<< Васк |
  1. Kazakov A.L. Kuznetsov P.A. Spevak L.F. A Heat Wave Problem for a Degenerate Nonlinear Parabolic Equation with a Specified Source Function // AIP Conference Proceedings. 2018. Vol. 2053. – 030024. – https://doi.org/10.1063/1.5084385.
    WoS 

  2. Kuznetsov A.V. Drukarenko N.A. Kamantsev I.S. Mironov V.I. Experimental Evaluation of Crack Growth Modeling Results in a Gray Pig Iron Plate // AIP Conference Proceedings. 2018. Vol. 2053. 030033. https://doi.org/10.1063/1.5084394.
    WoS 

  3. Mironov V.I. Ogorelkov D. A. Yakovlev V.V. Influence of Structural Damping on the Durability of a Crane Metal Construction // AIP Conference Proceedings. 2018. Vol. 2053. – 040060. – https://doi.org/10.1063/1.5084498.
    WoS 

  4. Solovei V.D. Construction of Velocity Disturbances for a Special Stationary Flow of a Viscoplastic Strip under Rolling // AIP Conference Proceedings. 2018. Vol. 2053. – 030069. – https://doi.org/10.1063/1.5084430.
    WoS 

  5. Spevak L.F. Nefedova O.A. Parallel Technology for Solving the Poisson Equation in Axisymmetric Domains by the Boundary Element Method // AIP Conference Proceedings. 2018. Vol. 2053. – 030070. – https://doi.org/10.1063/1.5084431.
    WoS 

  6. Volkov S.S. Struzhanov V.V. Critical Microfracture and the Safety Factor in Deformation of Structurally Heterogeneous Materials // AIP Conference Proceedings. 2018. Vol. 2053. – 040102. – https://doi.org/10.1063/1.5084540.
    WoS 

  7. Emelyanov I.G. Mironov V.I. A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 27-35. DOI: 10.15593/perm.mech/2018.3.03.
    Scopus 

  8. Kazakov A.L. Spevak L.F. Nefedova O.A. On the Numerical-Analytical Approaches to Solving a Nonlinear Heat Conduction Equation with a Singularity [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 100-116. DOI: 10.17804/2410-9908.2018.6.100-116.
    РИНЦ 

  9. Nefedova O.A. Vykhodets V.B. A Procedure for Online Investigation of Deuterium Diffusion in Materials [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 57-63. DOI: 10.17804/2410-9908.2018.5.057-063.
    РИНЦ 

  10. Nefedova O.A. Vykhodets V.B. Kurennykh T.E. A Procedure for Studying the Effect of Radiation Defects on the Diffusion Coefficients of Deuterium in Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 64-73. DOI: 10.17804/2410-9908.2018.5.064-073.
    РИНЦ 

  11. Solovei V.D. A Variational Principle for the Disturbances of Particle Velocities in the Flow of a Perfectly Plastic Strip under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 83-91. DOI: 10.17804/2410-9908.2018.2.083-091.
    РИНЦ 

  12. Kazakov A.L. Kuznetsov P.A. Spevak L.F. On a Three-Dimensional Heat Wave Generated by Boundary Condition Specified on a Time-Dependent Manifold // Izvestiya Irkutskogo gosudarstvennogo universiteta. Seriya: Matematika. 2018. Vol. 26. P. 16-33.
    РИНЦ 

  13. Churbaev R.V. Fedotov V.P. Cheremicina E.R. High ductility of magnesium at different styrain rates under pressure // Voprosy materialovedeniya. 2018. No. 1. P. 27-34.
    РИНЦ 

  14. Loginov Yu.N. Babaylov N.A. Polyanskii L.I. Effect of the Precompaction Pressure on the Density Distribution in a Metallurgical Briquette during Roller Pressing // Metallurgist. 2017. Vol. 61. No. 9-10. P. 849-852. DOI 10.1007/s11015-018-0574-5.
    WoS  Scopus 

  15. Yu.N. Loginov A.E. Pervukhin Babaylov N.A. Evolution of Surface Defects in Platinum Alloy Wire under Drawing // AIP Conf. Proc. 2017. Vol. 1915. – 040032.
    Full text>>

  16. Yu.N. Loginov Babaylov N.A. L.I. Polyansky The Properties of Coke Breeze Briquettes Produced by Ram Briquetting // AIP Conf. Proc. 2017. Vol. 1915. – 040034.
    Full text>>

  17. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluating the Effect of Damping Structures in the Design of a Locomotive Cab during a Collision // AIP Conf. Proc. 2017. Vol. 1915. – 040011.
    Full text>>

  18. Kazakov A.L. A.A. Lempert P.A. Kuznetsov On the Analytic Solvability of a Special Boundary Value Problem for the Nonlinear Heat Equation // AIP Conf. Proc. 2017. Vol. 1915. – 020003.
    Full text>>

  19. Mironov V.I. O.A. Lukashuk D.A. Ogorelkov Estimation of Metallic Structure Durability for a Known Law of Stress Variation // AIP Conf. Proc. 2017. Vol. 1915. – 040039.
    Full text>>

  20. Prosviryakov E.Yu. Spevak L.F. Exact Solutions for Layered Thermocapillary Convection of a Viscous Incompressible Fluid with Specified Stresses on the Bottom // AIP Conf. Proc. 2017. Vol. 1915. – 030019.
    Full text>>

  21. Prosviryakov E.Yu. Spevak L.F. Simulation of a Viscous Flow in Layered Composites in View of the Thermocapillary Effect // AIP Conf. Proc. 2017. Vol. 1915. – 040047.
    Full text>>

  22. Solovei V.D. Kolmogorov V.L. A Method for Calculating the Plastic Anisotropy Constants of the Hill Theory // AIP Conf. Proc. 2017. Vol. 1915. – 040053.
    Full text>>

  23. Spevak L.F. Kazakov A.L. Solving a Degenerate Nonlinear Parabolic Equation with a Specified Source Function by the Boundary Element Method // AIP Conf. Proc. 2017. Vol. 1915. – 040054.
    Full text>>

  24. Spevak L.F. Nefedova O.A. Solving a Two-Dimensional Nonlinear Heat Conduction Equation with Nonzero Boundary Conditions by the Boundary Element Method // AIP Conf. Proc. 2017. Vol. 1915. – 040055.
    Full text>>

  25. Volkov S.S. Struzhanov V.V. Fatigue Durability under Random Cyclic Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040062.
    Full text>>

  26. Ogorelkov D. A. Kamantsev I.S. Vladimirov A.P. Khudorozhkova Yu.V. Numerical and Experimental Approaches to the Evaluation of the Fatigue Life of a Cylindrical Specimen made of the 09G2S Steel // AIP Conf. Proc. – 2017. Vol. 1915. – 040010.
    Full text>>

  27. Ogorelkov D. A. Kamantsev I.S. Kuznetsov A.V. Vladimirov A.P. Khudorozhkova Yu.V. Numerical and Experimental Approaches to the Evaluation of the Fatigue Life of a Cylindrical Specimen made of the 09G2S Steel // AIP Conference Proceedings. 2017. 1915. – 040010. 5 p.

  28. Kazakov A.L. Spevak L.F. Nefedova O.A. Simultenious Application of the Boundary Element Method and the Power Series Method for Solving a Two-Dimensional Problem of Heat Wave Motion [Electronic resource] . – DOI: 10.17804/2410-9908.2017.6.006-015 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 6-15.

  29. Shubina A.N. Babaylov N.A. Modeling of Radial Forging of a Hollow Ingot in Multiple Die Units [Electronic resource] . – URL: http://dream-journal.org/issues/2017-4/2017-4_147.html // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 6-15.

  30. Volkov S.S. Struzhanov V.V. Modeling of a Complete Deformation Diagram for Materials with Properties of Auxetics [Electronic resource] . – DOI: 10.17804/2410-9908.2017.2.040-052 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 2. P. 40-52.

  31. Yu.N. Loginov Babaylov N.A. D.N. Pervukhina The Action Result of the Concentrated Load on the Briquettes which Obtained from the Technogenous Material . – DOI 10.18502/kms.v2i2.953 // International Conference with Elements of School for Young Scientists on Recycling and Utilization of Technogenic Formations, KnE Materials Science. 2017. P. 97-101.

  32. Prosviryakov E.Yu. Spevak L.F. Exact Solutions for Stationary and Unsteady Layered Convection of a Viscous Incompressible Fluid with the Specified Velocities at the Bottom . – doi:10.1088/1757-899X/208/1/012035. // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012035.
    Full text>>

  33. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Determination of Safe Operating Conditions for Supporting Structures under Abnormal Loads // Journal of Machinery Manufacture and Reliability. 2017. Vol. 46. – No. 2. P. 142-148.

  34. Mironov V.I. Ivanovich and Lukashuk Olga Anatolievna. Influence of Material Structural Inhomogeneity on Fracture Strength of Constructional Elements // Key Engineering Materials. 2017. Vol. 735. P. 89-94.

  35. Mironov V.I. Lukashuk O. Ogorelkov D. Fracture Strength for Metal Structure of a Crane . – DOI; 10.1051/matecconf/201712906008 // Matec Web of Conferences. 2017. Vol. 129. – 06008.

  36. Mironov V.I. Lukashuk O. Ogrelkov D. Method of Increasing Durability of Thin-Walled Structural Elements . – DOI; 10.1051/matecconf/201712901024 // Matec Web of Conferences. 2017. Vol. 129– 01034.

  37. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Vehicle Survivability Calculation // Russian Journal of Construction Science and Technology. 2017. Vol. 3. – No. 1. P. 40-44.

  38. Mironov V.I. O. Lukashuk Vichuzhanin D.I. Method for Describing Fatigue Processes in Structural Materials // Solid State Phenomena. 2017. Vol. 265. P. 815-820.

  39. Kazakov A.L. Spevak L.F. An analytical and numerical study of a nonlinear parabolic equation with degeneration for the cases of circular and spherical symmetry // Applied Mathematical Modelling. 2016. Vol. 40. Issue 2. P. 1333-1343.

  40. Bychkov I.V. Kazakov A.L. Lempert A.A. Bukharov D.S. Stolbov A.B. An Intelligent Manage-ment System for the Development of a Regional Transport Logistics Infrastructure // Automation and Remote Control. 2016. Vol. 77. – No. 2. P. 332-343.

  41. Spevak L.F. Nefedova O.A. Parallelizing the Solution of the Nonlinear Heat Conduction Problem with the Application of the OpenCL Library [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6.

  42. Struzhanov V.V. Volkov S.S. Volkova T.A. Devolopment of Microstructure Damage in Structurally Heterogeneous Materials under Deformation [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 3. P. 21-30.

  43. Babaylov N.A. Polyansky L.I. Loginov Yu.N. Briquetting Metallurgical Lime Screenings and Parameters Making it Possible to Improve Process Efficiency // Metallurgist. 2016. Vol. 60. – Iss. 5-6. P. 576-580.

  44. Mironov V.I. Lukashuk O.A. Calculation of Metalwork Life with Allowance for Cyclic Degradation of Material in Operation // Solid State Phenomena. 2016. Vol. 870. P. 725-729.

  45. Aristov S.N. Prosviryakov E.Yu. Spevak L.F. Unsteady-State Benard-Marangoni Convection in Layered Viscous Incompressible Flows // Theoretical Foundations of Chemical Engineering. 2016. Vol. 50. – No. 2. P. 132-141.

  46. Polianski L.I. Babaylov N.A. Loginov Yu.N. Pervukhina D.N. Industrial Recycling of Technogenic Wastes and Mineral Ore Processing // AIP Conf. Proc. 2016. Vol. 1785. – 040046. – http://dx.doi.org/10.1063/1.4967103.

  47. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. The Definition of the Resistance Area Boundaries for a Locomotive Operator Cab under Non-Regulated Loads // AIP Conf. Proc. 2016. Vol. 1785. – 040014. – http://dx.doi.org/10.1063/1.4967071.

  48. Spevak L.F. Nefedova O.A. Solving a Two-Dimensional Nonlinear Heat Conduction Equation with Degeneration by the Boundary Element Method with the Application of the Dual Reciprocity Method // AIP Conf. Proc. 2016. Vol. 1785. – 040077. – http://dx.doi.org/10.1063/1.4967134.

  49. Bychkov I.V. Kazakov A.L. Lempert A.A. Bukharov D.S. Stolbov A.B. An Intelligent Management System for the Development of a Regional Transport Logistics Infrastructure // Automation and Remote Control. 2015. Vol. 72. No. 8.

  50. Kazakov A.L. Lempert A.A. Bukharov D.S. Mathematical Model and Program System for Solving a Problem of Logistic Objects Placement // Automation and Remote Control. 2015. Vol. 72. No. 8.

  51. Kazakov A.L. Lempert A.A. On Mathematical Models for Optimization Problem of Logistics Infrastructure // International Journal of Artificial Intelligence. 2015. No. 13 (1). P. 200-210.

  52. Solovei V.D. Prigogine theorem for the process of rolling of a viscoplastic strip // Journal of Engineering Physics and Thermophysics. 2015. Vol. 88. № 3. P. 561-567.

  53. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. On an approach to the evaluation of the strength of a spatial rod system under impact loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 16-23.

  54. Solovei V.D. Possible Velocity Disturbances in the Lag Zone and on the Free Boundary in a Viscoplastic Strip under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 49-59. URL: http://dream-journal.org/issues/2015-4/2015-4_35.html.

  55. Kazakov A.L. Spevak L.F. Numerical and analytical studies of a nonlinear parabolic equation with boundary conditions of a special form // Applied Mathematical Modelling. 2013. Vol. 37. – Issues 10-11. P. 6918-6928.

  56. Kazakov A.L. Lempert A.A. Bukharov D.S. On Segmenting Logistical Zones for Servicing Continuously Developed Consumers // Automation and Remote Control. 2013. Vol. 74.– №6. P. 968-977.

  57. Emelyanov I.G. Mironov V.I. Contact problem for a shell considering the transverse load // Journal of Machinery Manufacture and Reliability. 2013. V. 42. Is. 1. P. 36-40.

  58. Kazakov A.L. Lempert A.A. Existence and uniqueness of the solution of the boundary-value problem for a parabolic equation of unsteady filtration // Journal of Applied Mechanics and Technical Physics. 2013. Vol. 54. – № 2. P. 251-258.

  59. Kolmogorov V.L. Johnson W. Reid S.R. Corbett G.G. Impact Loading and Fracture of Solids: a Review and a New Theory. 2012.
    Full text>>

  60. Fedotov V.P. Numerical-Analytical BEM for Elliptic Problems // WSEAS Transactions on Applied and Theoretical Mechanics. 2011. Vol.6. Issue 4.

  61. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluation of the life of a shell construction lying on supports // Journal of Machinery Manufacture and Reliability. 2010. V. 39. Is. 1. P. 83-88.

  62. Volkova T.A. Volkov S.S. Microstructure damage related to stress-strain curve for grain composites // Theoretical and Applied Fracture Mechanics. Elsevier, October, 2009. Volume 52, Issue 2. P. 83-90.

  63. Fedotov V.P. Spevak L.F. One approach to the derivation of exact integration formulae in the boundary element method // Engineering Analysis with Boundary Elements. 2008. V. 32 (10). P. 883–888.

  64. Kolmogorov V.L. Spevak L.F. R.V. Churbayev On the technique used to determine plasticity margin in high-speed deformation under high pressure // International Journal of Mechanical Sciences. 2008. V. 50(4). P. 676–682.

  65. Volkova T.A. Volkov S.S. Microstructure damage related to deformation properties of grain composites // Theoretical and Applied Fracture Mechanics. Elsevier, 2008. Vol. 49, Issue 3. P. 242-250.

  66. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Determining the stress state and the lifetime of a shell structure load // Journal of Machinery Manufacture and Reliability. 2007. V. 36. Is. 5. P. 443-449.

  67. Kolmogorov V.L. Zalazinskiy A.G. Zalazinskaya E.A. The superdeep penetration of a particle into an elastic-plastic medium // International Journal of Impact Engineering. 2007. Volume 34, Issue 11, November. P. 1869-1882.

  68. Solovei V.D. Dragoshanskii Yu.N. Magnetic Anisotropy Constants of a Single Crystal // The Physics of Metals and Metallography. 2007. Vol. 103, No.1. P. 33-38.

  69. Fedotov V.P. Spevak L.F. DumshevaT.D. Zenkova E.S. Privalova V.V. Numerical - analytical method for solving problems of elasticity and heat conductivity // XXXII Summer School – Conference “Advanced Problems in Mechanics”. Book of abstracts. St. Petersburg, 2004. P. 43-44.

  70. Solovei V.D. Kolmogorov V.L. Vershinin S.V. Maximum channel pressure of a nanosecond pulsed anode discharge in a crystal // Journal of Applied Mechanics and Technical Physics. 2002. Vol. 43, No.3. P. 362-364.

  71. Veselov I. Emelyanov I.G. Fedotov V.P. Research of the Tension of the Shell Working in Hydrogen-Containing Environment // Proceedings of the 13th World Hydrogen Energy Conference, Beijing, China, June 12-15. 2000. P. 1041-1045.

  72. Kolmogorov V.L. Gorshkov A.V. Spevak L.F. A method for calculating the stress-strain state in the general boundary value problem of metal forming - part 2. Impact of a bar against a rigid obstacle // International Journal of Solids and Structures. 1999. №36. P. 1263-1275.

  73. Kolmogorov V.L. Fedotov V.P. Gorshkov A.V. Tree-dimensional analysis of the stress-strain state in the process of plastic deformation of metals // Journal of Materials Processing Technology. 1999. 95. P. 55-64.

  74. Solovei V.D. Loginov Yu.N. Calculating radial textures in the bushes made of the alloy Mn-Al-C upon upsetting into a container // Textures and Microstructures. 1999. Vol. 32. P. 235-243.

  75. Kolmogorov V.L. Smirnov S.V. The restoration of the margin of metal plasticity after cold deformation // Journal of Materials Processing Technology. 1998. v. 74. P. 83-88.

  76. Kolmogorov V.L. Zalazinskiy A.G. On metal joining and the prediction of the strength of solid-phase joints // Journal of Materials Processing Technology. 1998. 75. P. 157-164.

  77. Kolmogorov V.L. Smirnov S.V. Healing of metal microdefects after cold deformation // In: Advanced Methods in Ma-terials Processing Defects edited by M. Redeleanu and P. Gilormini. Elsevier Science B.V. 1997. P. 61-69.

  78. Kolmogorov V.L. Fedotov V.P. Spevak L.F. A mathematical model for the formation and development of defects in metals // Studies in Applied Mechanics. №45. Advanced Methods in Materials Processing Defects / Edited by M.Predeleanu and P.Gilormini. Elsevier, 1997. P. 51–60.

  79. Solovei V.D. Loginov Yu.N. Calculating extrusion textures of the alloy // Textures and Microstructures. 1996. Vol.28. P. 121-128.

  80. Solovei V.D. Kolmogorov V.L. Calculating deformation textures for cubic polycrystals // Textures and Microstructures. 1995. Vol.23. P. 37-42.

<< Васк |