Salikhyanov D.R. Veselova V.E. Volkov V. Flow Behavior and Microstructure Evolution of Ti-6Al-4V Titanium Alloy Produced by Selective Laser Melting Compared to Wrought // International Journal of Advanced Manufacturing Technology. 2021. https://doi.org/10.1007/s00170-021-08000-7.
Savrai R.A. Kogan L.Kh. Eddy current testing of fatigue degradation of metastable austenitic steel under gigacycle contact-fatigue loading // Russian Journal of Nondestructive Testing. 2021. V. 57. No. 5. P. 393-400. DOI: 10.1134/S1061830921050119.
Mironov V.I. Emelyanov I.G. Lukashuk O.A. Criteria of material failure in relation to hydrogen saturation // Solid State Phenomena. 2021. Vol. 316 SSP. P. 484-489. 2-s2.0-85106165052&origin=inward&txGid=7f9ba3c5bd161f4e44bc73789203a5c9. DOI: 10.4028/www.scientific.net/SSP.316.484.
Burmasheva N.V. Prosviryakov E.Yu. Exact solutions to the Navier–Stokes equations describing stratified fluid flows // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2021. Vol. 25. Iss. 3. P. 491-507. DOI: https://doi.org/10.14498/vsgtu1860.
Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. A Couette-Type Flow with a Perfect Slip Condition on a Solid Surface // Vestnik Tomskogo gosudarstvennogo universiteta, Matematika i mekhanika [Tomsk State University Journal of Mathematics and Mechanics]. 2021. Iss. 74. P. 79-94. DOI 10.17223/19988621/74/9.
Prosviryakov E.Yu. Recovery of radial-axial velocity in axisymmetric swirling flows of a viscous incompressible fluid in the Lagrangian consideration of vorticity evolution // VESTNIK UDMURTSKOGO UNIVERSITETA-MATEMATIKA MEKHANIKA KOMPYUTERNYE NAUKI. 2021. Vol. 31. Iss. 3. P. 505-516. DOI: 10.35634/vm210311.
Byval’tsev S. V. Experiment planning subsystem for intellectual system of improvement of pressure processing processes // AIP Conference Proceedings. 2021. Vol. 2402. 070017. https://doi.org/10.1063/5.0071581.
Byval’tsev S. V. Iskritskiy A.I. Augmented Reality on the Internet of Things // AIP Conference Proceedings. 2021. Vol. 2402. 050009. https://doi.org/10.1063/5.0071579.
Smirnov A.S. Smirnova (Yekzemplyarova) E.O. Konovalov A.V. Kanakin V.S. Using the Instrumented Indentation Technique to Determine Damage in Sintered Metal Matrix Composites after High-Temperature Deformation // Applied Sciences-Basel. 2021. Vol. 11. Iss. 22. 10590. https://doi.org/10.3390/app112210590.
Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions to the Oberbeck–Boussinesq Equations for Shear Flows of a Viscous Binary Fluid with Allowance Made for the Soret Effect // BULLETIN OF IRKUTSK STATE UNIVERSITY-SERIES MATHEMATICS. 2021. Vol. 37. P. 17-30. https://doi.org/10.26516/1997-7670.2021.37.17.
Ershkov S.V. Prosviryakov E.Yu. Burmasheva N.V. Christianto Victor Towards understanding the algorithms for solving the Navier–Stokes equations // Fluid Dynamics Research. 2021. Vol. 53. 044501. https://doi.org/10.1088/1873-7005/ac10f0.
Illarionov A.G. Vodolazskiy F.V. Barannikova N.A. Kosmatskiy Ya.I. Khudorozhkova Yu.V. Khudorozhkova. Influence of phase composition on thermal expansion of Ti-0.4Al, Ti-2.2Al-2.5Zr and Ti-3Al-2.5V alloys // Journal of Alloys and Compounds. 2021. Vol. 857. 158049. – https://doi.org/10.1016/j.jallcom.2020.158049.
Zadvorkin S.M. Goruleva L.S. Evaluation of Residual Stresses in Steel Products Using Magnetic Methods // Journal of Machinery Manufacture and Reliability. 2021. No. 2. P. 118-132. DOI: 10.3103/S1052618821020151.
Menshakov A.I. Bruhanova Yu.A. Surkov Yu.S. Skorynina P.A. Investigation of the plasma composition of a discharge with a self-heating hollow cathode and an active anode in a gas mixture with titanium and hexamethyldisilazane vapors // Journal of Physics: Conference Series. 2021. V. 2064. 012046. doi: 10.1088/1742-6596/2064/1/012046.
Menshakov A.I. Bruhanova Yu.A. Skorynina P.A. Obtaining of TiSiCN coatings by anodic evaporation of titanium and decomposition of hexamethyldisilazane in a low-pressure arc discharge // Journal of Physics: Conference Series. 2021. V. 1954. 012032. doi: 10.1088/1742-6596/1954/1/012032.
Saraev Yu.N. Kamantsev I.S. Grigoryeva A.A. Kuznetsov A.V. Nepomnyashchiy A.S. Finding ways to improve the performance of welded joints based on controlled heat input and use of shock-mechanical treatment // Journal of Physics: Conference Series. 2021. Vol. 1791. 012118. doi: 10.1088/1742-6596/1791/1/012118.
Lezhnin N.V. Makarov A.V. Kuznetsov V.P. Vladimirov A.B. Skorynina P.A. Sirosh V.A Adhesion strength of Ti1-xCx – DLC multilayer nanocomposite thin films coated by ion-plasma deposition on martensitic stainless steel produced by selective laser melting followed by plasma-nitriding and burnishing // Journal of Physics: Conference Series. 2021. V. 2064. – 012082. doi: 10.1088/1742-6596/2064/1/012082.
Kazakov A.L. Lempert A.A. Spevak L.F. On an exact solution to the nonlinear heat equation with a source // Journal of Physics: Conference Series. 2021. Vol. 1847. 012006. doi:10.1088/1742-6596/1847/1/012006.
Makarov A.V. Kuznetsov V.P. Skorynina P.A. Sirosh V.A. Vladimirov A.B. Lezhnin N.V. Kolmakov S.V. Plasma nitriding in complex post-processing of stainless steel parts obtained by additive laser technology // Journal of Physics: Conference Series. 2021. V. 2064. 012075. doi: 10.1088/1742-6596/2064/1/012075.
Ogorelkov D. A. Lukashuk O.A. Forecasting the life of a structure relative to the operating mode // Journal of Physics: Conference Series.. 2021. V. 2094. 042061. doi: 10.1088/1742-6596/2094/4/042061.
Petrova (Kuteneva) S.V. Gladkovsky S.V. Vichuzhanin D.I. Nedzvetsky P.D. Brittle fracture resistance and damping properties of layered metal-polymer composites // Letters on Materials. 2021. Vol. 11. Iss. 3. P. 279-284. DOI: https://doi.org/10.22226/2410-3535-2021-3-279-284.
Savrai R.A. Osinceva A.L. Effect of hardened surface layer obtained by frictional treatment on the contact endurance of the AISI 321 stainless steel under contact gigacycle fatigue tests // Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 2021. Vol. 802. – Art. 140679. P. 1-10. DOI: 10.1016/j.msea.2020.140679.
Mironov V.I. Lukashuk O.A. Ogorelkov D. A. On Durability of Structurally Inhomogeneous Materials // Materials Science Forum. 2021. Vol. 1031. P. 24-30. doi:10.4028/www.scientific.net/MSF.1031.24.
Byval’tsev S. V. Damage modeling during hydromechanical extrusion // Materials Today: Proceedings. 2021. Vol. 38. Part 4. P. 2035-2037. https://doi.org/10.1016/j.matpr.2020.10.039.
Filippov M.A. Sharapova V.A. Shveikin V.P. Nikiforova S.M. Heat treatment effect on ledeburite alloys wear resistance // Materials Today: Proceedings. 2021. Vol. 38. Part 4. P. 1810-1812. https://doi.org/10.1016/j.matpr.2020.08.417.
Dvoynikov D.A. Gladkovsky S.V. Multi-Criteria Selection of Quantitative Composition of Alloying Elements of Maraging Steels of the Fe–Cr–Ni–Mo System with an Improved Set of Mechanical Properties // Metallurgist. 2021. Vol. 65. Nos. 5-6. P. 522-528. DOI: 10.1007/s11015-021-01186-x.
Sergeev S.N. Safarov I.M. Zhilyaev A.P. Galeev R.M. Gladkovsky S.V. Dvoynikov D.A. Effect of Deformation-Thermal Processing on the Microstructure and Mechanical Properties of Low-Carbon Structural Steel // Physics of Metals and Metallography. 2021. Vol. 122. No. 6. P. 621-627. DOI: 10.1134/S0031918X21060090.
Kruchkov D.I. Smirnov S.V. Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Bykova (Gurchenko) T.M. Influence of All-Round Forging under Short-Term Creep Conditions on the Structure and Mechanical Properties of the Al7075/10SiCp Composite with an Aluminum Matrix // Physics of Metals and Metallography. 2021. Vol. 122. No. 10. P. 981-990. DOI: 10.1134/S0031918X21100069.
Pugacheva (Vandysheva) N.B. Kruchkov D.I. Nesterenko A.V. Smirnov S.V. Shveikin V.P. Studying the Short-Term High-Temperature Creep in the Al–6Zn–2.5Mg–2Cu/10SiCp Aluminum Matrix Composite // Physics of Metals and Metallography. 2021. Vol. 122. No. 8. P. 782-788. DOI: 10.1134/S0031918X21080111.
Putilova E. A. Zadvorkin S.M. Veselov I.N. Pyshmintsev I.Yu. A Study of the Structure and Physicomechanical Properties of Promising High-Strength Economically Alloyed Steel for Oil and Gas Production Pipes Operating under Extreme Conditions // Physics of Metals and Metallography. 2021. Vol. 122. No. 9. P. 923-930. DOI: 10.1134/S0031918X21090118.
Savrai R.A. Kolobyilin Yu.M. Volkova E.G. Micromechanical characteristics of the surface layer of metastable austenitic steel after frictional treatment // Physics of Metals and Metallography. 2021. V. 122. No. 8. P. 800-806. DOI: 10.1134/S0031918X21080123.
Smirnov A.S. Khudorozhkova Yu.V. Konovalov A.V. Degradation of the Mechanical Properties of Fiberglass Under Discontinuous High-Temperature Loading // Procedia Structural Integrity. 2021. Vol. 32. P. 321-325. DOI: 10.1016/j.prostr.2021.09.046.
Smirnov S.V. Konovalov D.A. Veretennikova (Golubkova) I.A. Pestov Aleksander Adhesive Strength of an Epoxy-Based Adhesive Joint Under a Complex Stress State // Procedia Structural Integrity. 2021. Vol. 33. P. 259-264. DOI: 10.1016/j.prostr.2021.10.032.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. The Effect of Cyclic Preloading on the Magnetic Behavior of the Hot-Rolled 08G2B Steel Under Elastic Uniaxial Tension // Research in Nondestructive Evaluation. 2021. Vol. 32. No. 6. P. 276-294. DOI: 10.1080/09349847.2021.2002487.
Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions for Steady Convective Layered Flows with a Spatial Acceleration // Russian Mathematics. 2021. Vol. 65. No. 7. P. 8-16. DOI: 10.3103/S1066369X21070021.
Privalova V.V. Prosviryakov E.Yu. Layered Marangoni convection with the Navier slip condition // SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES. 2021. Vol. 46. Iss. 1. Article number: 55. https://doi.org/10.1007/s12046-021-01585-5.0.
Savrai R.A. Morozova A.N. A review of studies in the field of production of coatings on metals by means of mechanical alloying // Surfaces and Interfaces. 2021. V. 27. Art. 101451. https://doi.org/10.1016/j.surfin.2021.101451.
Ershkov S.V. Rachinskaya A. Prosviryakov E.Yu. Shamin R.V. On the Semi-Analytical Solutions in Hydrodynamics of Ideal Fluid Flows Governed by Large-Scale Coherent Structures of Spiral-Type // Symmetry-Basel. 2021. Vol. 13. Article ID 2307. https://doi.org/ 10.3390/sym13122307.
Baranovskii E.S. Burmasheva N.V. Prosviryakov E.Yu. Exact solutions to the Navier-Stokes equations with couple stresses // Symmetry-Basel. 2021. V. 13. No. 8. Article ID 1355. https://doi.org/10.3390/sym13081355.
Vladimirov A.P. Drukarenko N.A. Myznov K.E. Using Speckle Images for Determining the Local Plastic Strains Arising at High-Cycle Fatigue of 09G2S Steel // Technical Physics Letters. 2021. Vol. 47. No. 8. P. 773–776. DOI: 10.1134/S1063785021080137.
Emelyanov I.G. Mironov V.I. Strength of Shell Structure Operating in Hydrogenous Media under Pressure // Transportation Research Procedia. 2021. Vol. 54. P. 484-494. 10.1016/J.TRPRO.2021.02.099.
Lebedev P.D. Kazakov A.L. Iterative algorithms for constructing the thinnest coverings of polyhedra by sets of different balls // Trudy Instituta Matematiki i Mekhaniki URO RAN. 2021. Vol. 27. No. 1. P. 116–129. DOI: 10.21538/0134-4889-2021-27-1-116-129.
Kharanzhevskiy E.V. Ipatov A.G. Makarov A.V. Gil’mutdinov F.Z. Soboleva N.N. Krivilyov M.D. Tribological performance of boron-based superhard coatings sliding against different materials // Wear. 2021. Vol. 477. 203835. https://doi.org/10.1016/j.wear.2021.203835.
Vandyshev A.B. Kulikov V.A. Analysis of Parameters for Producing High-Purity Hydrogen from Natural Gas in a Tubular Type Membrane-Catalytic Module // Chemical and Petroleum Engineering. 2021. Vol. 56. Nos. 9-10. P. 715-720. DOI: 10.1007/s10556-021-00833-z.
Vandyshev A.B. Kulikov V.A. Assessment of the Effect of Hydrocarbon and Steam Mixture Flow Rate on the Main Parameters of High-Purity Hydrogen Production in a Membrane-Catalytic Device with a Fixed Membrane Area // Chemical and Petroleum Engineering. 2021. Vol. 57. Nos. 7-8. P. 639-646. DOI: 10.1007/s10556-021-00989-8.
Vandyshev A.B. Kulikov V.A. Assessment of the Effects of Temperature and Pressure on the Efficiency of High-Purity Hydrogen Production from Hydrocarbon Feedstocks in Membrane-Catalytic Devices // Chemical and Petroleum Engineering. 2021. Vol. 56. No. 9-10. P. 799-808. DOI: 10.1007/s10556-021-00845-9.
Burmasheva N.V. Prosviryakov E.Yu. Exact Solution for Couette-Type Steady Convective Concentration Flows // Journal of Applied Mechanics and Technical Physics. 2021. Vol. 62. No. 7. P. 155-166. DOI: 10.1134/S0021894421070051.
Kazakov A.L. Spevak L.F. Exact and approximate solutions of a problem with a singularity for a convection–diffusion equation // Journal of Applied Mechanics and Technical Physics. 2021. Vol. 62. No. 1. P. 18-26. DOI: 10.1134/S002189442101003X.
Kazakov A.L. Spevak L.F. Exact and Approximate Solutions to the Degenerated Reaction-Diffusion System // Journal of Applied Mechanics and Technical Physics. 2021. Vol. 62. No. 4. P. 673-683. DOI: 10.1134/S0021894421040179.
Alwan H.L. Makarov A.V. Soboleva N.N. Korobov Yu.S. Shumyakov V.I. Lezhnin N.V. Zavalishin V.A. Using a Procedure for Estimating Cavitation Impact for Analyzing the Erosion Resistance of Cermet Thermal Sprayed Coatings // Russian Journal of Non-Ferrous Metals. 2021. Vol. 62. No. 6. P. 778-784. DOI: 10.3103/S1067821221060031.
Soboleva N.N. Makarov A.V. Effect of Conditions of High-Temperature Treatment on the Structure and Tribological Properties of Nickel-Based Laser-Clad Coating // Russian Journal of Non-Ferrous Metals. 2021. Vol. 62. No. 6. P. 682-691. DOI: 10.3103/S1067821221060183.
Korobov Yu.S. Alwan H.L. Filippov M.A. Soboleva N.N. Alani I.A. Estemirova S.Kh. Makarov A.V. Sirosh V.A. The effect of martensitic transformation on the cavitation erosion resistance of a TIG-deposited Fe-Cr-C-Al-Ti layer // Surface and Coatings Technology. 2021. Vol. 421. 127391. https://doi.org/10.1016/j.surfcoat.2021.127391.
Alwan H.L. Korobov Yu.S. Elkind D.M. Sirosh V.A. Makarov A.V. Comparative analysis of cavitation resistance of deposited/sprayed layers of carbides, stainless steels and metastable austenite // IOP Conference Series: Materials Science and Engineering. 2021. Vol. 1079. 052073. DOI: 10.1088/1757-899X/1079/5/052073.
Soldatkin V.A. Yurkevich A.V. Tereshin A.V. Determining the Drive Power of the System Controlling the Vibration Amplitude of the Rectifiers for the Continuously Variable Mechanical Transmission with Internal Force Functions // MATEC Web of Conferences. 2021. Vol. 346. 03062. https://doi.org/10.1051/matecconf /202134603062.
Taratorkin I.A. Vyaznikov M.V. Vyaznikov A.M. Increasing Mobility of Tracked Vehicles during Curvilinear Motion by Redistributing Power Flows // MATEC Web of Conferences. 2021. Vol. 346. 03099. https://doi.org/10.1051/matecconf/202134603099.
Yurkevich A.V. Yurkevich L. The Specifics of Calculating the Efficiency of the Continuously Variable Mechanical Transmission with Oscillatory Movement of Internal Links and Force Function Control // MATEC Web of Conferences. 2021. Vol. 346. 03061. https://doi.org/10.1051/matecconf /202134603061.
Guzanov B.N. Pugacheva (Vandysheva) N.B. Slukin E.Yu. Bykova (Gurchenko) T.M. Technology of Obtaining Composite Conglomerate Powders for Plasma Spraying of High-Temperature Protective Coatings // Obrabotka Metallov - Metal Working and Material Science. 2021. Vol. 23. No. 1. P. 6-20. DOI: 10.17212/1994-6309-2021-23.1-6-20.
Pugacheva (Vandysheva) N.B. Nikolin Y. Bykova (Gurchenko) T.M. Senaeva (Pugacheva) E.I. Influence of the chemical composition of the matrix on the structure and properties of monolithic SHS composites // Obrabotka Metallov - Metal Working and Material Science. 2021. Vol. 23. No. 3. P. 124-138. DOI: 10.17212/1994-6309-2021-23.3-124-138.
Yurkevich A.V. Tereshin A.V. Soldatkin V.A. Experimental Characteristics of Mechanical Continuously Variable Transmission with Internal Force Functions // Science & Technique. 2021. Vol. 20. No. 4. P. 310–319. https://doi.org/10.21122/2227-1031-2021-20-4-310-319.
Babaylov N.A. Loginov Yu.N. Polyanskiy L.I. Nature of Fine Materials Compaction When Roll Briquetting in Cells of Different Shapes // Chernye Metally. 2021. Iss. 2 (1070). P. 39-44. DOI: 10.17580/chm.2021.02.07.
Starikova U.S. Soboleva N.N. Makarov A.V. Kharanzhevsky E.V. The influence of boron carbide additive on the structure and hardness of a nickel-based coating // Frontier Materials & Technologies. 2021. No. 4. P. 89–97. DOI: 10.18323/2782-4039-2021-4-89-97.
Skorynina P.A. Makarov A.V. Berezovskaya V.V. Merkushkin E.A. Chekan N.M. Effect of nanostructuring frictional treatment on micromechanical and corrosion properties of stable austenitic chromium-nickel steel // Frontier Materials & Technologies. 2021. No. 4. P. 80–88. DOI: 10.18323/2782-4039-2021-4-80-88.
Petrova (Kuteneva) S.V. Gladkovsky S.V. Nedzvetsky P.D. Veselova V.E. Investigation of Mechanical Behavior of Layered Metal-Rubber Composites Based on Steel and Aluminum Alloy // Key Engineering Materials. 2021. Vol. 902. P. 87-95. https://doi.org/10.4028/www.scientific.net/KEM.902.87.
Putilova E. A. Kryucheva K.D. Zadvorkin S.M. Peculiarities of Structure and Physical-Mechanical Properties of High-Strength Cr-Mo Pipe Steel Applicative Mainly in a Sour Environment // Key Engineering Materials. 2021. Vol. 902. P. 29-34. https://doi.org/10.4028/www.scientific.net/KEM.902.29.
Goruleva L.S. Prosviryakov E.Yu. The Couette Poiseuille Inhomogeneous Shear Flow with the Motion of the Lower Boundary of the Horizontal Layer // Chemical Physics and Mesoscopy. 2021. Vol. 23. No. 4. P. 403-411. DOI: 10.15350/17270529.2021.4.36. VAC list
Konovalov A.V. Kanyukov S.I. Muizemnek O.Yu. A genetic algorithm for estimating preheat numbers for forging shafts on presses // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2021. No. 5. P. 25-34. DOI: 10.18411/2021-0005-2534-12345. VAC list
Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Peculiarities of Magnetic Behavior of Low-Alloy Structural Steel Specimens Under Elastic Deformation After Preliminary Cyclic Loading // Materials Science. Power Engineering. 2021. No. 3. P. 86-96. DOI: 10.18721/JEST.27308. VAC list
Kazakov A.L. Kuznetsov P.A. Spevak L.F. Construction of solutions to the boundary value problem with singularityfor a nonlinear parabolic system // Siberian Journal of Industrial Mathematics. 2021. Vol. 24. No. 4. P. 64-78. DOI: 10.33048/SIBJIM.2021.24.405. VAC list
Guzanov B.N. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Erosion Resistance of a Combined Multilayer Coating Protecting Critical Parts of Modern Gas Turbine Engines [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 2. P. 6-21. DOI: 10.17804/2410-9908.2021.2.006-021.
Burmasheva N.V. Prosviryakov E.Yu. A Class of Exact Solutions with Spatial Acceleration for the Description of Viscous Incompressible Fluid Flows in the Field of Mass Forces [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 6-25. DOI: 10.17804/2410-9908.2021.1.006-025.
Burmasheva N.V. Prosviryakov E.Yu. Exact Solutions of the Navier–stokes Equations for Describing an Isobaric One-Directional Vertical Vortex Flow of a Fluid [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 2. P. 30-51. DOI: 10.17804/2410-9908.2021.2.030-051.
Gorshkov A.V. Prosviryakov E.Yu. Analytical Study of the Ekman Angle for the Benard–marangoni Convective Flow of Viscous Incompressible Fluid [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 4. P. 34-49. DOI: 10.17804/2410-9908.2021.4.34-49.
Kazakov A.L. Spevak L.F. On the Construction of a Heat Wave Generated by a Boundary Condition on a Moving Border [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 6. P. 54-67. DOI: 10.17804/2410-9908.2021.6.054-067.
Kruchkov D.I. Zalazinskiy A.G. Model Representation of An Axisymmetric Steel-Aluminum Sample for Simulation of a Separation Test [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 26-37. DOI: 10.17804/2410-9908.2021.1.026-037.
Prosviryakov E.Yu. Gravitational Principle of Minimum Pressure for Incompressible Flows [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 2. P. 22-29. DOI: 10.17804/2410-9908.2021.2.022-029.
Prosviryakov E.Yu. Burmasheva N.V. Analysis of Specific Kinetic Energy for the Birikh–ostroumov Shear Diffusion Flow [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 55-70. DOI: 10.17804/2410-9908.2021.3.055-070.
Pugacheva (Vandysheva) N.B. Guzanov B.N. Studying the chemical and phase compositions of a chromium-nickel-manganese steel after operation at elevated temperatures in corrosive environments // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 17–30. DOI: 10.17804/2410-9908.2021.3.017-030.
Savrai R.A. Gladkovsky S.V. Lepikhin S.V. Kolobyilin Yu.M. Approaches to the Development of Wear-Resistant Laminated Metal Composites [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 5. P. 24-35. DOI: 10.17804/2410-9908.2021.5.24-35.
Solovei V.D. The Strain and Strain Rate Dependence of the Yield Stress of Aluminum [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 51-54. DOI: 10.17804/2410-9908.2021.1.051-054.
Spevak L.F. Nefedova O.A. Parallel Technology for Solving Nonstationary Heat Conduction Problems in Axisymmetric Domains [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 5. P. 60-71. DOI: 10.17804/2410-9908.2021.6.60-71.
Struzhanov V.V. On One Problem of Determining the Optimal Residual Stress Field [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 1. P. 55-63. DOI: 10.17804/2410-9908.2021.1.055-063.
Struzhanov V.V. On the Rational Choice of the Properties of Structural Elements Constituting Unidirectional Compositions [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2021. Iss. 3. P. 45-54. DOI: 10.17804/2410-9908.2021.3.045-054.
Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Evoluation of Magnetostriction and Differential Magnetic Permeability of Low-Alloy Structural Steel Specimens under Cyclic and Static Deformations // International Journal “NDT Days”. 2021. Vol. IV. Iss. 1. P. 26-32.
VAC list 
