Historical Note
Main Fields of Research Activities
Directorate
Scientific Council
Research Assistants
Postgraduate Education
Contacts
Laboratory of Material Micromechanics
Laboratory of Technical Diagnostics
Laboratory of Constructional Material Science
Laboratory of Deformation and Destruction
Laboratory of System Simulation
Laboratory of Applied Mechanics
Laboratory of Deformation Mechanics
Sector of Nonlinear Vortex Hydrodynamics
Sector of New Materials and Technologies
Department of Transportation Vehicles Mechanics
Collective centre "Plastometria"
Monographies
Search by Authors
Search by Publications
2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 and earlier
Search of Developments
Mechanics of solids and structures, advanced materials and technologies
Automated systems of measurements, nondestructive testing and diagnostics of machine life
Basic algorithms, software and hardware for systems of automated control of compound objects
Mechanics and control of transportation and traction machines
About Us
 
 Research Subdivisions / Laboratory of Constructional Material Science  Print Version   Site Map     Language Switch to Russain Switch to English
 
About Laboratory
Research Assistants
Selected Publications
Developments and Patents


Selected Publications

<< Васк | 1 | 2 | 3 | Forward >>
  1. Shabashov V.A. Makarov A.V. Kozlov K.A. Sagaradze V.V. Zamatovskii A.E. Volkova E.G. Luchko S.N. Deformation-Induced Dissolution and Precipitation of Nitrides in Austenite and Ferrite of a High-Nitrogen Stainless Steel // The Physics of Metals and Metallography. 2018. V. 119. – No. 2. – P. 196-206. – DOI: 10.1134/S0031918X18020096.
    WoS  Scopus 

  2. Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of Heating on the Structure, Phase Composition and Micromechanical Properties of the Metastable Austenitic Steel Strengthened by Nanostructuring Frictional Treatment // The Physics of Metals and Metallography. 2018. V. 119. – Is. 12. – P. 1196-1203.
    WoS  Scopus 

  3. Savrai R.A. Resistance of laser-clad chromium–nickel coatings to failure under contact fatigue loading // The Physics of Metals and Metallography. 2018. V. 119. – Is. 10. – P. 1013-1021. – DOI: 10.1134/S001532301810011X.
    WoS  Scopus 

  4. Skorynina P.A. Makarov A.V. Volkova  E.G. Osinceva A.L. Increasing the Micromechanical and Tribological Characteristics of an Austenitic Steel by Surface Deformation Processing. 2018. Vol. 2053. 030064. https://doi.org/10.1063/1.5084425.
    WoS 

  5. Lezhnin N.V. Makarov A.V. Gavrilov  N.V. Osinceva A.L. Savrai R.A. Improving the Scratch Test Properties of Plasma-Nitrided Stainless Austenitic Steel by Preliminary Nanostructuring Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 040050. – https://doi.org/10.1063/1.5084488.
    WoS 

  6. Emelyanov I.G. Mironov V.I. A Method for Estimating the Hydrogenation of a Shell with Variable Geometrical and Physical-Mechanical Parameters // AIP Conference Proceedings. 2018. Vol. 2053. 030012. https://doi.org/10.1063/1.5084373.
    WoS 

  7. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Durability of a Locomotive Cab at a Railway Crossing Calculated with the Estimation of the Obstacle Parameters // AIP Conference Proceedings. 2018. Vol. 2053. – 040018. – https://doi.org/10.1063/1.5084456.
    WoS 

  8. Makarov A.V. Savrai R.A. Malyigina I.Yu. Volkova E.G. Burov S.V. Nanostructuring and Surface Hardening of Structural Steels by Ultrasonic Impact-Frictional Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 020006. – https://doi.org/10.1063/1.5084352.
    WoS 

  9. Makarov A.V. Soboleva N.N. Gibzun M.S. Malyigina I.Yu. Korobov Yu.S. Increasing the Resistance of a NiCrBSi Coating to Heat Wear by Means of Combined Laser Heat Treatment // AIP Conference Proceedings. 2018. Vol. 2053. – 030037. – https://doi.org/10.1063/1.5084398.
    WoS 

  10. Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Malyigina I.Yu. Trushina E.B. Formation of the Structure of Fe-Ni-Ti-C-B Composites Under Self-Propagating High-Temperature Synthesis // AIP Conference Proceedings. 2018. Vol. 2053. 020013. https://doi.org/10.1063/1.5084359.
    WoS 

  11. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. Studying the Structure and Micromechanical Properties of a Hardfaced Wear-Resistant Coating // AIP Conference Proceedings. 2018. Vol. 2053. 040079. https://doi.org/10.1063/1.5084517.
    WoS 

  12. Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.
    WoS 

  13. Savrai R.A. Davydova (Pozdejeva) N.A. Makarov A.V. Malyigina I.Yu. Effect of Frictional Treatment on the Microstructure and Surface Properties of Low-Carbon Steel // AIP Conference Proceedings. 2018. Vol. 2053. – 040087. – https://doi.org/10.1063/1.5084525.
    WoS 

  14. Savrai R.A. Makarov A.V. Analytical and Experimental Assessment of Ultimate Tensile Strength of a Hardened Layer on a Material Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030060. – https://doi.org/10.1063/1.5084421.
    WoS 

  15. Savrai R.A. Makarov A.V. Gorkunov E.S. Soboleva N.N. Kogan L.Kh. Malyigina I.Yu. Osinceva A.L. Eddy-Current Testing of Fatigue Degradation in Additionally Heat-Treated Gas Powder Laser Clad NiCrBSi Coating under Contact Fatigue Loading // AIP Conference Proceedings. 2018. Vol. 2053. – 040088. – https://doi.org/10.1063/1.5084526.
    WoS 

  16. Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.
    WoS 

  17. Soboleva N.N. Makarov A.V. Malyigina I.Yu. NiCrBSi coating obtained by laser cladding and subsequent deformation processing // IOP Conf. Series: Journal of Physics: Conference Series. 2018. Vol. 946. 013004.
    WoS 

  18. Lenivtseva O. Tokarev A. Chakin I. Burov S.V. Khudorozhkova Yu.V. Surface Hardening of Commercially Pure Titanium by Non-vacuum Electron Beam Cladding of Powder Mixtures // Obrabotka metallov - Metal Working and Material Science. 2018. Vol. 20. Iss. 2. P. 116-129. DOI: 10.17212/1994-6309-2018-20.2-116-129.
    WoS 

  19. Emelyanov I.G. Mironov V.I. A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 27-35. DOI: 10.15593/perm.mech/2018.3.03.
    Scopus 

  20. Emelyanov I.G. Mechanics of Shells and Its Applications [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 6-28. DOI: 10.17804/2410-9908.2018.2.006-028.
    РИНЦ 

  21. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
    РИНЦ 

  22. Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
    РИНЦ 

  23. Vandyshev A.B. Kulikov V.A. Estimate of High-Purity Hydrogen Production Efficiency in Membrane-Catalytic-Systems from Reforming Products of Gasoline, Kerosene, and Diesel Oil // Chemical and Petroleum Engineering. 2017. Vol. 53. No. 9-10. P. 592-597. DOI: 10.1007/s10556-018-0386-2.
    WoS  Scopus 

  24. Pugacheva (Vandysheva) N.B. Malyigina I.Yu. Michurov N.S. Pugacheva E.I. Antenorova N.P. Effect of Heat Treatment on the Structure and Phase Composition of Aliminum Matrix Composites Containing Silicon Carbide [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. – DOI: 10.17804/2410-9908.2017.6.028-036. 2017. Iss. 6. P. 28-36.

  25. Yu.S. Korobov S.V. Nevezhin M.A. Filiрpov Makarov A.V. Malyigina I.Yu. D. Fantozzi A. Milanti H. Koivuluoto P. Vuoristo Properties of Arc-Sprayed Coatings from Fe-based Cored Wires for High-Temperature Applications // AIP Conf. Proc. 2017. Vol. 1915. – 020004.
    Full text>>

  26. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluating the Effect of Damping Structures in the Design of a Locomotive Cab during a Collision // AIP Conf. Proc. 2017. Vol. 1915. – 040011.
    Full text>>

  27. Makarov A.V. G.V. Samoylova N.V. Gavrilov A.S. Mamayev Osinceva A.L. T.E. Kurennykh Savrai R.A. Effect of Preliminary Nanostructuring Frictional Treatment on the Efficiency of Nitriding of Metastable Austenitic Steel in Electron Beam Plasma // AIP Conf. Proc. 2017. Vol. 1915. – 030011.
    Full text>>

  28. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Thermal Stability of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2017. Vol. 1915. – 030012.
    Full text>>

  29. Savrai R.A. Kuznetsov A.V. Evaluation of Contact Stresses in the Surface of an Elastic-Plastic Plate Penetrated by a Flat-Ended Rigid Cylindrical Punch // AIP Conf. Proc. 2017. Vol. 1915. – 040050.
    Full text>>

  30. Savrai R.A. Makarov A.V. Gorkunov E.S. Soboleva N.N. L.Kh. Kogan Malyigina I.Yu. Osinceva A.L. Davydova (Pozdejeva) N.A. Eddy-Current Testing of the Fatigue Degradation of a Gas Powder Laser Clad NiCrBSi–Cr3C2 Composite Coating under Contact Fatigue Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040049.
    Full text>>

  31. Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098.
    Full text>>

  32. Yury Korobov Alexander Vopneruk Alexander Kotelnikov Khudorozhkova Yu.V. Burov S.V. Prabu Balu Structure Analysis of Laser Deposited NiBSi-WC Coatings on a Cu-Cr-Zr Substrate // AIP Conference Proceedings. 2017. Vol. 1909. – 020098.
    Full text>>

  33. Vandyshev A.B. Kulikov V.A. Analysis of Parameters and Modes for Producing High-Purity Hydrogen from Natural Gas in Membrane-Catalytic Devices // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 1-2. P. 49-55.

  34. Vandyshev A.B. Kulikov V.A. Energy and Resource Efficience in Industrial Systems for Production and Use of High-Purity Hydrogen // Chemical and Petroleum Engineering. 2017. Vol. 53. – No. 3-4. P. 166-170.

  35. Savrai R.A. Makarov A.V. Malyigina I.Yu. Rogovaya S.A. Osinceva A.L. Improving the Strength of the AISI 321 Austenitic Stainless Steel by the Frictional Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.5.043-062. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 5. P. 43-62.

  36. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Role of the Strengthening Phases in Abrasive Wear Resistance of Laser-Clad NiCrBSi Coatings // Journal of Friction and Wear. 2017. Vol. 38. – No. 4. P. 272-278.

  37. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Determination of Safe Operating Conditions for Supporting Structures under Abnormal Loads // Journal of Machinery Manufacture and Reliability. 2017. Vol. 46. – No. 2. P. 142-148.

  38. S.D. Neulybin Yu.D. Shchitsyn V.S. Verkhorubov Yu.S. Korobov M.A. Filippov Savrai R.A. Soboleva N.N. Metallurgical Processes During Plasma Remelting of a Metallized Coating of the Fe-C-Cr-Ti-Al System // Metallurgist. 2017. Vol. 60. – Nos. 11–12. P. 1202-1206.

  39. Makarov A.V. N.V. Gavrilov G.V. Samoylova A.S. Mamaev Osinceva A.L. Savrai R.A. Effect of a Continuous and Gas-Cyclic Plasma Nitriding on the Quality of Nanostructured Austenitic Stainless Steel // Obrabotka Metallov – Metal Working and Material Science. 2017. Вып. 2. P. 55-66.

  40. Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Makarov A.V. N.L. Pecherkina Structure and Mechanical Properties of a High-Carbon Steel Subjected to Severe Deformation // Physics of Metals and Metallography. 2017. Vol. 118. – No. 10. P. 1006-1014.

  41. Makarov A.V. Luchko S.N. Shabashov V.A. Volkova E.G. Zamatovskii A.E. Osinceva A.L. Litvinov A.V. Sagaradze V.V. Structural and phase transformations and micromechanical properties of the high-nitrogen austenitic steel deformed by shear under pressure // Physics of Metals and Metallography. 2017. Vol. 118. – No. 1. P. 52-64.

  42. Makarov A.V. Skorynina P.A. A.S. Yurovskikh Osinceva A.L. Effect of the Conditions of the Nanostructuring Frictional Treatment Process on the Structural and Phase States and the Strengthening of Metastable Austenite Steel // Physics of Metals and Metallography. 2017. Vol. 118. – No. 12. P. 1225-1235.

  43. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Vehicle Survivability Calculation // Russian Journal of Construction Science and Technology. 2017. Vol. 3. – No. 1. P. 40-44.

  44. Butorin D.E. Burov V.G. Burov S.V. Tolochko B.I. Bataev I.A. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. V. 60. – Is. 5. P. 817-820.

  45. D.E. Butorin V.G. Burov Burov S.V. B.P. Tolochko I.A. Bataev. Analysis of Structural Transformations Occuring in Surface Layers of D16 Alloy Samples During Sliding Friction // Russian Physics Journal. 2017. Vol. 60. – Iss. 5. P. 817-820.

  46. Burov S.V. Khudorozhkova Yu.V. Dependence of Mechanical and Magnetic Properties of Hypereutectoid Steel on Excess Cementite Morphology [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6.
    more in detail>>

  47. Makarov A.V. Yakovleva S.P. Volkova E.G. Makharova S.N. Mordovskoy P.G. Special Features of the Formation of the Microstructure of the 09G2S Steel under Conditions of Cold and Warm Equal-Channel Angular Pressing [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. P. 39-47.

  48. Makarov A.V. Davydova (Pozdejeva) N.A. Malyigina I.Yu. Lyzhin  V.V. Korshunov L.G. Improving the Thermal Stability and Heat Wear Resistance of Carburized Chromium-Nickel Steel by Nanostructuring Frictional Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 5. P. 49-66.

  49. Vandyshev A.B. Analyzing the Parameters of Membrane Catalytic Systems for Extraction of Highly Pure Hydrogen from Hydrocarbon Feedstock with the Application of Mathematical Modeling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 6-45.

  50. Savrai R.A. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The Behavior of Gas Powder Laser Clad NiCrBSi Coatings under Contact Loading // Journal of Materials Engineering and Performance. 2016. Vol. 23. – Is. 3. P. 1068-1075.

  51. Gorkunov E.S. Senaeva (Pugacheva) E.I. Zadvorkin S.M. Makarov A.V. Pecherkina N.L. Kalinin G.Yu. Mushnikova S.Yu. Fomina O.V. Investigation of the Structure and Properties of the Material of Various Zones of the Welded Joint of the Austenitic Nitrogen-Containing Steel upon Elastoplastic Deformation // Physics of Metals and Metallography. 2016. Vol. 117. – No. 11. P. 1153-1163.

  52. Bataev A.A. Burov S.V. Bataev I.A. Burov V.G. Stability Analysis of the Copper Surface Layer Structure in the Process of Sliding Friction by the Method of Diffraction Analysis Using Synchrotron Radiation // Russian Physics Journal. 2016. Vol. 59. – Iss. 2. P. 314-316.

  53. Makarov A.V. Gorkunov E.S. Skorynina P.A. Kogan L.Kh. Yurovskikh A.S. Osinceva A.L. Eddy-Current Control of the Phase Composition and Hardness of Metastable Austenitic Steel after Different Modes of Nanostructuring Attrition Treatment // Russian Journal of Nondestructive Testing. 2016. V. 52. – No. 11. P. 627-637.

  54. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. The Definition of the Resistance Area Boundaries for a Locomotive Operator Cab under Non-Regulated Loads // AIP Conf. Proc. 2016. Vol. 1785. – 040014. – http://dx.doi.org/10.1063/1.4967071.

  55. Khudorozhkova Yu.V. Kamantsev I.S. Burov S.V. The Features of Phase Transformations and Structural Changes in Steels with Stable and Metastable Austenite under Fatigue Loading // AIP Conf. Proc. 2016. Vol. 1785. – 040025. – http://dx.doi.org/10.1063/1.4967082.

  56. Savrai R.A. Makarov A.V. Gorkunov E.S. Pecherkina N.L. Rogovaya S.A. Osinceva A.L. Kalinin G.Yu. Mushnikova S.Yu. The Effect of Temperature on the Mechanical Characteristics of the Nitrogen-Containing 04Kh20N6G11M2AFB Steel under Static Tension // AIP Conf. Proc. 2016. Vol. 1785. – 030026. – http://dx.doi.org/10.1063/1.4967047.

  57. Soboleva N.N. Makarov A.V. Malyigina I.Yu. Savrai R.A. Wear Resistance of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2016. Vol. 1785. – 030028. – http://dx.doi.org/10.1063/1.4967049.

  58. Soboleva N.N. Makarov A.V. Malyigina I.Yu. Osinceva A.L. The formation of NiCrBSi coatings with increased wear resistance by gas powder laser cladding // Abstracts of International Congress on Energy Fluxes and Radiation Effects, Tomsk, Russia, 21-26 September,. Tomsk: Publishing House of IAO SB RAS, 2015. 336 p.

  59. Emelyanov I.G. Investigation into the Contact Interaction between Shell and Base with Notches // Journal of Machinery Manufacture and Reliability. 2015. Vol. 44. No. 3. P. 263-270.

  60. Gorkunov E.S. Senaeva (Pugacheva) E.I. Zadvorkin S.M. Makarov A.V. Pecherkina N.L. Kalinin G.Yu. Mushnikova S.Yu. Fomina O.V. Behavior of Magnetic Characteristics in Promising Nitrogen-Containing Steels upon Elastoplastic Deformation // Physics of Metals and Metallography. 2015. Vol. 116. Is. 8. P. 838-849.

  61. Vandyshev A.B. Kulikov V.A. Analysis of parameters of high-purity hydrogen production from methane in a laboratory-scale membrane reformer with an ultrathin palladium membrane // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 3-4. P. 250-256. DOI 10.1007/s10556-015-0032-1.

  62. Vandyshev A.B. Kulikov V.A. Hydrogen Permeability of Palladium Membranes Made of Alloy V-1 in Laboratory Investigations And Membrane Devices // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 5-6. P. 396-401. DOI 10.1007/s10556-015-0058-4.

  63. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. Formation of wear-resistant chromium-nickel coating with extra high thermal stability by combined laser-and-heat treatment // Metal Science and Heat Treatment. 2015. V. 57. No. 3-4. P. 161-168.

  64. Makarov A.V. Savrai R.A. Gorkunov E.S. Yurovkikh A.S. Malyigina I.Yu. Davydova (Pozdejeva) N.A. Structure, Mechanical Characteristics, and Deformation and Fracture Features of Quenched Structural Steel under Static and Cyclic Loading after Combined Strain-Heat Nanostructuring Treatment // Physical Mesomechanics. 2015. Vol. 18. No. 1. P. 43-57.

  65. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. On an approach to the evaluation of the strength of a spatial rod system under impact loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 16-23.

  66. Gorkunov E.S. Savrai R.A. Makarov A.V. Zadvorkin S.M. Magnetic techniques for estimating elastic and plastic strains in steels under cyclic loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 6-15.

  67. Makarov A.V. Mitropolskaya S.Yu. Maltseva L.A. Levina A.V. Progress in ultra-deformable stainless steels for medical tool application [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 44-56. URL: http://dream-journal.org/DREAM_Issue_2_2015_Maltseva_L.A._et_al._44_56.pdf.

  68. Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The Tribological Performances of a NiCrBSi – TiC Laser-Clad Composite Coating under Abrasion and Sliding Friction [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 83-97. URL: http://dream-journal.org/issues/2015-3/2015-3_33.html.

  69. Vandyshev A.B. Kulikov V.A. Calculating the main parameters of a Membrane Reformer with a Production Rate of 40 m3/h Designed for Producing Highly Pure Hydrogen from Natural Gas [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 109-121. URL: http://dream-journal.org/issues/2015-3/2015-3_31.html.

  70. Vandyshev A.B. Kulikov V.A. Preparation of specially pure hydrogen from dimethyl ester in a high-temperature converter-membrane equipment system with catalytic conversion of CH4 or CO in the space above a membrane // Chemical and Petroleum Engineering. 2014. Vol. 49, No 9-10. P. 660-667.

  71. Burov S.V. Khudorozhkova Yu.V. The influence of cooling rate on the morphology of cementite in hypereutectoid steel // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 153 p.

  72. Khudorozhkova Yu.V. Burov S.V. Investigation into the structure and properties of wear-resistant coatings based on chromium metastable austenite // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 154 p.

  73. Gorkunov E.S. Taratorkin A.I. Makarov A.V. Magnetic techniques for estimating elastic and plastic strains in steels under cycliс loading // Chapter in book Advanced Dynamics and Model Based Control of Structures and Machines / Eds. A.K. Belyaev, Hans Irschik, Michael Krommer: – , 2014, XVIII, 316 p. Springer, 2014. Chapter 15. P. 137-144.

  74. Emelyanov I.G. Kuznetsov A.V. The Stressed State of Shell Structures under Local Loads // Journal of Machinery and Reliability. 2014. Vol. 43. No 1. P. 42-47.

  75. Emelyanov I.G. Kuznetsov A.V. The stressed state of shell structures under local loads // Journal of Machinery Manufacture and Reliability. 2014. V. 43. – No. 1. P. 42-47.

  76. Vandyshev A.B. Kulikov V.A. Comparison of calculated and experimental flow data for a membrane reformer for special-purity hydrogen production from natural gas // Chemical and Petroleum Engineering. 2014. V. 49. – Nos. 9-10. P. 660-667.

  77. Vandyshev A.B. Kulikov V.A. Preparation of specially pure hydrogen from dimethyl ester in a high-temperature converter-membrane equipment system with catalytic conversion of CH4 or CO in the space above a membrane // Chemical and Petroleum Engineering. 2014. V. 49. – Nos. 11-12. P. 719-726.

  78. Makarov A.V. Korshunov L.G. Taratorkin A.I. Davydova (Pozdejeva) N.A. Malyigina I.Yu. Chernenko N.L. Influence of Prolonged Heating on Thermal Softening, Chemical Composition, and Evolution of the Nanocrystalline Structure Formed in Quenched High-Carbon Steel upon Friction Treatment // The Physics of Metals and Metallography. 2014. V. 115. No. 3. P. 303-314.

  79. Emelyanov I.G. Mironov V.I. Contact problem for a shell considering the transverse load // Journal of Machinery Manufacture and Reliability. 2013. V. 42. Is. 1. P. 36-40.

  80. Khudorozhkova Yu.V. Burov S.V. Korobov Yu.S. Devyatyarov M.S. Effect of Nickel on Structure of Cu–Cr–Zr Bronze after Annealing at 800 and 900 °С // Modern materials and technologies. 2013. №1. P. 117-120.

  81. Ivanov M. Smirnov S.V. Pavlyishko S.V. Ivanov D. Brenner D. Shenderova O. Tribological Properties of Motor Oil with Nanodiamond Additive Tested for Steel Friction Surfaces with Different Hardnesses // MRS Online Proceedings Library. 2013. Vol. 6038. P. 1-6.

  82. Kuznetsov V.P. Smolin I.Yu. Dmitriev A.I. Konovalov D.I. Makarov A.V. et al. Finite Element Simulation of Nanostructuring Burnishing // Physical Mesomechanics. 2013. Vol. 16. – № 1. P. 62-72.

  83. Makarov A.V. Gorkunov E.S. Taratorkin A.I. Kogan L.Kh. Yurovskikh A.S. Kolobyilin Yu.M. Malyigina I.Yu. Davydova (Pozdejeva) N.A. The Influence of a Combined Strain–Heat Treatment on the Features of Electromagnetic Testing of Fatigue Degradation of Quenched Constructional Steel // Russian Journal of Nondestructive Testing. 2013. Vol. 49. – № 12. P. 690-704.

  84. Barashkova E.A. Emelyanov I.G. Determination of the Stress State of Shells under Local Load // MATHEMATICAL METHODS and OPTIMIZATION TECHNIQUES in ENGINEERING. Proceedings of the 1st International Conference on Optimization Techniques in Engineering (OTENG '13), Antalya, Turkey, October 8-10. 2013. P. 109-113.

  85. Vandyshev A.B. Kulikov V.A. Extraction of extra pure hydrogen from methan steam conversion products in membrane equipment, combined simultaneously with two CO and CH4 conversion catalysts // Chemical and Petroleum Engineering. 2012. Vol. 47, No 11-12 (march). P. 831-836.

  86. Yana Lizunkova Burov S.V. Thomas Hassel Marten Sebastian Bierbaum Friedich-Wilhelm Bach Temperature control during the APN-process on the steel 1.3343 // Engineering Materials. 2012. Vol. 504-506. P. 1017-1022.

  87. Ivanov M.G. Ivanov D.M. Pavlyishko S.V. Petrov I. Vargas  A. mCguire G. Shenderova O. Nanodiamond-Based Nanolubricants // Fullerenes, Nanotubes and Carbon Nanostructures. 2012. Vol. 20. Issue 4-7. P. 606-610.

  88. Makarov A.V. Pozdejeva N.A. Taratorkin A.I. et al. Improvement of wear resistance of quenched structural steel by nanostructuring frictional treatment // Journal of Friction and Wear. 2012. Vol. 33. – Issue: 6. P. 433-442.

  89. Gorbunova T.I. Pervova M.G. Trushina E.B. Pavlyishko S.V. Zapevalov A.Ya. Saloutin V.I. A New Application of Derivatives of Polychlorobiphenyls and Polyethylene Glycols // Russian Journal of Applied Chemistry. 2012. Vol. 85. No 10. P. 1632-1636.

  90. Makarov A.V. Gorkunov E.S. Taratorkin A.I. et al. Magnetic and eddy-current testing of hardened constructional steel subjected to combined strain-thermal treatment // Russian Journal of Nondestructive Testing. 2012. Vol. 48. – Issue: 12. P. 673-685.

  91. Makarov A.V. Gorkunov E.S. Taratorkin A.I. et al. The peculiarities of magnetic and eddy-current testing of quenched structural steel hardened by nanostructuring frictional treatment // Russian Journal of Nondestructive Testing. 2012. Vol. 48. – Issue: 11. P. 615-622.

  92. Barashkova E. Emelyanov I.G. Stress State of Shells under Arbitrary Load // In Proceedings of 5th WSEAS International Conference on Finite Differences - Finite Elements – Finite Volumes - Boundary Elements (F-and-B'12), Prague, Czech Republic, September 24-26. 2012. P. 33-37.

  93. Ivanov M. Ivanov D. Pavlyishko S.V. Koscheev A. Shenderova O. A. Nanodiamond-based Nanolubricants: polyester oil based formulations // MRS Proceedings, 1452, mrss 12-1452-ff08-05, doi:10.1557/opl.2012.1228. 2012. http://journals.cambridge.org/abstract_S1946427412012286.

  94. Makarov A.V. Schastlivtsev V.M. Tabatchikova T.I. Osinceva A.L. Yakovleva I.L. Egorova L.Yu. Effect of silicon on the wear resistance of high-carbon steels with the structures of isothermal decomposition of austenite during friction and abrasive action // Russian Metallurgy (Metally). 2011. No. 4. P. 296–302.

  95. Vandyshev A.B. Kulikov V.A. Evaluation of the efficiency of preparing especially pure hydrogen from methanol and ethanol in membrane equipment, combined with a methane or carbon monoxide conversion catalyst // Chemical and Petroleum Engineering. 2011. Vol. 47, Nos. 7-8. P. 536-544.

  96. Gorkunov E.S. Mitropolskaya S.Yu. Groznaya E.M. Osinceva A.L. Mushnikov A.N. Effect of elastoplastic loading on magnetic properties of steel 20 after gas carburasing // Russian Journal of Nondestructive Testing. 2011. No. 4. P. 3–16.

  97. Busko V.N. Vengrinovich V.L. Dovgyallo A.G. Makarov A.V. Gorkunov E.S. Malyigina I.Yu. To the problem of non destructive diagnostics of steеl surface layers nano-structured by attrition // Abstr. International Conference ”Optical Techniques and Nano-Tools for Material and Life Sciences ”, Minsk, Belarus, June 15-19, 2010. Minsk, Belarus, 2010. P.1.

  98. Makarov A.V. Gorkunov E.S. Malyigina I.Yu. Kogan L.Kh. Savrai R.A. Eddy current testing of quality of chrome-nickel produced during gas-powder laser cladding and subsequent stabilizing annealing // Abstracts of 10th European Conference on Non-Destructive Testing, Moscow, June 7-11, 2010. Part 1. 2nd edition. –. M.: Publishing house Spektr, 2010. 108 p.

  99. Gorkunov E.S. Makarov A.V. Zadvorkin S.M. Rashev Ts. Osinceva A.L. Mitropolskaya S.Yu. Savrai R.A. Solov’ev K.E. Testing of phase composition, hardness and wear resistance of high-cromium steels with nitrogen and carbon content by electromagnetic methods // Abstracts of 10th European Conference on Non-Destructive Testing, Moscow, June 7-11, 2010. Part 2. 2nd edition. –. M.: Publishing house Spektr, 2010. P. 266-267.

  100. Makarov A.V. Gorkunov E.S. Kogan L.Kh. Korshunov L.G. Malyigina I.Yu. Osinceva A.L. Kolobyilin Yu.M. Eddy-current testing of laser hardened cemented chrome-nickel steel for drilling bits // Abstracts of 10th European Conference on Non-Destructive Testing, Moscow, June 7-11, 2010. Part 2. 2nd edition. –. M.: Publishing house Spektr, 2010. P. 267-268.

<< Васк | 1 | 2 | 3 | Forward >>
Design and programming
N-Studio беременность, мода, красота, здоровье, диеты, женский журнал, здоровье детей, здоровье ребенка, красота и здоровье, жизнь и здоровье, секреты красоты, воспитание ребенка православное искусство, христианская живопись, христианские стихи, книги скачать, христианская литература, плохие мысли рождение ребенка,пол ребенка,воспитание ребенка,ребенок дошкольного возраста, дети дошкольного возраста,грудной ребенок,обучение ребенка,родить ребенка,загадки для детей,здоровье ребенка,зачатие ребенка,второй ребенок,определение пола ребенка,будущий ребенок
© 2008-2024
Institute of Engineering Science 0.327