devolopment of Microstructure Damage in Structurally Heterogeneous Materials under Deformation [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 3. P. 21-30.

  88. Veretennikova (Golubkova) I.A. Vichuzhanin D.I. Michurov N.S. Smirnov S.V. Mechanical Properties and Fracture Behavior of the "copper M1 – Steel 09g2s" Bimetal Produced by Explosion Welding [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. P. 28-38.

  89. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Optimizing the Composition of a Composite to Be Pressed from a Noncompact Titanium-Based Raw Material [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 5. P. 39-48.

  90. Smirnov S.V. Myasnikova M.V. Pugacheva (Vandysheva) N.B. Hierarchical Simulation of Plastic Deformation and Fracture of Complexly Alloyed Brass // International Journal of Damage Mechanics. 2016. Vol. 25(2). P. 251-265.

  91. Smirnov A.S. Konovalov A.V. Belozerov G. A. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Peculiarities of the rheological behavior and structure formation of aluminum under deformation at near-solidus temperatures // International Journal of Minerals, Metallurgy and Materials // International Journal of Minerals, Metallurgy and Materials. 2016. Vol.23. – Iss. 5. P. 563-571.

  92. Yolshina L.A. Muradymov R.V. Korsun I.V. Yakovlev G.A. Smirnov S.V. Novel Aluminum-Graphene and Aluminum-Graphite Metallic Composite Materials: Synthesis and Properties // Journal of Alloys and Compounds. 2016. No. 663. P. 449-459.

  93. Smirnov S.V. Konovalov D.A. Parshin S.V. Vyskrebentsev S.V. Degtyar’ V.G. Kalashnikov S.T. Taking into account the residual stresses during transverse calculation of the load frame to extend the service life above the warranty period // Journal of Machinery Manufacture and Reliability. 2016. Vol. 45. – Is. 3. P. 233-238.

  94. Smirnov A.S. Belozerov G. A. Smirnova (Yekzemplyarova) E.O. Konovalov A.V. Muizemnek O.Yu. Specimen Preparation for Metal Matrix Composites with a High Volume Fraction of Reinforcing Particles for EBSD Analysis // Journal of Materials Engineering and Performance. 2016. Vol. 25(7). P. 2907-2913.

  95. Pugacheva (Vandysheva) N.B. Michurov N.S. Bykova (Gurchenko) T.M. Structure and Properties of the Al/SiC Composite Material // Physics of Metals and Metallography. 2016. Vol. 117. – No. 6. P. 634-640.

  96. Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. Bykova (Gurchenko) T.M. Structure and Thermophysical Properties of Aluminum-Matrix Composites // Physics of Metals and Metallography. 2016. Vol. 117. – No. 11. P. 1145-1152.

  97. Pugacheva (Vandysheva) N.B. Myasnikova M.V. Michurov N.S. Simulation of the Elastic Deformation of Laser-Welded Joints of an Austenitic Corrosion-Resistant Steel and a Titanium Alloy with an Intermediate Copper Insert // Physics of Metals and Metallography. 2016. Vol. 117. – No. 2. P. 216-224.

  98. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Kalashnikov S.T. Ivanov A.V. Smirnov S.V. Frolova N.Yu. Studying Recovery Processes in a Strain-Hardened Al-Mg-Mn-Fe-Si Alloy // Physics of Metals and Metallography. 2016. Vol. 117. – No. 9. P. 920-926.

  99. Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A numerical Study of Sress-Strain Evolution in Structurally Inhomogeneous Materials Subjected to Uniaxial Loading // PNRPU Mechanics Bulletin. 2016. No. 3. P. 175-187.

  100. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Michurov N.S. Senaeva (Pugacheva) E.I. INVESTIGATION OF LOCAL MECHANICAL PROPERTIES OF MATERIALS IN WELDED JOINTS OF THE VT1-0 TITANIUM ALLOY AND THE 12CR18NI10TI AUSTENITIC CORROSION RESISTANT STEEL WITH AN INTERMEDIATE COPPER INSERT WITH THE USE OF A NANOMECHANICAL TESTING SYSTEM. DOI: 10.1063/1.4967107 // AIP Conference Proceedings. 2016. Vol. 1785. С. 040050.

<< Васк | | Forward >>