Korobov Yury Michael Filippov Makarov A.V. Malyigina I.Yu. Soboleva N.N. Davide Fantozzi Milanti Andrea Heli Koivuluoto and Petri Vuoristo. Arc-Sprayed Fe-Based Coatings from CoredWires for Wear and Corrosion Protection in Power Engineering. 2018. Vol. 8. No. 71. DOI: 10.3390/coatings8020071.
Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Interactive communication between the user and the computer-aided design system of shaft forging on presses. 2018. Vol. 224. 04001. DOI: https://doi.org/10.1051/matecconf/201822404001.
Prosviryakov E.Yu. New Class of Exact Solutions of Navier-Stokes Equations with Exponential Dependence of Velocity on Two Spatial Coordinates. 2018. Vol. 53. No. 1. P. 107-114. DOI: 10.1134/S0040579518060088.
Filippov M.A. Nikiforova S.M. Shveikin V.P. Sharapova V.A. Heat Treatment Forming a Dissipative Metal Base in Wear-Resistant Chromium-Alloyed Cast Iron // AIP Conference Proceedings. 2018. Vol. 2053. – 030016. – https://doi.org/10.1063/1.5084377.
Khalevitskiy Yu.V. Konovalov A.V. A gravitational approach to modeling the representative volume geometry of particle-reinforced metal matrix composites // Engineering with Computers. 2018. https://doi.org/10.1007/s00366-018-0649-8.
Kirillova V. Prosviryakov E.Yu. Diastolic dysfunction of the right ventricle as an early diagnostic marker of heart failure // European Journal of Heart Failure. 2018. Vol. 20 (Suppl. S1). P. 223-224. DOI: 10.1002/ejhf.1197.
Gorshkov A.V. Prosviryakov E.Yu. Ekman Convective Layer Flow of a Viscous Incompressible Fluid // Izvestiya. Atmospheric and Oceanic Physics. 2018. Vol. 54. – No. 2. P. 189–19. DOI: 10.7868/S0003351518020101.
Smirnov A.S. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Belozerov G. A. Konovalov A.V. Vichuzhanin D.I. Muizemnek O.Yu. Effect of Silicon Carbide Particles on the Mechanical and Plastic Properties of the AlMg6/10% SiC Metal Matrix Composite // Journal of Composite Materials. 2018. Vol. 52. Iss. 24. P. 3351–3363. DOI:10.1177/0021998318765622.
Vykhodets V.B. Nefedova O.A. Obukhov S.I. Kurennykh T.E. Danolov S.E. Vykhodets E.V. Application of the Nuclear Reaction Analysis Online Technique to Study the Diffusion of Deuterium in Metals // Journal of Experimental and Theoretical Physics Letters (JETP Letters). 2018. Vol. 107. – No. 4. P. 211-215.
Savrai R.A. Makarov A.V. Osinceva A.L. Malyigina I.Yu. Estimating the Contact Endurance of the AISI 321 Stainless Steel Under Contact Gigacycle Fatigue Tests // Journal of Materials Engineering and Performance. 2018. Vol. 27. Is. 2. P. 601-611.
Konovalov D.A. Veretennikova (Golubkova) I.A. Study on mechanical properties of a bimetallic composite produced by explosion welding under incremental plastic deformation // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 215-219. DOI: 10.22226/2410-3535-2018-2-215-219.
Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Michurov N.S. The laser-welded joint of an austenitic corrosion-resistant steel and a titanium alloy with an intermediate copper insert // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 42-47. DOI: 10.22226/2410-3535-2018-1-42-47.
Vichuzhanin D.I. Yolshina I.A. Muradymo R.V. Nesterenko A.V. A fracture for 1 wt% aluminum-graphene metal matrix composite at 300ºC // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 184-189. DOI: 10.22226/2410-3535-2018-2-184-189.
Vichuzhanin D.I. Smirnov S.V. Nesterenko A.V. Igumnov A.S. A fracture Locus for a 10 Volume-Percent V95/SiC Metal Matrix Composite at the Near-Solidus Temperature // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 88-93. DOI: 10.22226/2410-3535-2018-1-88-93.
Smolyaninov A. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Lapshin V. Survivability of the Locomotive Cabin at Interval Estimation of Obstacle Parameters // MATEC Web of Conferences. 2018. V. 216. 02021. doi.org/10.1051/matecconf/201821602021.
Gorkunov E.S. Application of Magnetoelastic Effects to the Evaluation of Elastic and Plastic Strains in Steel Structural Memebers // Matec Web of Conferences. 2018. V. 145. 05001. DOI: https://doi.org/10.1051/matecconf/201814505001.
Gorkunov E.S. Povolotskaya A.M. Pavel Nosov Zadvorkin S.M. Magnetic Flux Distribution in a Ferromagnetic Material Magnetized by U-Shaped Electromagnets of Different Geometric Dimensions Types // Matec Web of Conferences. 2018. V. 145. 05002. DOI: https://doi.org/10.1051/matecconf/201814505002.
Gorkunov E.S. Zadvorkin S.M. Povolotskaya A.M. Igor Veselov Studying the effect of elastic-plastic strain and hydrogen sulphide on the magnetic behaviour of pipe steels as applied to their testing // Matec Web of Conferences. 2018. V. 145. 05003. DOI: https://doi.org/10.1051/matecconf/201814505003.
Ogorelkov D. A. Mironov V.I. Lukashuk O. Durability of Metal Structures under Quasi-Static Load // MATEC Web of Conferences // MATEC Web of Conferences. 2018. V. 224. 02091. doi.org/10.1051/matecconf/201822402091.
Putilova E. A. Gorkunov E.S. Zadvorkin S.M. Investigation of the Structure, Phase Composition and Physical-Mechanical Characteristics of High-Strength Laminated Materials Which Contain Corrosion-Resistant Steels with High Nitrogen Content // Matec Web of Conferences. 2018. V. 145. 05004. https://doi.org/10.1051/matecconf/201814505004.
Savrai R.A. Makarov A.V. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part II: mechanical properties // Materials Science & Engineering: A. 2018. 734. P. 513-518. https://doi.org/10.1016/j.msea.2018.07.100.
Savrai R.A. Makarov A.V. Malyigina I.Yu. Volkova E.G. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part I: microstructure and surface properties // Materials Science & Engineering: A. 2018. 734. P. 506-512. https://doi.org/10.1016/j.msea.2018.07.099.
Kaigorodova L.I. Rasposienko D.Yu. Pushin V.G. Pilyugin V.P. Smirnov S.V. Influence of Severe Plastic Deformation on the Structure and Properties of Al-Li-Mg-Zr-Sc-Zn Alloy // Physics of Metals and Metallography. 2018. Vol. 119. – No. 2. – P. 161-168. – DOI: 10.1134/S0031918X18020060.
Tabatchikova T.I. Lepikhin S.V. Morozov A.N. Gudnev N.Z. Structure and Mechanical Properties of Steel Welding Joints Produced Using Abrasive Waterjet Cutting // Physics of Metals and Metallography. 2018. Vol. 119. – No. 7. P. 691-699.
Prosviryakov E.Yu. Spevak L.F. Layered Three-Dimensional NonUniform Viscous Incompressible Flows // Theoretical Foundations of Chemical Engineering. 2018. Vol. 52. No. 5. P. 765-770. DOI: 10.1134/S0040579518050391.
Vandyshev A.B. Kulikov V.A. Analysis of the Calculated parameters of a Model Membrane-Catalytic Converter for the Production of High-Purity Hydrogen from Methane. // Chemical and Petroleum Engineering. 2018. Vol. 54. No. 1-2. P. 31-37. DOI: 10.1007/s10556-018-0434-y.
Vandyshev A.B. Kulikov V.A. Modeling a Membrane Reformer with a Carbon-Monoxide Conversion Catalyst for Extracting High-Purity Hydrogen from Methane Steam-Conversion Products // Chemical and Petroleum Engineering. 2018. Vol. 54. Nos. 5-6. P. 313-321. DOI: 10.1007/s10556-018-0481-4.
Berdnikov K.V. Struzhanov V.V. Equilibrium State of a Softening Elastoplastic Medium with an Expanding Spherical Cavity // Journal of Applied Mechanics and Technical Physics. 2018. Vol. 59. Iss. 1. P. 104-111. DOI: 10.1134/S0021894418010133.
Grokhovsky V.I. Gladkovsky S.V. The impact mechanical tests of seymchan and chinga meteorites // Meteoritics & Planetary Science. 2018. Vol. 53. P. 6276-6276.
Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Igumnov A.S. A Numerical Study of Plastic Strain Localization and Fracture in Al/SiC Metal Matrix Composite // Physical Mesomechanics. 2018. Vol. 21. – Iss. 4. – P. 305-313. – DOI: 10.1134/S1029959918040045.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Distribution of Magnetic Flux in a Ferromagnetic Material in the Presence of a Nonferromagnetic Gap in the Composite Circuit // Russian Journal of Nondestructive Testing. 2018. Vol. 54. No. 12. P. 861-870. DOI: 10.1134/S1061830918120069.
Shabashov V.A. Gavrilov N.V. Kozlov K.A. Makarov A.V. Titova S.G. Voronin V.I. Structure of the surface layers of metastable austenitic stainless steel nitrided in electron beam plasma // The Physics of Metals and Metallography. 2018. V. 119. – No. 8. – P. 755-763. – DOI: 10.1134/S0031918X18080124.
Shabashov V.A. Makarov A.V. Kozlov K.A. Sagaradze V.V. Zamatovskii A.E. Volkova E.G. Luchko S.N. Deformation-Induced Dissolution and Precipitation of Nitrides in Austenite and Ferrite of a High-Nitrogen Stainless Steel // The Physics of Metals and Metallography. 2018. V. 119. – No. 2. – P. 196-206. – DOI: 10.1134/S0031918X18020096.
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of Heating on the Structure, Phase Composition and Micromechanical Properties of the Metastable Austenitic Steel Strengthened by Nanostructuring Frictional Treatment // The Physics of Metals and Metallography. 2018. V. 119. – Is. 12. – P. 1196-1203.
Savrai R.A. Resistance of laser-clad chromium–nickel coatings to failure under contact fatigue loading // The Physics of Metals and Metallography. 2018. V. 119. – Is. 10. – P. 1013-1021. – DOI: 10.1134/S001532301810011X.
Privalova V.V. Prosviryakov E.Yu. Couette–Hiemenz exact solutions for the steady creeping convective flow of a viscous incompressible fluid, with allowance made for heat recovery // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 3. P. 532-548. DOI: 10.14498/vsgtu1638. VAC list
Prosviryakov E.Yu. Dynamic equilibria of a nonisothermal fluid // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 4. DOI: 10.14498/vsgtu1651. VAC list
Skorynina P.A. Makarov A.V. Volkova E.G. Osinceva A.L. Increasing the Micromechanical and Tribological Characteristics of an Austenitic Steel by Surface Deformation Processing. 2018. Vol. 2053. 030064. https://doi.org/10.1063/1.5084425.
Loginov Yu.N. Babaylov N.A. Polyansky L.I. Pervukhina D.N. Briquette Compacting in Container with a Small Taper Angle // AIP Conference Proceedings. 2018. Vol. 2053. – 040053. – https://doi.org/10.1063/1.5084491.
Lezhnin N.V. Makarov A.V. Gavrilov N.V. Osinceva A.L. Savrai R.A. Improving the Scratch Test Properties of Plasma-Nitrided Stainless Austenitic Steel by Preliminary Nanostructuring Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 040050. – https://doi.org/10.1063/1.5084488.
Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Analysis of the Stress-Strain State of a Tool during Hydromechanical Extrusion // AIP Conference Proceedings. 2018. Vol. 2053. 040001. https://doi.org/10.1063/1.5084439.
Burmasheva N.V. Prosviryakov E.Yu. Investigation of a Velocity Field for the Marangoni Shear Convection of a Vertically Swirling Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. – 040011. – https://doi.org/10.1063/1.5084449.
Burmasheva N.V. Prosviryakov E.Yu. Investigation of Temperature and Pressure Fields for the Marangoni Shear Convection of a Vertically Swirling Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. – 040012. – https://doi.org/10.1063/1.5084450.
Emelyanov I.G. Mironov V.I. A Method for Estimating the Hydrogenation of a Shell with Variable Geometrical and Physical-Mechanical Parameters // AIP Conference Proceedings. 2018. Vol. 2053. 030012. https://doi.org/10.1063/1.5084373.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Durability of a Locomotive Cab at a Railway Crossing Calculated with the Estimation of the Obstacle Parameters // AIP Conference Proceedings. 2018. Vol. 2053. – 040018. – https://doi.org/10.1063/1.5084456.
Gladkovsky S.V. Kamantsev I.S. Petrova (Kuteneva) S.V. Dvoynikov D.A. Kuznetsov A.V. Layered Metal Composites with High Resistance to Brittle Fracture at Low Temperatures // AIP Conference Proceedings. 2018. Vol. 2053. 020003. https://doi.org/10.1063/1.5084349.
Gladkovsky S.V. Petrova (Kuteneva) S.V. Dvoynikov D.A. Veselova V.E. Parametrization of Powder for Al/B4C Metal Matrix Composites Using the Static Image Analysis Method // AIP Conference Proceedings. 2018. Vol. 2053. – 040026. – https://doi.org/10.1063/1.5084464.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Magnetic Flux Distribution in a Ferromagnetic Material with the Variation of the Magnetizer Dimensions and the Nonferromagnetic Gap Value // AIP Conference Proceedings. 2018. Vol. 2053. 020004. https://doi.org/10.1063/1.5084350.
Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Correlation of Residual Stresses with Magnetic Properties of Armco Iron // AIP Conference Proceedings. 2018. Vol. 2053. – 030022. – https://doi.org/10.1063/1.5084383.
Gorshkov A.V. Prosviryakov E.Yu. Isobaric Vortex Flow of a Viscous Incompressible Fluid with the Navier Boundary Condition // AIP Conference Proceedings. 2018. Vol. 2053. – 040030. – https://doi.org/10.1063/1.5084468.
Gorshkov A.V. Prosviryakov E.Yu. Large-Scale Convection Flow of an Incompressible Fluid on a Rotating Inclined Plane // AIP Conference Proceedings. 2018. Vol. 2053. – 040029. – https://doi.org/10.1063/1.5084467.
Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Checking of Subjective Decisions Obtained by Computer-Aided Design of Forgings // AIP Conference Proceedings. 2018. Vol. 2053. – 040040. – https://doi.org/10.1063/1.5084478.
Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Ontology of the Input Language for Computer-Aided Design of Shaft Forging on Presses // AIP Conference Proceedings. 2018. Vol. 2053. – 040039. – https://doi.org/10.1063/1.5084477.
Kazakov A.L. Kuznetsov P.A. Spevak L.F. A Heat Wave Problem for a Degenerate Nonlinear Parabolic Equation with a Specified Source Function // AIP Conference Proceedings. 2018. Vol. 2053. – 030024. – https://doi.org/10.1063/1.5084385.
Khalevitskiy Yu.V. Konovalov A.V. Partin A.S. On Convergence of Various Iterative Linear Solvers in Heterophase Elastoplastic Media Deformation Models // AIP Conference Proceedings. 2018. Vol. 2053. 030026. https://doi.org/10.1063/1.5084387.
Khudorozhkova Yu.V. Cheremicina E.R. The Effect of a Dispersed Grain Structure of Hypoeutectoid, Eutectoid and Hypereutectoid Carbon Steels on Their Magnetic Behavior // AIP Conference Proceedings. 2018. Vol. 2053. 040042. https://doi.org/10.1063/1.5084480.
Kuznetsov A.V. Drukarenko N.A. Kamantsev I.S. Mironov V.I. Experimental Evaluation of Crack Growth Modeling Results in a Gray Pig Iron Plate // AIP Conference Proceedings. 2018. Vol. 2053. 030033. https://doi.org/10.1063/1.5084394.
Makarov A.V. Savrai R.A. Malyigina I.Yu. Volkova E.G. Burov S.V. Nanostructuring and Surface Hardening of Structural Steels by Ultrasonic Impact-Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 020006. – https://doi.org/10.1063/1.5084352.
Makarov A.V. Soboleva N.N. Gibzun M.S. Malyigina I.Yu. Korobov Yu.S. Increasing the Resistance of a NiCrBSi Coating to Heat Wear by Means of Combined Laser Heat Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 030037. – https://doi.org/10.1063/1.5084398.
Michurov N.S. Pugacheva (Vandysheva) N.B. Veretennikova (Golubkova) I.A. Khalevitskiy Yu.V. Smirnova (Yekzemplyarova) E.O. Igumnov A.S. Contribution of Intermetallics to the Formation of the Stress-Strain State of Tensile Welds on the AISI 321 Steel and the Grade 2 Titanium Alloy with a Copper Insert // AIP Conference Proceedings. 2018. Vol. 2053. – 040058. – https://doi.org/10.1063.
Mironov V.I. Ogorelkov D. A. Yakovlev V.V. Influence of Structural Damping on the Durability of a Crane Metal Construction // AIP Conference Proceedings. 2018. Vol. 2053. – 040060. – https://doi.org/10.1063/1.5084498.
Polyakov A.P. A Model of the Dynamic Powder Compaction Process // AIP Conference Proceedings. 2018. Vol. 2053. 040073. https://doi.org/10.1063/1.5084511.
Polyakov P.A. Mushnikov A.N. Polyakov A.P. Magnetic Properties of Iron-Based Vanadium-Containing Powder Composites Blended with Zn, Cu, P, and C // AIP Conference Proceedings. 2018. Vol. 2053. 040075. https://doi.org/10.1063/1.5084513.
Polyakov P.A. Polyakov A.P. Studying the Hardness and Plasticity of Iron-Based Powder Compositions by Microindentation // AIP Conference Proceedings. 2018. Vol. 2053. 040074. https://doi.org/10.1063/1.5084512.
Privalova V.V. Prosviryakov E.Yu. Exact Solutions for Three-Dimensional Nonlinear Flows of a Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. – 040077. – https://doi.org/10.1063/1.5084515.
Privalova V.V. Prosviryakov E.Yu. Linear Heating of the Upper Boundary of a Fluid Layer in the Case of Stationary Nonisothermal Couette Flow // AIP Conference Proceedings. 2018. Vol. 2053. – 040078. – https://doi.org/10.1063/1.5084516.
Prosviryakov E.Yu. A New Exact Solution for Convective Flows of a Rotating Viscous Incompressible Fluid // AIP Conference Proceedings. 2018. Vol. 2053. 020012. https://doi.org/10.1063/1.5084358.
Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Malyigina I.Yu. Trushina E.B. Formation of the Structure of Fe-Ni-Ti-C-B Composites Under Self-Propagating High-Temperature Synthesis // AIP Conference Proceedings. 2018. Vol. 2053. 020013. https://doi.org/10.1063/1.5084359.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. Studying the Structure and Micromechanical Properties of a Hardfaced Wear-Resistant Coating // AIP Conference Proceedings. 2018. Vol. 2053. 040079. https://doi.org/10.1063/1.5084517.
Pugacheva (Vandysheva) N.B. Michurov N.S. Vichuzhanin D.I. Contribution of low-melting eutectics to the plastic deformation of aluminum matrix composites // AIP Conference Proceedings. 2018. Vol. 2051. 020247. https://doi.org/10.1063/1.5083490.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. The Diagnostics of the Influence of Elasto-Plastic Deformation on the Structure and Physical-Mechanical Properties of the High Strength Laminated Materials Used in Severe Arctic Conditions // AIP Conference Proceedings. 2018. Vol. 2051. 020248. https://doi.org/10.1063/1.5083491.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Veselov I.N. Pyshmintsev I.Y. Investigation of Structure and Properties of the Perspective High-Strength Low Alloy Steel for the Oil Country Tubular Goods Operated for Extreme Climatic Conditions // AIP Conference Proceedings. 2018. Vol. 2051. 020249. https://doi.org/10.1063/1.5083492.
Savrai R.A. Davydova (Pozdejeva) N.A. Makarov A.V. Malyigina I.Yu. Effect of Frictional Treatment on the Microstructure and Surface Properties of Low-Carbon Steel // AIP Conference Proceedings. 2018. Vol. 2053. – 040087. – https://doi.org/10.1063/1.5084525.
Savrai R.A. Makarov A.V. Analytical and Experimental Assessment of Ultimate Tensile Strength of a Hardened Layer on a Material Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030060. – https://doi.org/10.1063/1.5084421.
Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.
Smirnov A.S. Khalevitskiy Yu.V. Myasnikova M.V. Simulating the Deformation Process of AlMg6/10%SiCp Composite Representative Volume under Macroscopic Uniaxial Strain // AIP Conference Proceedings. 2018. Vol. 2053. 030065. https://doi.org/10.1063/1.5084426.
Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Kopeina A.V. A Fracture Locus for an Aluminum-Based Metal Matrix Composite at 450°С // AIP Conference Proceedings. 2018. Vol. 2053. – 020014. – https://doi.org/10.1063/1.5084360.
Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Smirnov S.V. Pestov A.V. Konovalov D.A. Adhesive Characteristics of Epoxy Glue in Relation to the Microgeometry of the Substrate Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030066. – https://doi.org/10.1063/1.5084427.
Solovei V.D. Construction of Velocity Disturbances for a Special Stationary Flow of a Viscoplastic Strip under Rolling // AIP Conference Proceedings. 2018. Vol. 2053. – 030069. – https://doi.org/10.1063/1.5084430.
Spevak L.F. Nefedova O.A. Parallel Technology for Solving the Poisson Equation in Axisymmetric Domains by the Boundary Element Method // AIP Conference Proceedings. 2018. Vol. 2053. – 030070. – https://doi.org/10.1063/1.5084431.
Struzhanov V.V. Korkin A.V. Reconstruction of a Tensile Diagram with a Falling Branch from a Pure Bending Diagram // AIP Conference Proceedings. 2018. Vol. 2053. – 030071. – https://doi.org/10.1063/1.5084432.
Volkov S.S. Struzhanov V.V. Critical Microfracture and the Safety Factor in Deformation of Structurally Heterogeneous Materials // AIP Conference Proceedings. 2018. Vol. 2053. – 040102. – https://doi.org/10.1063/1.5084540.
Vladimirov A.P. Drukarenko N.A. Kamantsev I.S. Trishin V.N. Lookin N.A. Real-time study of high-cycle fatigue damage using the averaged speckle dynamics // IOP Conf. Series: Journal of Physics: Conf. Series. 2018. Vol. 1149. 012013. DOI:10.1088/1742-6596/1149/1/012013.
Soboleva N.N. Makarov A.V. Malyigina I.Yu. NiCrBSi coating obtained by laser cladding and subsequent deformation processing // IOP Conf. Series: Journal of Physics: Conference Series. 2018. Vol. 946. 013004.
Sergeev S.N. Safarov I.M. Galeyev R.M. Gladkovsky S.V. Dvoynikov D.A. Rogozhkin S.V. Iskandarov А.А. Korznikova G.F. Analysis of the Distribution of Alloying Elements in Ultrafine-Grained Steel 05G2MFBT by Atom-Probe Tomography // IOP Conference Series: Materials Science and Engineering. 2018. Vol. 447. 012009. doi:10.1088/1757-899X/447/1/012009.
Abdulov Sergei Trusevich Ilya Volkov A.A. Ensuring the amphibious capabilities of the amphibious vehicle based on the hydrodynamic buoyancy principle // MATEC Web of Conferences. 2018. Vol. 224. 02030. https://doi.org/10.1051/matecconf/201822402030.
Abdulov Sergey Taratorkin A.I. Nenashev Pavel Dynamic loading of a water jet propulsion drive of amphibious vehicles // MATEC Web of Conferences. 2018. Vol. 224 02042 https://doi.org/10.1051/matecconf/201822402042..
Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Stability of the dynamic shifting process in the vehicle transmission with the input shaper // MATEC Web of Conferences. 2018. Vol. 211 02007 https://doi.org/10.1051/matecconf/201821102007.
Taratorkin I.A. Derzhanskii Victor Taratorkin A.I. Oscillation damping in the power unit when starting the engine equipped with the Common Rail system // MATEC Web of Conferences. 2018. Vol. 224. 02037. https://doi.org/10.1051/matecconf/201822402037.
Taratorkin I.A. Derzhanskii Victor Volkov A.A. Stabilization of transport tracked vehicle trajectory // MATEC Web of Conferences. 2018. Vol. 224. 02038. https://doi.org/10.1051/matecconf/201822402038.
Saraev Yu.N. Gladkovsky S.V. Lepikhin S.V. Kamantsev I.S. Lunev A.G. Perovskaya. Investigation of the influence of energy parameter of the covered-electrode welding on the impact strength characteristics and cracking resistance of the welded joints obtained // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science.. 2018. Vol. 20. No. 2. P. 100-115. DOI: 10.17212/1994-6309-2018-20.2-100-115.
Lenivtseva O. Tokarev A. Chakin I. Burov S.V. Khudorozhkova Yu.V. Surface Hardening of Commercially Pure Titanium by Non-vacuum Electron Beam Cladding of Powder Mixtures // Obrabotka metallov - Metal Working and Material Science. 2018. Vol. 20. Iss. 2. P. 116-129. DOI: 10.17212/1994-6309-2018-20.2-116-129.
Vladimirov A.P. Mikhailova Yu.A. Drukarenko N.A. Dynamic speckle interferometry of technical and thin biological objects // Proceedings of SPIE. 2018. Vol. 10834. Speckle 2018: VII International Conference on Speckle Metrology, 1083427. DOI: 10.1117/12.2319729.
Privalova V.V. Prosviryakov E.Yu. Couette–Hiemenz exact solutions for the steady creeping convective flow of a viscous incompressible fluid, with allowance made for heat recovery // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 3. P. 532-548. DOI: 10.14498/vsgtu1638.
Struzhanov V.V. Korkin A.V. Chaykin A.E. One approach to determination of the ultimate load-bearing capacity of mechanical systems with softening elements // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 4. P. 1-12. DOI: 10.14498/vsgtu1624.
Taratorkin A.I. Taratorkin I.A. Derzhanskiy V.B. Alexander V. Oscillation elimination method in transient processes of controlling the transport vehicle transmission // In Proc. of the 37th FISITA World Automotive Congress 2018. Код 142293. – 2-s2.0-85057971568.
Saraev Y.N. Gladkovsky S.V. Lunev A.G. Perovskaya M.V. Semenchuk V.M. Features of Formation of Structure and Physical and Mechanical Properties of Permanent Welded Joints of Low-Alloy Steels by Methods of Adaptive Pulse Control of Energy Parameters of Welding Mode // Materials Science Forum. 2018. Vol. 938. P. 124-131. DOI: 10.4028/www.scientific.net/MSF.938.124.
Rekov A.M. Vichuzhanin D.I. The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 53-60. DOI: 10.15593/perm.mech/2018.3.06.
Emelyanov I.G. Mironov V.I. A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 27-35. DOI: 10.15593/perm.mech/2018.3.03.
Konovalov A.V. Kozlov A.V. Konovalov D.A. Partin A.S. Features of Stress-Strain State of Thin-Walled Circular Single-Edge-Notch Specimen under Eccentric Tension // PNRPU Mechanics Bulletin. 2018. No. 3. P. 44-52. DOI: 10.15593/perm.mech/2018.3.05.
Smirnov S.V. Kruchkov D.I. Nesterenko A.V. Berezin I.M. Vichuzhanin D.I. Experimental study of short-term transient creep of the Al/SiC metal-matrix composite under uniaxial compression // PNRPU Mechanics Bulletin. 2018. No. 4. DOI: 10.15593/perm.mech/2018.4.09.
Struzhanov V.V. Vichuzhanin D.I. A Method for Converting an Experimental Torsion Diagram for a Cylindrical Specimen to the Stress-Strain Diagram of the Material // PNRPU Mechanics Bulletin. 2018. No. 2. P. 107-113. DOI: 10.15593/perm.mech/2018.2.10.
Vichuzhanin D.I. Yolshina L.A. Smirnov A.S. Muradymov R.V. A Fracture Locus for a 2 Wt % Aluminum-Graphene Metal Matrix Composite at 300° C // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 17-26. DOI: 10.15593/perm.mech/2018.3.02.
Vladimirov A.P. Ponosov Yu.S. Application of speckle dynamics and Raman light scattering to study the fracture features of pipe steel at high-cycle fatigue // PNRPU Mechanics Bulletin. 2018. No. 3. P. 138-146. DOI: 10.15593/perm.mech/2018.3.13.
Privalova V.V. Prosviryakov E.Yu. Steady convective Coutte flow for quadratic heating of the lower boundary fluid layer // Rus. J. Nonlin. Dyn. 2018. Vol. 14. No. 1. P. 69-79.
Gladkovsky S.V. Potapov A.I. Salikhyanov D.R. Rheological Properties and Substantiation of Hot Rolling Regimes of Low- and Medium Carbon Structural Steels // Solid State Phenomena. 2018. Vol. 284. P. 653-661. DOI:10.4028/www.scientific.net/SSP.284.653.
Shveikin V.P. Thermomechanical Hardening of Steels // Solid State Phenomena. 2018. Vol. 284. P. 507-512. https://doi.org/10.4028/www.scientific.net/SSP.284.507.
Brusentseva T.A. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Stydying the Influence of the Nature of the Filler on the Mechanical Properties of the Der-330 Epoxy Resin [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 27-36. DOI: 10.17804/2410-9908.2018.6.027-036.
Druzhinin A.V. Vladimirov A.P. Tsvetkova E.V. Teoretical Bases of Magnetooptical Refractometry for Transparent Media [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 83-89. DOI: 10.17804/2410-9908.2018.6.083-089.
Emelyanov I.G. Mechanics of Shells and Its Applications [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 6-28. DOI: 10.17804/2410-9908.2018.2.006-028.
Kazakov A.L. Spevak L.F. Nefedova O.A. On the Numerical-Analytical Approaches to Solving a Nonlinear Heat Conduction Equation with a Singularity [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 100-116. DOI: 10.17804/2410-9908.2018.6.100-116.
Muizemnek O.Yu. Konovalov A.V. Kanyukov S.I. Computer-Aided Intersubjective Assignment of Overlaps for Shaft-Type Forgings [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 14-23. DOI: 10.17804/2410-9908.2018.3.014-023.
Nefedova O.A. Vykhodets V.B. A Procedure for Online Investigation of Deuterium Diffusion in Materials [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 57-63. DOI: 10.17804/2410-9908.2018.5.057-063.
Nefedova O.A. Vykhodets V.B. Kurennykh T.E. A Procedure for Studying the Effect of Radiation Defects on the Diffusion Coefficients of Deuterium in Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 64-73. DOI: 10.17804/2410-9908.2018.5.064-073.
Polyakov A.P. Dynamic Powder Compaction Processes [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 42-82. DOI: 10.17804/2410-9908.2018.2.042-082.
Privalova V.V. Prosviryakov E.Yu. Exact Solutions for a Couette–Hiemenz Creeping Convective Flow with Linear Temperature Distribution on the Upper Boundary [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 92-109. DOI: 10.17804/2410-9908.2018.2.092-109.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Mushnikov A.N. Studying the Effect of Plastic Deformation on the Mechanical and Magnetic Characteristics of High-Strength Bimetal Materials Intended for Use in the Arctic Climate [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. ss. 6. P. 136-14. DOI: 10.17804/2410-9908.2018.6.136-148.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
Smirnov S.V. Khotinov V.A. Vichuzhanin D.I. Polukhina O.N. Farber V.M. The Digital Image Correlation Method Applied to Studyingthe Plastic Flowof the 08g2bmsteel under Tension [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 6-13. DOI: 10.17804/2410-9908.2018.3.006-013.
Smirnov S.V. Konovalov D.A. Kalashnikov S.T. Smirnova (Yekzemplyarova) E.O. Studying the Adhesion Strength and Mechanical Properties of Coatings on Aluminum-Magnesium Alloy Samples [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 106-115. DOI: 10.17804/2410-9908.2018.5.106-115.
Solovei V.D. A Variational Principle for the Disturbances of Particle Velocities in the Flow of a Perfectly Plastic Strip under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 83-91. DOI: 10.17804/2410-9908.2018.2.083-091.
Zadvorkin S.M. Shveikin V.P. Kalashnikov S.T. Antenorova N.P. On the Applicability of Electromagnetic Testing Methods to Detecting Discontinuities in Steel Structures Intended for Operation in Aggressive Media Under Extreme Loads // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 8-17. DOI: 10.17804/2410-9908.2018.6.008-017.
Zalazinskiy A.G. Kruchkov D.I. Titov V.G. Application of the Pareto Criterion to Selecting the Optimal Composition of the Charge Material for the Manufacture of a Composite Blank [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 33-42. DOI: 10.17804/2410-9908.2018.3.033-042.
Kazakov A.L. Kuznetsov P.A. Spevak L.F. On a Three-Dimensional Heat Wave Generated by Boundary Condition Specified on a Time-Dependent Manifold // Izvestiya Irkutskogo gosudarstvennogo universiteta. Seriya: Matematika. 2018. Vol. 26. P. 16-33.
Kruchkov D.I. Zalazinskiy A.G. Romanova O.V. Nesterenko A.V. Smirnova (Yekzemplyarova) E.O. Determination of parameters for the plasticity model of VT-22 alloy powder particles // Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional'nye pokrytiya. 2018. No. 2. P. 4-12. DOI: 10.17073/1997-308X-2018-2-4-12.
Rozhkova E.A. Gorshkov A.V. Prosviryakov E.Yu. Layered Marangoni Convection during Heat Transfer According to the Newton’s Law of Cooling. Part 1. Investigation of the Velocity Field // Khimicheskaya fizika i mezoskopiya. 2018. Vol. 20. No. 1. P. 15-27. DOI:10.20537/nd1801007.
Polyakov P.A. Polyakov A.P. Influence of Small Additives on Extrusion of Workpieces from Powder Composites based on Iron // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2018. No. 7. P. 28-34.
Guryanov G.N. Smirnov S.V. Problemy chernoi metallurgii i materialovedeniya Influence of the contact friction on the stressed state and allowable stress of backward pullin the course // Problemy chernoi metallurgii i materialovedeniya. 2018. No. 1. P. 5-14.
Guryanov G.N. Smirnov S.V. Drawing conditions of round solid profile without axial stress increment because of back tension action // Technologiya metallov. 2018. No. 9. P. 3-12. DOI: 10.31044/1684-2499-2018-9-3-12.
Guryanov G.N. Smirnov S.V. Influence of curve shape of strain hardening on drawing stress and safety factor of round solid profile // Technologiya metallov. 2018. No. 2. P. 13-24.
Guryanov G.N. Smirnov S.V. On development of energy-saving conditions of solid round profile drawing // Technologiya metallov. 2018. No. 7. P. 9-20. DOI: 10.31044/1684-2499-2018-7-9-20.
Guryanov G.N. Smirnov S.V. Influence of the intensitivity of simple strength and size of the work confusion of fiber on axial voltage, stability of strength and growth of medium temperature in the drawing line of wire // Uprochnyayushchie tekhnologii i pokrytiya. 2018. Vol. 14. No. 3 (159). P. 99-106.
Churbaev R.V. Fedotov V.P. Cheremicina E.R. High ductility of magnesium at different styrain rates under pressure // Voprosy materialovedeniya. 2018. No. 1. P. 27-34.
Churbaev R.V. Vichuzhanin D.I. A Device for Measuring the Torque upon Loading the Substance by the method of P.W. Bridgman // Zavodskaya laboratoriya. Diagnostika materialov. 2018. Vol. 84. No. 4. P. 66-70. DOI: 10.26896/1028-6861-2018-84-4-66-70.
Mushnikov A.N. Kryucheva K. Modeling of Magnetic Hysteresis under Weak Magnetic Fields and Triaxial Stress State // International Scientific Journal “Mathematical Modeling”. 2018. Year II. – Issue 3. P. 102-104.
Konovalov D.A. Veretennikova (Golubkova) I.A. STUDY ON MECHANICAL PROPERTIES OF A BIMETALLIC COMPOSITE PRODUCED BY EXPLOSION WELDING UNDER INCREMENTAL PLASTIC DEFORMATION Письма о материалах . DOI: 10.22226/2410-3535-2018-2-215-219. 2018. Vol. 8. № 2 (30). P. 215-219.
