Gladkovsky S.V. Ishina E.A. Kuteneva S.V. Raising the Structural Strength of Systematically Alloyed Fe - Cr - Ni - Mo-Base Maraging Steels // Metal Science and Heat Treatment. 2016. Vol. 57. – Iss. 11-12. P. 663-668.
Gorkunov E.S. Gladkovsky S.V. Brittle Fracture Resistance of Chinga Ataxite at Different Mechanical Loading Conditions // Meteoritics & Planetary Science. 2016. Vol. 51. – Special Issue (SI). – A297.
Berezin I.M. Polyakov A.P. Mathematical Modeling of Drawing Rods Made of Titanium Sponge Allowing for Pore Formation // Russian Journal of Non-Ferrous Metals. 2016. Vol. 57. – No. 6. P. 555-564.
Makarov A.V. Gorkunov E.S. Skorynina P.A. Kogan L.Kh. Yurovskikh A.S. Osinceva A.L. Eddy-Current Control of the Phase Composition and Hardness of Metastable Austenitic Steel after Different Modes of Nanostructuring Attrition Treatment // Russian Journal of Nondestructive Testing. 2016. V. 52. – No. 11. P. 627-637.
Shubina A.N. Beketov A.R. Оbabkov N.V. Iskhakov R.F. THE PRESSING PARAMETERS DEPENDENCE FOR THE COMPACTION OF REFRACTORY METALS POWDERS // Сборник материалов X международной конференции «Механика, ресурс и диагностика материалов и конструкций» (Екатеринбург, 16–20 мая 2016 г.). Екатеринбург: ИМАШ УрО РАН. 2016. 51 p.
Konovalov A.V. Smirnov A.S. Belozerov G. A. Muizemnek O.Yu. Simulation of the Rheological Behavior of the 01570C Alloy under High-Temperature Deformation // AIP Conf. Proc. 2016. 1785, 040028. Text in >>
Smirnov A.S. Belozerov G. A. Konovalov A.V. Shveikin V.P. Muizemnek O.Yu. Rheological Behavior and the Formation of the Microstructure of a Composite Based on an Al-Zn-Mg-Cu Alloy with a 10% SiC Content // AIP Conf. Proc. 2016. 1785, 040068. Full text>>
Saraev Yu.N. Bezborodov V.P. Gladkovsky S.V. Golikov N.I. The ways of reliability enhancement of welded metal structures for critical applications in the conditions of low climatic temperatures // AIP Conference Proceedings. 2016. Vol. 1783. – 020195. – DOI: 10.1063/1.4966489.
Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Michurov N.S. Senaeva (Pugacheva) E.I. INVESTIGATION OF LOCAL MECHANICAL PROPERTIES OF MATERIALS IN WELDED JOINTS OF THE VT1-0 TITANIUM ALLOY AND THE 12CR18NI10TI AUSTENITIC CORROSION RESISTANT STEEL WITH AN INTERMEDIATE COPPER INSERT WITH THE USE OF A NANOMECHANICAL TESTING SYSTEM. DOI: 10.1063/1.4967107 // AIP Conference Proceedings. 2016. Vol. 1785. С. 040050.
Smirnov S.V. Veretennikova (Golubkova) I.A. Brusentseva T.A. Filippov A.A. Fomin V.M. STUDYING A HETEROGENEOUS MATERIAL BASED ON EPOXY OLIGOMER FILLED WITH SILICA BY MICROINDENTATION.
DOI: 10.1063/1.4967126 // AIP Conference Proceedings. 2016. Vol. 1785. 040069.
Karamyshev A.P. Nekrasov I.I. Nesterenko A.V. V.S. Parshin Smirnov S.V. Fedulov A.A. Shveikin V.P. Studying the Damage of Ingots under Plastic Deformation on a Lever-Type Radial Forging Machine // AIP Conf. Proc. 2016. Vol. 1785. – 030010. –http://dx.doi.org/10.1063/1.4967031.
Polianski L.I. Babaylov N.A. Loginov Yu.N. Pervukhina D.N. Industrial Recycling of Technogenic Wastes and Mineral Ore Processing // AIP Conf. Proc. 2016. Vol. 1785. – 040046. – http://dx.doi.org/10.1063/1.4967103.
Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Michurov N.S. Finite-Element Simulation of Multiaxial Compaction of Sponge Titanium Powder // AIP Conf. Proc. 2016. Vol. 1785. – 040008. – http://dx.doi.org/10.1063/1.4967065.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. The Definition of the Resistance Area Boundaries for a Locomotive Operator Cab under Non-Regulated Loads // AIP Conf. Proc. 2016. Vol. 1785. – 040014. – http://dx.doi.org/10.1063/1.4967071.
Gorkunov E.S. Zadvorkin S.M. Kuzevanov V.F. Dimitrov R. Magnetic Technique for Detecting Discontinuities in Products Made of Non-Ferromagnetic Materials // AIP Conf. Proc. 2016. Vol. 1785. – 040018. – http://dx.doi.org/10.1063/1.4967075.
Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Control of the Quality of Forged Piece in Shaft Press-Forging CAPP // AIP Conf. Proc. 2016. Vol. 1785. – 040065. – http://dx.doi.org/10.1063/1.4967122.
Khalevitskiy Yu.V. Burmasheva N.V. Konovalov A.S. Partin. Comparative Study of Krylov Subspace Method Implementations for a GPU Cluster in Elastoplastic Problems // AIP Conf. Proc. 2016. Vol. 1785. – 040024. – http://dx.doi.org/10.1063/1.4967081.
Khudorozhkova Yu.V. Kamantsev I.S. Burov S.V. The Features of Phase Transformations and Structural Changes in Steels with Stable and Metastable Austenite under Fatigue Loading // AIP Conf. Proc. 2016. Vol. 1785. – 040025. – http://dx.doi.org/10.1063/1.4967082.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Effect of the Al/SiC Composite Structure on the Pattern of Corrosion Damage // AIP Conf. Proc. 2016. Vol. 1785. – 040049. –http://dx.doi.org/10.1063/1.4967106.
Savrai R.A. Makarov A.V. Gorkunov E.S. Pecherkina N.L. Rogovaya S.A. Osinceva A.L. Kalinin G.Yu. Mushnikova S.Yu. The Effect of Temperature on the Mechanical Characteristics of the Nitrogen-Containing 04Kh20N6G11M2AFB Steel under Static Tension // AIP Conf. Proc. 2016. Vol. 1785. – 030026. – http://dx.doi.org/10.1063/1.4967047.
Shveikin V.P. Smirnov S.V. Nesterenko A.V. Thermomechanical Hardening of Rolled Stock in a Pipe-Rolling Mill Line // AIP Conf. Proc. 2016. Vol. 1785. – 040063. –http://dx.doi.org/10.1063/1.4967120.
Smirnov S.V. Smirnova (Yekzemplyarova) E.O. Pugacheva (Vandysheva) N.B. Studying the Zones of a Welded Joint of an Al-Mg-Li-Zr Aluminum Alloy By Kinetic Indentation // AIP Conf. Proc. 2016. Vol. 1785. – 040064. – http://dx.doi.org/10.1063/1.4967121.
Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Igumnov A.S. A Fracture Locus for Commercially Pure Aluminum at 300 °С // AIP Conf. Proc. 2016. Vol. 1785. – 040067. – http://dx.doi.org/10.1063/1.4967124.
Soboleva N.N. Makarov A.V. Malyigina I.Yu. Savrai R.A. Wear Resistance of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing // AIP Conf. Proc. 2016. Vol. 1785. – 030028. – http://dx.doi.org/10.1063/1.4967049.
Spevak L.F. Nefedova O.A. Solving a Two-Dimensional Nonlinear Heat Conduction Equation with Degeneration by the Boundary Element Method with the Application of the Dual Reciprocity Method // AIP Conf. Proc. 2016. Vol. 1785. – 040077. – http://dx.doi.org/10.1063/1.4967134.
Taratorkin I.A. Derzhanskiy V.B. Taratorkin A.I. Prediction of the Parametrical Resonance Oscillations of Transmission Friction Discs on the Basis of High Precision Determination of Their Modal Characteristics // AIP Conf. Proc. 2016. Vol. 1785. – 040086. – http://dx.doi.org/10.1063/1.4967143.
Veretennikova (Golubkova) I.A. Konovalov D.A. Smirnov S.V. Patterns of the Change in the Mechanical Properties of a Bimetallic Welded Joint under Plastic Deformation // AIP Conf. Proc. 2016. Vol. 1785. – 040089. – http://dx.doi.org/10.1063/1.4967146.
Koroleva (Chekhomova) L.F. Dobrinskaya M.N. Kamantsev I.S. Doped nanocrystalline calcium carbonate-phosphate – a biomaterial for bone repair and strengthening by drug delivery . DOI: 10.17804/2410-9908.2015.5.147-157 // Diagnostics, Resource and Mechanics of materials and structure. 2015. Iss/ 5. P. 147-152. Full text>>
Soboleva N.N. Makarov A.V. Malyigina I.Yu. Osinceva A.L. The formation of NiCrBSi coatings with increased wear resistance by gas powder laser cladding // Abstracts of International Congress on Energy Fluxes and Radiation Effects, Tomsk, Russia, 21-26 September,. Tomsk: Publishing House of IAO SB RAS, 2015. 336 p.
Saraev Y.N. Bezborodov V.P. Senaeva (Pugacheva) E.I. The Influence of Pulsed Heat and Power Supply on the Structure and Properties of Welded Joint Metals and Surfaced Coatings // Applied Mechanics and Materials. 2015. Vol. 788. P. 259-266.
Bychkov I.V. Kazakov A.L. Lempert A.A. Bukharov D.S. Stolbov A.B. An Intelligent Management System for the Development of a Regional Transport Logistics Infrastructure // Automation and Remote Control. 2015. Vol. 72. No. 8.
Kazakov A.L. Lempert A.A. Bukharov D.S. Mathematical Model and Program System for Solving a Problem of Logistic Objects Placement // Automation and Remote Control. 2015. Vol. 72. No. 8.
Yolshina L.A. Muradymov R.V. Vovkotrub E.G. Smirnov S.V. Diamond Synthesis in Aluminum Matrix in Molten Alkali-Halide at Ambient Pressure // Diamond and Related Materials. 2015. Vol. 55. P. 1-11.
Lookin N.A. Rubin L.S. Use of Nonlinear Functional Analog to Digital Conversion in Precision Measurements of Small Electrical Quantities // Gyroscopy and Navigation. 2015. Vol. 6. No. 2. P. 149–155.
Kazakov A.L. Lempert A.A. On Mathematical Models for Optimization Problem of Logistics Infrastructure // International Journal of Artificial Intelligence. 2015. No. 13 (1). P. 200-210.
Solovei V.D. Prigogine theorem for the process of rolling of a viscoplastic strip // Journal of Engineering Physics and Thermophysics. 2015. Vol. 88. № 3. P. 561-567.
Pugacheva (Vandysheva) N.B. Trushina E.B. Antenorova N.P. Pugacheva E.I. Comparative Studies of the Character of Destruction in 38Kh2N2MA and 12Kh2N4A Steel Gearwheel Teeth Operated under Extreme Conditions // Journal of Friction and Wear. 2015. Vol. 36. No. 3. P. 229-236.
Emelyanov I.G. Investigation into the Contact Interaction between Shell and Base with Notches // Journal of Machinery Manufacture and Reliability. 2015. Vol. 44. No. 3. P. 263-270.
Gorkunov E.S. Senaeva (Pugacheva) E.I. Zadvorkin S.M. Makarov A.V. Pecherkina N.L. Kalinin G.Yu. Mushnikova S.Yu. Fomina O.V. Behavior of Magnetic Characteristics in Promising Nitrogen-Containing Steels upon Elastoplastic Deformation // Physics of Metals and Metallography. 2015. Vol. 116. Is. 8. P. 838-849.
Gorkunov E.S. Yurkevich A.V. Zadvorkin S.M. Mushnikov A.N. Yakushenko E.I. Effect of Elastic Deformation on Magnetic Characteristics of Chromium-Nickel Steels // Physics of Metals and Metallography. 2015. Vol. 116. No. 2. P. 147-155.
Pugacheva (Vandysheva) N.B. Antenorova N.P. Pugacheva E.I. Study of the Structure and Properties of Laser-Welded Joints of the Al-Mg-Li Alloy // Physics of Metals and Metallography. 2015. Vol. 116. Is. 8. P. 1259-1269.
Pestov A.V. Kuznetsov V.A. Mekhaev A.V. Gorbunova T.I. Saloutin V.I. Smirnov S.V. Vichuzhanin D.I. Matafonov P.P. Designing New Adhesive Materials Based on Epoxy Oligomers Filled with Organic Compounds // Polymer Science. Series D. Glues and Sealing Materials. 2015. Vol. 8. No. 2. P. 149-152.
Baharev A.A. Vladimirov A.P. Malygin A.S. Mihailova Y.A. Novoselova I.A. Yakin D.I. Druzhinin A.V. Dynamic speckle-interferometer for intracellular processes analyses at high optical magnification // Proc. of SPIE. 2015. Vol. 9529. P. 95291G-1 – 95291G-9.
Vladimirov A.P. Dynamic speckle interferometry of intracellular processes: theory and features of application // Proc. of SPIE. 2015. Vol. 9529. P. 95290Y-1 – 95290Y-9.
Vladimirov A.P. Baharev A.A. Malygin A.S. Mikhailova J.A. Novoselova I.A. Yakin D.I. Application of speckle dynamics for studies of cell metabolism // Proc. of SPIE. 2015. Vol. 9529. P. 95291F-1 – 95291F-10.
Vladimirov A.P. Kamantsev I.S. Veselova V.E. Gladkovsky S.V. Using speckle images correlation for real-time inspection of fatigue crack initiation and propagation // Proc. of SPIE. 2015. Vol. 9525. P. 952525-1 - 952525-6.
Vladimirov A.P. Dynamic Speckle-Interferometry of Microscopic Processes in Thin Biological Objects // Radiophysics and Quantum Electronics. 2015. Vol. 57. No. 8-9. P. 564-576.
Vladimirov A.P. Malygin A.S. Mikhailova Yu.A. et. al. Using Speckle Dynamics for Comparison of the Metabolic Activity of Different Cell Cultures // Radiophysics and Quantum Electronics. 2015. Vol. 57. No. 8-9. P. 584-588.
V.S. Parshin Parshin S.V. Stress State of Metal in Multistage Plastic Deformation // Russian Engineering Research. 2015. Vol. 35. No. 1. P. 1–2.
Korznikov A.V. Dmitriev S.V. Kornikova G.F. Gladkovsky S.V. Potekaev A.I. The Effect of the Heat Treatment Regime on the Structure and Physical-Mechanical Properties of a 23X15KT Hard Magnetic Alloy // Russian Physics Journal. 2015. Vol. 57. Is. 10. P. 1308-1312.
Cherepanov A.N. Orishich A.M. Pugacheva (Vandysheva) N.B. Shapeev V.P. Investigation of the Structure and Properties of Titanium-Stainless Steel Permanent Joints Obtained by Laser Welding with the Use of Intermediate Inserts and Nanopowders // Thermophysics and Aeromechanics. 2015. Vol. 22. Is. 2. P. 135-142.
Vandyshev A.B. Kulikov V.A. Analysis of parameters of high-purity hydrogen production from methane in a laboratory-scale membrane reformer with an ultrathin palladium membrane // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 3-4. P. 250-256. DOI 10.1007/s10556-015-0032-1.
Vandyshev A.B. Kulikov V.A. Hydrogen Permeability of Palladium Membranes Made of Alloy V-1 in Laboratory Investigations And Membrane Devices // Chemical and Petroleum Engineering. 2015. Vol. 51, Nos. 5-6. P. 396-401. DOI 10.1007/s10556-015-0058-4.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. Formation of wear-resistant chromium-nickel coating with extra high thermal stability by combined laser-and-heat treatment // Metal Science and Heat Treatment. 2015. V. 57. No. 3-4. P. 161-168.
Makarov A.V. Savrai R.A. Gorkunov E.S. Yurovkikh A.S. Malyigina I.Yu. Davydova (Pozdejeva) N.A. Structure, Mechanical Characteristics, and Deformation and Fracture Features of Quenched Structural Steel under Static and Cyclic Loading after Combined Strain-Heat Nanostructuring Treatment // Physical Mesomechanics. 2015. Vol. 18. No. 1. P. 43-57.
Nesterenko A.V. Novozhonov V.I. Zalazinskiy A.G. Skripov A.V. Influence of Temperature on Compactibility of Briquettes of Titanium Sponge Alloyed with Hydrogen // Russian Journal of Non-Ferrous Metals. 2015. Vol. 56. Is. 3. P. 287-292.
Brusentseva Т.А. Filippov A.А. Fomin V.М. Smirnov S.V. Veretennikova (Golubkova) I.A. MODIFICATION OF EPOXY RESIN WITH SILICA NANOPARTICLES AND PROCESS ENGINEERING OF COMPOSITES BASED ON THEM. DOI: 10.1007/s11029-015-9523-6 // Mechanics of Composite Materials. 2015. Т. 51. № 4. P. 531-538.
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. On an approach to the evaluation of the strength of a spatial rod system under impact loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 16-23.
Gladkovsky S.V. Potapov A.I. Lepikhin S.V. Studying the Deformation Resistance of Ep679 Maraging Steel [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 16-26. URL: http://dream-journal.org/issues/2015-4/2015-4_32.html.
Gorkunov E.S. Magnetic structural-phase analysis as applied to diagnosing and evaluating the lifetime of products and structural components. Part 1 // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 6-40.
Gorkunov E.S. Magnetic Structural-Phase Analysis. Part I [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 6-50. URL: http://dream-journal.org/issues/2015-3/2015-3_34.html.
Gorkunov E.S. Savrai R.A. Makarov A.V. Zadvorkin S.M. Magnetic techniques for estimating elastic and plastic strains in steels under cyclic loading [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 6-15.
Koroleva (Chekhomova) L.F. Nanoparticulate zirconia-modified solid solutions of aluminum-iron oxides for polishing titanium metal // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Issue 1. P. 90-102.
Kruchkov D.I. Zalazinskiy A.G. Berezin I.M. Romanova O.V. Modelling of compaction of titanium composite powders // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 48-60.
Makarov A.V. Mitropolskaya S.Yu. Maltseva L.A. Levina A.V. Progress in ultra-deformable stainless steels for medical tool application [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 44-56. URL: http://dream-journal.org/DREAM_Issue_2_2015_Maltseva_L.A._et_al._44_56.pdf.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Osinceva A.L. The Tribological Performances of a NiCrBSi – TiC Laser-Clad Composite Coating under Abrasion and Sliding Friction [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 83-97. URL: http://dream-journal.org/issues/2015-3/2015-3_33.html.
Nesterenko A.V. Zalazinskiy A.G. Novozhonov V.I. Effect of Deformation Processing on the Properties and Structure of Titanium Obtained by Plastic Deformation of Hydrogen-Alloyed Titanium Sponge [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 98-108. URL: http://dream-journal.org/issues/2015-3/2015-3_9.html.
Potapov A.I. Gladkovsky S.V. Kokovikhin E.A. Salikhyanov D.R. Dvoynikov D.A. Determining the plastic strain resistance of metallic materials on an automated plastometric complex [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 24-43.
Pugacheva (Vandysheva) N.B. Current Trends in the Development of Heat-Resistant Coatings Based on Iron, Nickel and Cobalt Aluminides [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 51-82. URL: http://dream-journal.org/issues/2015-3/2015-3_30.html.
Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Smirnov S.V. Kalashnikov S.T. Chekushkin V.S. Antenorova N.P. Pankratov A.A. Studying the Changes in the Structure and Properties of a Magnesium Alloy after Operation and Long Annealing at Temperatures of 50 and 70 °С [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 27-39. URL: http://dream-journal.org/issues/2015-4/2015-4_38.html.
Smirnov A.S. Konovalov A.V. Muizemnek O.Yu. Modelling and simulation of strain resistance of alloys taking into account barrier effects // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 61-72.
Smirnov S.V. Veretennikova (Golubkova) I.A. Comparative Evaluation of Metal Damage on the Free Lateral Surface of Single-Layer and Three-Layer Strips under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 6-15. URL: http://dream-journal.org/issues/2015-4/2015-4_39.html.
Solovei V.D. Possible Velocity Disturbances in the Lag Zone and on the Free Boundary in a Viscoplastic Strip under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 49-59. URL: http://dream-journal.org/issues/2015-4/2015-4_35.html.
Vandyshev A.B. Kulikov V.A. Calculating the main parameters of a Membrane Reformer with a Production Rate of 40 m3/h Designed for Producing Highly Pure Hydrogen from Natural Gas [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 109-121. URL: http://dream-journal.org/issues/2015-3/2015-3_31.html.
Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. Stress state influence on plasticity limit of grade Х80 steel // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 73-89.
Vandyshev A.B. Kulikov V.A. Preparation of specially pure hydrogen from dimethyl ester in a high-temperature converter-membrane equipment system with catalytic conversion of CH4 or CO in the space above a membrane // Chemical and Petroleum Engineering. 2014. Vol. 49, No 9-10. P. 660-667.
Burov S.V. Khudorozhkova Yu.V. The influence of cooling rate on the morphology of cementite in hypereutectoid steel // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 153 p.
Khudorozhkova Yu.V. Burov S.V. Investigation into the structure and properties of wear-resistant coatings based on chromium metastable austenite // Abstracts of 2014 Sino-Russian Young Scientist Forum and Symposium on Advanced Materials and Processing Technology, Qingdao, China, 3-6 June,. Qingdao, China, 2014. 154 p.
Derevyagina L.S. Lemeshev N.M. Korznikov A.V. Gladkovsky S.V. Effect of Severe Plastic Deformation on the Structure, Mechanical Properties and Fracture Behavior of Low-Carbon Steel 12GBA // AIP Conference Proceedings. 2014. Vol. 1623. P. 103-106.
Gorkunov E.S. Taratorkin A.I. Makarov A.V. Magnetic techniques for estimating elastic and plastic strains in steels under cycliс loading // Chapter in book Advanced Dynamics and Model Based Control of Structures and Machines / Eds. A.K. Belyaev, Hans Irschik, Michael Krommer: – , 2014, XVIII, 316 p. Springer, 2014. Chapter 15. P. 137-144.
Koroleva (Chekhomova) L.F. Cherednichenko N.V. Dobrinskay M.N. Doped Nanocrystalline Calcium Carbonate-Phosphate-Biomaterial with Transdermal Activity for Osteogenesis//Nanotechnology Vol. 11: Biomaterials / Naveen Kumar Navani and Shishir Sinha. USA: Studium Press LLC, 2014. Part. 14. P. 311-327.
Emelyanov I.G. Kuznetsov A.V. The Stressed State of Shell Structures under Local Loads // Journal of Machinery and Reliability. 2014. Vol. 43. No 1. P. 42-47.
Emelyanov I.G. Kuznetsov A.V. The stressed state of shell structures under local loads // Journal of Machinery Manufacture and Reliability. 2014. V. 43. – No. 1. P. 42-47.
Koroleva (Chekhomova) L.F. Nanocrystalline Doped Calcium Carbonate-Phosphates as a Biomaterial for Osteogenesis // Research Journal of Pharmaceutical, Biological and Chemical Sciences. 2014. 5(6). P. P. 704-710.
Vandyshev A.B. Kulikov V.A. Comparison of calculated and experimental flow data for a membrane reformer for special-purity hydrogen production from natural gas // Chemical and Petroleum Engineering. 2014. V. 49. – Nos. 9-10. P. 660-667.
Vandyshev A.B. Kulikov V.A. Preparation of specially pure hydrogen from dimethyl ester in a high-temperature converter-membrane equipment system with catalytic conversion of CH4 or CO in the space above a membrane // Chemical and Petroleum Engineering. 2014. V. 49. – Nos. 11-12. P. 719-726.
Bitkov V.V. Fetures od Drawing Axially Symmetric Composite Wares with a Filament Core Made of Nonferrous Metals and Alloys // Russian Journal of Non-Ferrous Metals. 2014. Vol. 55 № 2. P. 148-153.
Makarov A.V. Korshunov L.G. Taratorkin A.I. Davydova (Pozdejeva) N.A. Malyigina I.Yu. Chernenko N.L. Influence of Prolonged Heating on Thermal Softening, Chemical Composition, and Evolution of the Nanocrystalline Structure Formed in Quenched High-Carbon Steel upon Friction Treatment // The Physics of Metals and Metallography. 2014. V. 115. No. 3. P. 303-314.
Vladimirov A.P. Time - Average Dynamic Speckle Interferometry // AIP Conf. Proc. 1600, 237. 2014. – http://dx.doi.org/10.1063/1.4879588.
Vladimirov A.P. Bakharev A.A. Malygin A.S. Mikhaylova J.A. Borodin E.M. Poryvayeva N.P. Glinskikh A.P. Application of dynamic speckle-interferometry in the study of the metabolism of cultivated cells with viruses // AIP Conf. Proc. 1600, 357. 2014. – http://dx.doi.org/10.1063/1.4879603.
Klimova O.V. Formal Transition from Algorithm to Model for Digital Signal Processing Operations // Conference Proceedings of the 24th International Crimea Conference “Microwave & Telecommunication Technology”, Sevastopol, September 7-13. 2014. Article number 6959463. P. 445-446. IEEE Catalog Number: CFP14788.
Klimova O.V. Methodology of Data Decomposition and Formal Synthesis of Composition Forms for Representation of Digital Signal Processing Basic Operations // Conference Proceedings of the 24th International Crimea Conference “Microwave & Telecommunication Technology”, Sevastopol, September 7-13. 2014. Article number 6959471. P. 429-430. IEEE Catalog Number: CFP14788.
Koroleva (Chekhomova) L.F. Final Polishing of Metals to Obtain Nanoroughened Surface with Nanoparticulate Complex Oxides of Aluminum and Iron/Recent Advances in Abrasives Research / Prof. Dirk Bahre. USA: Nova Science Publishers, 2013. Part. 6. P. 173-211.
Kazakov A.L. Spevak L.F. Numerical and analytical studies of a nonlinear parabolic equation with boundary conditions of a special form // Applied Mathematical Modelling. 2013. Vol. 37. – Issues 10-11. P. 6918-6928.
Kazakov A.L. Lempert A.A. Bukharov D.S. On Segmenting Logistical Zones for Servicing Continuously Developed Consumers // Automation and Remote Control. 2013. Vol. 74.– №6. P. 968-977.
Smirnov S.V. The Healing of Damage after the Plastic Deformation of Metals // Frattura ed Integrita Strutturale. Special Issue: Russian Fracture Mechanics School. 2013. – 24. P. 7-12. – DOI: 10.3221/IGF-ESIS.24.02.
Dunyushkina L.A. Smirnov S.V. Plaksin S.V. Kuimov V.M. Gorelov V.P. The Across-Plane Conductivity and Microstructure of SrZr0.95Y0.05O3-d Thin Films // Ionics. 2013. Vol. 19. – №12. – DOI 10.1007/s11581-013-0910-5. P. 1715-1722.
Emelyanov I.G. Mironov V.I. Contact problem for a shell considering the transverse load // Journal of Machinery Manufacture and Reliability. 2013. V. 42. Is. 1. P. 36-40.
Gorkunov E.S. Correlation between the Magnetic Behaviour and Damage of Metal Materials under Plastic Deformations // Key Engineering Materials. 2013. Vol. 528. P. 71-78.
Smirnov S.V. Accumulation and healing of damage during plastic metal forming: simulation and experiment // Key Engineering Materials. 2013. V. 528. P. 61-69.
