Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.
Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.
Smirnov A.S. Khalevitskiy Yu.V. Myasnikova M.V. Simulating the Deformation Process of AlMg6/10%SiCp Composite Representative Volume under Macroscopic Uniaxial Strain // AIP Conference Proceedings. 2018. Vol. 2053. 030065. https://doi.org/10.1063/1.5084426.
Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Kopeina A.V. A Fracture Locus for an Aluminum-Based Metal Matrix Composite at 450°С // AIP Conference Proceedings. 2018. Vol. 2053. – 020014. – https://doi.org/10.1063/1.5084360.
Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Smirnov S.V. Pestov A.V. Konovalov D.A. Adhesive Characteristics of Epoxy Glue in Relation to the Microgeometry of the Substrate Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030066. – https://doi.org/10.1063/1.5084427.
Struzhanov V.V. Korkin A.V. Reconstruction of a Tensile Diagram with a Falling Branch from a Pure Bending Diagram // AIP Conference Proceedings. 2018. Vol. 2053. – 030071. – https://doi.org/10.1063/1.5084432.
Volkov S.S. Struzhanov V.V. Critical Microfracture and the Safety Factor in Deformation of Structurally Heterogeneous Materials // AIP Conference Proceedings. 2018. Vol. 2053. – 040102. – https://doi.org/10.1063/1.5084540.
Struzhanov V.V. Korkin A.V. Chaykin A.E. One approach to determination of the ultimate load-bearing capacity of mechanical systems with softening elements // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 4. P. 1-12. DOI: 10.14498/vsgtu1624.
Rekov A.M. Vichuzhanin D.I. The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 53-60. DOI: 10.15593/perm.mech/2018.3.06.
Konovalov A.V. Kozlov A.V. Konovalov D.A. Partin A.S. Features of Stress-Strain State of Thin-Walled Circular Single-Edge-Notch Specimen under Eccentric Tension // PNRPU Mechanics Bulletin. 2018. No. 3. P. 44-52. DOI: 10.15593/perm.mech/2018.3.05.
Smirnov S.V. Kruchkov D.I. Nesterenko A.V. Berezin I.M. Vichuzhanin D.I. Experimental study of short-term transient creep of the Al/SiC metal-matrix composite under uniaxial compression // PNRPU Mechanics Bulletin. 2018. No. 4. DOI: 10.15593/perm.mech/2018.4.09.
Struzhanov V.V. Vichuzhanin D.I. A Method for Converting an Experimental Torsion Diagram for a Cylindrical Specimen to the Stress-Strain Diagram of the Material // PNRPU Mechanics Bulletin. 2018. No. 2. P. 107-113. DOI: 10.15593/perm.mech/2018.2.10.
Vichuzhanin D.I. Yolshina L.A. Smirnov A.S. Muradymov R.V. A Fracture Locus for a 2 Wt % Aluminum-Graphene Metal Matrix Composite at 300° C // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 17-26. DOI: 10.15593/perm.mech/2018.3.02.
Brusentseva T.A. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Stydying the Influence of the Nature of the Filler on the Mechanical Properties of the Der-330 Epoxy Resin [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 27-36. DOI: 10.17804/2410-9908.2018.6.027-036.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
Smirnov S.V. Khotinov V.A. Vichuzhanin D.I. Polukhina O.N. Farber V.M. The Digital Image Correlation Method Applied to Studyingthe Plastic Flowof the 08g2bmsteel under Tension [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 6-13. DOI: 10.17804/2410-9908.2018.3.006-013.
Smirnov S.V. Konovalov D.A. Kalashnikov S.T. Smirnova (Yekzemplyarova) E.O. Studying the Adhesion Strength and Mechanical Properties of Coatings on Aluminum-Magnesium Alloy Samples [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 106-115. DOI: 10.17804/2410-9908.2018.5.106-115.
Zadvorkin S.M. Shveikin V.P. Kalashnikov S.T. Antenorova N.P. On the Applicability of Electromagnetic Testing Methods to Detecting Discontinuities in Steel Structures Intended for Operation in Aggressive Media Under Extreme Loads // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 8-17. DOI: 10.17804/2410-9908.2018.6.008-017.
Kruchkov D.I. Zalazinskiy A.G. Romanova O.V. Nesterenko A.V. Smirnova (Yekzemplyarova) E.O. Determination of parameters for the plasticity model of VT-22 alloy powder particles // Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional'nye pokrytiya. 2018. No. 2. P. 4-12. DOI: 10.17073/1997-308X-2018-2-4-12.
Guryanov G.N. Smirnov S.V. Problemy chernoi metallurgii i materialovedeniya Influence of the contact friction on the stressed state and allowable stress of backward pullin the course // Problemy chernoi metallurgii i materialovedeniya. 2018. No. 1. P. 5-14.
Guryanov G.N. Smirnov S.V. Drawing conditions of round solid profile without axial stress increment because of back tension action // Technologiya metallov. 2018. No. 9. P. 3-12. DOI: 10.31044/1684-2499-2018-9-3-12.
Guryanov G.N. Smirnov S.V. Influence of curve shape of strain hardening on drawing stress and safety factor of round solid profile // Technologiya metallov. 2018. No. 2. P. 13-24.
Guryanov G.N. Smirnov S.V. On development of energy-saving conditions of solid round profile drawing // Technologiya metallov. 2018. No. 7. P. 9-20. DOI: 10.31044/1684-2499-2018-7-9-20.
Guryanov G.N. Smirnov S.V. Influence of the intensitivity of simple strength and size of the work confusion of fiber on axial voltage, stability of strength and growth of medium temperature in the drawing line of wire // Uprochnyayushchie tekhnologii i pokrytiya. 2018. Vol. 14. No. 3 (159). P. 99-106.
Churbaev R.V. Vichuzhanin D.I. A Device for Measuring the Torque upon Loading the Substance by the method of P.W. Bridgman // Zavodskaya laboratoriya. Diagnostika materialov. 2018. Vol. 84. No. 4. P. 66-70. DOI: 10.26896/1028-6861-2018-84-4-66-70.
Konovalov D.A. Veretennikova (Golubkova) I.A. STUDY ON MECHANICAL PROPERTIES OF A BIMETALLIC COMPOSITE PRODUCED BY EXPLOSION WELDING UNDER INCREMENTAL PLASTIC DEFORMATION Письма о материалах . DOI: 10.22226/2410-3535-2018-2-215-219. 2018. Vol. 8. № 2 (30). P. 215-219.
Pugacheva (Vandysheva) N.B. Malyigina I.Yu. Michurov N.S. Pugacheva E.I. Antenorova N.P. Effect of Heat Treatment on the Structure and Phase Composition of Aliminum Matrix Composites Containing Silicon Carbide [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. – DOI: 10.17804/2410-9908.2017.6.028-036. 2017. Iss. 6. P. 28-36.
Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. George Kovacs Influence of Stress State Conditions on Densification Behavior of Titanium Sponge // Acta Polytechnica Hungarica. 2017. Vol. 14. – No. 6. P. 153-168.
Kruchkov D.I. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Vichuzhanin D.I. Studying the Compactibility of the VT22 High-Strength Alloy Powder Obtained by the PREP Method // AIP Conf. Proc. 2017. Vol. 1915. – 040029. Full text>>
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Michurov N.S. Senaeva (Pugacheva) E.I. Cheremicina E.R. Effect of the Content of SiC on the Structure and Properties of D16 alloy matrix composites // AIP Conf. Proc. 2017. Vol. 1915. – 030021. Full text>>
Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. E.V. Derevyankin EBSD Analysis of the Structural State of the Cu-Zn-Mn-Al-Fe-Ni Alloy after Hot Deformation // AIP Conf. Proc. 2017. Vol. 1915. – 030020. Full text>>
Smirnov A.S. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Effect of Fillers in Epoxy Coatings Based on the ED-20 Resin on the Mechanical Properties Determined by Instrumented Microindentation // AIP Conf. Proc. 2017. Vol. 1915. – 020008. Full text>>
Struzhanov V.V. Korkin A.V. Destruction of Nanochains under Stressing // AIP Conf. Proc. 2017. Vol. 1915. – 030028. Full text>>
Volkov S.S. Struzhanov V.V. Fatigue Durability under Random Cyclic Loading // AIP Conf. Proc. 2017. Vol. 1915. – 040062. Full text>>
Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Choosing the Optimal Pareto Composition of the Charge Material for the Manufacture of Composite // AIP Conf. Proc. 2017. Vol. 1915. – 040068. Full text>>
Zamaraev L.M. Smirnov S.V. High-Temperature Short-Term Creep of the 2 and Ti-5Al Titanium Alloys under Heating in Air and Helium // AIP Conf. Proc. 2017. Vol. 1915. – 040069. Full text>>
A.P. Karamyshev I.I. Nekrasov Nesterenko A.V. Parshin S.V. Smirnov S.V. Shveikin V.P. A.A. Fedulov Studying Damage Accumulation in Martensitic Corrosion-Resistant Steel under Cold Radial Reduction // AIP Conf. Proc. – 2017. Vol. 1915. – 030007. Full text>>
Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Michurov N.S. Smirnov A.S. Effect of Hot Plastic Deformation on the Structural State of a Al-10%SiC Composite // AIP Conf. Proc. – 2017. Vol. 1915. – 030022. Full text>>
Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov Modeling the Stress-Strain State of the V95/SiC Aluminum Alloy Matrix Composite under Uniaxial Loading // AIP Conf. Proc. – 2017. Vol. 1915. – 030026. Full text>>
Michurov N.S. Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. The Structural State and Geometric Representation of a Laser-Welded Joint between a Corrosion-Resistant Steel and a Titanium Alloy with a Copper Insert . –https://doi.org/10.1063/1.5013818 // AIP Conference Proceedings. 2017. Vol. 1909. – 020137.
Pugacheva (Vandysheva) N.B. A.N. Cherepanov A.M. Orishich A.G. Malikov I.O. Drozdov V.I. Mali Senaeva (Pugacheva) E.I. Investigation of the Structure and Properties of a Composite Insert Applied at Laser Welding of Steel with Titanium // AIP Conference Proceedings. 2017. Vol. 1893. – 030107. Text in >>
Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. Trushina E.B. A.V. Gerasimova Agapitova O.Yu. Antenorova. Reasons for Cracking of Die-Forged Cuzn34mn3al2feni Brass Blanks [Electronic resource] . – DOI: 10.17804/2410-9908.2017.4.061-080 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 61-80.
Savrai R.A. Makarov A.V. Malyigina I.Yu. Rogovaya S.A. Osinceva A.L. Improving the Strength of the AISI 321 Austenitic Stainless Steel by the Frictional Treatment [Electronic resource] . – DOI: 10.17804/2410-9908.2017.5.043-062. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 5. P. 43-62.
Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A.S. Igumnov A Computational Model of V95/SiCp (7075/ SiCp) Aluminum Matrix Composite Applied to Stress-Strain State Simulation under Tensile, Compressive and Shear Loading Conditions [Electronic resource] . – DOI: 10.17804/2410-9908.2017.6.016-027 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 16-27.
Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. A.V. Pestov Estimating the Effect of Fillers on the Mechanical Properties of Epoxy Glue Coatings by Microindentation [Electronic resource] – DOI: 10.17804/2410-9908.2017.6.103-111 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 103-111.
Smirnov S.V. Veretennikova (Golubkova) I.A. Smirnova (Yekzemplyarova) E.O. V.М. Fomin A.А. Filippov Т.А. Brusentseva Studying Epoxy Resin Reinforced with Silica Dioxide Nanoparticles by Microindentation [Electronic resource] // . – DOI: 10.17804/2410-9908.2017.1.024-035 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 24-35.
Volkov S.S. Struzhanov V.V. Modeling of a Complete Deformation Diagram for Materials with Properties of Auxetics [Electronic resource] . – DOI: 10.17804/2410-9908.2017.2.040-052 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 2. P. 40-52.
S.V. Anakhov Pugacheva (Vandysheva) N.B. Yu.A. Pykin A.V. Matushkin Bykova (Gurchenko) T.M. Qualitative Study of Steel Cutting with the Use of the Narrow Jet Plasma Technology // Inorganic Materials: Applied Research. 2017. Vol. 8. – No. 3. P. 400-405.
Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Smirnov A.S. Pugacheva (Vandysheva) N.B. Konovalov A.V. A fracture locus for a 50 volume-percent Al/SiC metal matrix composite at high temperature // International Journal of Material Forming. 2017. Vol. 10. – Iss. 5. P. 831–843. Full text>>
Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Hierarchical modeling of deformation and damage of metal matrix composite under uniaxial loading conditions . – doi:10.1088/1757-899X/208/1/012037 // IOP Conference Series: Materials Science and Engineering. 2017. Vol. 208. – 012037. Full text>>
E.V. Shalaeva N.I. Medvedeva A.E. Precul Smirnova (Yekzemplyarova) E.O. Smirnov S.V. N.I. Shchegolikhina I.O. Selyanin Ordering Effect on the Mechanical, Electronic and Magnetic Properties of the –Based Non-Canonical Approximant Phase: -Al50Cu33Fe17’-Al50Cu44Fe6 and -Al47.5Cu49.5Fe3 // Philosophical Magazine. 2017. Vol. 97. – No. 13. P. 1024-1046.
Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Identification of the Modified Drucker-Prager Yield Condition and Modeling of Compaction of the Plasticized Titanium Feedstock // Russian Journal of Non-Ferrous Metals. 2017. Vol. 58. – No. 2. P. 297-302.
L.A. Elshina R.V. Muradymov A.G. Kvashnichev Vichuzhanin D.I. N.G. Molchanova A.A. Pankratov Synthesis of New Metal-Matrix Al-Al2O3-Graphene Composite Materials // Russian Metallurgy (Metally). 2017. No. 8. P. 631-641.
Mironov V.I. O. Lukashuk Vichuzhanin D.I. Method for Describing Fatigue Processes in Structural Materials // Solid State Phenomena. 2017. Vol. 265. P. 815-820.
Struzhanov V.V. On the method of orthogonal projections in the theory of elasticity // Vestnik Samarskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Fiziko-matematicheskie nauki. 2017. Vol. 21. – No. 2. P. 308-325.
Smirnov S.V. Myasnikova M.V. Pugacheva (Vandysheva) N.B. Hierarchical of plastic deformation and fracture of complexly aiioyed brass // International Journal of Damage Mechanics. 2016. vol. 25, № 2. P. 251 – 265.
Smirnov S.V. Zamaraev L.M. Energy of Activation of the Vt5 and Vt1-0 Titanium Alloys under Short-Term Creep in Air and Argon [Electronic resource]. 2016. Iss. 6.
Pugacheva (Vandysheva) N.B. Zamaraev L.M. Igumnov А.S. Modeling the Thermo-Stressed State in the Nodes of the Honeycomb Structure with a Non-Uniform Distribution of Physical-Mechanical Properties [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4.. P. 71-88.
Smirnov S.V. Myasnikova M.V. Igumnov A.S. Determination of the Local Shear Strength of a Layered Metal Composite Material with a Ductile Interlayer after Thermocycling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 46-56.
Smirnov S.V. Perunov E.N. Konovalov D.A. Vyskrebentsev S.V. Using a Spatial Location Device for Express Diagnostics of Current Mechanical Properties of Metal Structures [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 4. P. 89-94.
Struzhanov V.V. Volkov S.S. Volkova T.A. Devolopment of Microstructure Damage in Structurally Heterogeneous Materials under Deformation [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 3. P. 21-30.
Veretennikova (Golubkova) I.A. Vichuzhanin D.I. Michurov N.S. Smirnov S.V. Mechanical Properties and Fracture Behavior of the "copper M1 – Steel 09g2s" Bimetal Produced by Explosion Welding [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 6. P. 28-38.
Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Optimizing the Composition of a Composite to Be Pressed from a Noncompact Titanium-Based Raw Material [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 5. P. 39-48.
Smirnov S.V. Myasnikova M.V. Pugacheva (Vandysheva) N.B. Hierarchical Simulation of Plastic Deformation and Fracture of Complexly Alloyed Brass // International Journal of Damage Mechanics. 2016. Vol. 25(2). P. 251-265.
Smirnov A.S. Konovalov A.V. Belozerov G. A. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Peculiarities of the rheological behavior and structure formation of aluminum under deformation at near-solidus temperatures // International Journal of Minerals, Metallurgy and Materials // International Journal of Minerals, Metallurgy and Materials. 2016. Vol.23. – Iss. 5. P. 563-571.
Yolshina L.A. Muradymov R.V. Korsun I.V. Yakovlev G.A. Smirnov S.V. Novel Aluminum-Graphene and Aluminum-Graphite Metallic Composite Materials: Synthesis and Properties // Journal of Alloys and Compounds. 2016. No. 663. P. 449-459.
Smirnov S.V. Konovalov D.A. Parshin S.V. Vyskrebentsev S.V. Degtyar’ V.G. Kalashnikov S.T. Taking into account the residual stresses during transverse calculation of the load frame to extend the service life above the warranty period // Journal of Machinery Manufacture and Reliability. 2016. Vol. 45. – Is. 3. P. 233-238.
Smirnov A.S. Belozerov G. A. Smirnova (Yekzemplyarova) E.O. Konovalov A.V. Muizemnek O.Yu. Specimen Preparation for Metal Matrix Composites with a High Volume Fraction of Reinforcing Particles for EBSD Analysis // Journal of Materials Engineering and Performance. 2016. Vol. 25(7). P. 2907-2913.
Pugacheva (Vandysheva) N.B. Michurov N.S. Bykova (Gurchenko) T.M. Structure and Properties of the Al/SiC Composite Material // Physics of Metals and Metallography. 2016. Vol. 117. – No. 6. P. 634-640.
Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. Bykova (Gurchenko) T.M. Structure and Thermophysical Properties of Aluminum-Matrix Composites // Physics of Metals and Metallography. 2016. Vol. 117. – No. 11. P. 1145-1152.
Pugacheva (Vandysheva) N.B. Myasnikova M.V. Michurov N.S. Simulation of the Elastic Deformation of Laser-Welded Joints of an Austenitic Corrosion-Resistant Steel and a Titanium Alloy with an Intermediate Copper Insert // Physics of Metals and Metallography. 2016. Vol. 117. – No. 2. P. 216-224.
Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Kalashnikov S.T. Ivanov A.V. Smirnov S.V. Frolova N.Yu. Studying Recovery Processes in a Strain-Hardened Al-Mg-Mn-Fe-Si Alloy // Physics of Metals and Metallography. 2016. Vol. 117. – No. 9. P. 920-926.
Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. A numerical Study of Sress-Strain Evolution in Structurally Inhomogeneous Materials Subjected to Uniaxial Loading // PNRPU Mechanics Bulletin. 2016. No. 3. P. 175-187.
Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Michurov N.S. Senaeva (Pugacheva) E.I. INVESTIGATION OF LOCAL MECHANICAL PROPERTIES OF MATERIALS IN WELDED JOINTS OF THE VT1-0 TITANIUM ALLOY AND THE 12CR18NI10TI AUSTENITIC CORROSION RESISTANT STEEL WITH AN INTERMEDIATE COPPER INSERT WITH THE USE OF A NANOMECHANICAL TESTING SYSTEM. DOI: 10.1063/1.4967107 // AIP Conference Proceedings. 2016. Vol. 1785. С. 040050.
Smirnov S.V. Veretennikova (Golubkova) I.A. Brusentseva T.A. Filippov A.A. Fomin V.M. STUDYING A HETEROGENEOUS MATERIAL BASED ON EPOXY OLIGOMER FILLED WITH SILICA BY MICROINDENTATION.
DOI: 10.1063/1.4967126 // AIP Conference Proceedings. 2016. Vol. 1785. 040069.
Karamyshev A.P. Nekrasov I.I. Nesterenko A.V. V.S. Parshin Smirnov S.V. Fedulov A.A. Shveikin V.P. Studying the Damage of Ingots under Plastic Deformation on a Lever-Type Radial Forging Machine // AIP Conf. Proc. 2016. Vol. 1785. – 030010. –http://dx.doi.org/10.1063/1.4967031.
Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Michurov N.S. Finite-Element Simulation of Multiaxial Compaction of Sponge Titanium Powder // AIP Conf. Proc. 2016. Vol. 1785. – 040008. – http://dx.doi.org/10.1063/1.4967065.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Effect of the Al/SiC Composite Structure on the Pattern of Corrosion Damage // AIP Conf. Proc. 2016. Vol. 1785. – 040049. –http://dx.doi.org/10.1063/1.4967106.
Savrai R.A. Makarov A.V. Gorkunov E.S. Pecherkina N.L. Rogovaya S.A. Osinceva A.L. Kalinin G.Yu. Mushnikova S.Yu. The Effect of Temperature on the Mechanical Characteristics of the Nitrogen-Containing 04Kh20N6G11M2AFB Steel under Static Tension // AIP Conf. Proc. 2016. Vol. 1785. – 030026. – http://dx.doi.org/10.1063/1.4967047.
Shveikin V.P. Smirnov S.V. Nesterenko A.V. Thermomechanical Hardening of Rolled Stock in a Pipe-Rolling Mill Line // AIP Conf. Proc. 2016. Vol. 1785. – 040063. –http://dx.doi.org/10.1063/1.4967120.
Smirnov S.V. Smirnova (Yekzemplyarova) E.O. Pugacheva (Vandysheva) N.B. Studying the Zones of a Welded Joint of an Al-Mg-Li-Zr Aluminum Alloy By Kinetic Indentation // AIP Conf. Proc. 2016. Vol. 1785. – 040064. – http://dx.doi.org/10.1063/1.4967121.
Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Igumnov A.S. A Fracture Locus for Commercially Pure Aluminum at 300 °С // AIP Conf. Proc. 2016. Vol. 1785. – 040067. – http://dx.doi.org/10.1063/1.4967124.
Veretennikova (Golubkova) I.A. Konovalov D.A. Smirnov S.V. Patterns of the Change in the Mechanical Properties of a Bimetallic Welded Joint under Plastic Deformation // AIP Conf. Proc. 2016. Vol. 1785. – 040089. – http://dx.doi.org/10.1063/1.4967146.
Yolshina L.A. Muradymov R.V. Vovkotrub E.G. Smirnov S.V. Diamond Synthesis in Aluminum Matrix in Molten Alkali-Halide at Ambient Pressure // Diamond and Related Materials. 2015. Vol. 55. P. 1-11.
Pugacheva (Vandysheva) N.B. Trushina E.B. Antenorova N.P. Pugacheva E.I. Comparative Studies of the Character of Destruction in 38Kh2N2MA and 12Kh2N4A Steel Gearwheel Teeth Operated under Extreme Conditions // Journal of Friction and Wear. 2015. Vol. 36. No. 3. P. 229-236.
Pugacheva (Vandysheva) N.B. Antenorova N.P. Pugacheva E.I. Study of the Structure and Properties of Laser-Welded Joints of the Al-Mg-Li Alloy // Physics of Metals and Metallography. 2015. Vol. 116. Is. 8. P. 1259-1269.
Pestov A.V. Kuznetsov V.A. Mekhaev A.V. Gorbunova T.I. Saloutin V.I. Smirnov S.V. Vichuzhanin D.I. Matafonov P.P. Designing New Adhesive Materials Based on Epoxy Oligomers Filled with Organic Compounds // Polymer Science. Series D. Glues and Sealing Materials. 2015. Vol. 8. No. 2. P. 149-152.
Cherepanov A.N. Orishich A.M. Pugacheva (Vandysheva) N.B. Shapeev V.P. Investigation of the Structure and Properties of Titanium-Stainless Steel Permanent Joints Obtained by Laser Welding with the Use of Intermediate Inserts and Nanopowders // Thermophysics and Aeromechanics. 2015. Vol. 22. Is. 2. P. 135-142.
Nesterenko A.V. Novozhonov V.I. Zalazinskiy A.G. Skripov A.V. Influence of Temperature on Compactibility of Briquettes of Titanium Sponge Alloyed with Hydrogen // Russian Journal of Non-Ferrous Metals. 2015. Vol. 56. Is. 3. P. 287-292.
Brusentseva Т.А. Filippov A.А. Fomin V.М. Smirnov S.V. Veretennikova (Golubkova) I.A. MODIFICATION OF EPOXY RESIN WITH SILICA NANOPARTICLES AND PROCESS ENGINEERING OF COMPOSITES BASED ON THEM. DOI: 10.1007/s11029-015-9523-6 // Mechanics of Composite Materials. 2015. Т. 51. № 4. P. 531-538.
Nesterenko A.V. Zalazinskiy A.G. Novozhonov V.I. Effect of Deformation Processing on the Properties and Structure of Titanium Obtained by Plastic Deformation of Hydrogen-Alloyed Titanium Sponge [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 98-108. URL: http://dream-journal.org/issues/2015-3/2015-3_9.html.
Pugacheva (Vandysheva) N.B. Current Trends in the Development of Heat-Resistant Coatings Based on Iron, Nickel and Cobalt Aluminides [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 51-82. URL: http://dream-journal.org/issues/2015-3/2015-3_30.html.
Pugacheva (Vandysheva) N.B. Vichuzhanin D.I. Smirnov S.V. Kalashnikov S.T. Chekushkin V.S. Antenorova N.P. Pankratov A.A. Studying the Changes in the Structure and Properties of a Magnesium Alloy after Operation and Long Annealing at Temperatures of 50 and 70 °С [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 27-39. URL: http://dream-journal.org/issues/2015-4/2015-4_38.html.
Smirnov S.V. Veretennikova (Golubkova) I.A. Comparative Evaluation of Metal Damage on the Free Lateral Surface of Single-Layer and Three-Layer Strips under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 4. P. 6-15. URL: http://dream-journal.org/issues/2015-4/2015-4_39.html.
Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. Stress state influence on plasticity limit of grade Х80 steel // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 73-89.
Smirnov S.V. The Healing of Damage after the Plastic Deformation of Metals // Frattura ed Integrita Strutturale. Special Issue: Russian Fracture Mechanics School. 2013. – 24. P. 7-12. – DOI: 10.3221/IGF-ESIS.24.02.
Dunyushkina L.A. Smirnov S.V. Plaksin S.V. Kuimov V.M. Gorelov V.P. The Across-Plane Conductivity and Microstructure of SrZr0.95Y0.05O3-d Thin Films // Ionics. 2013. Vol. 19. – №12. – DOI 10.1007/s11581-013-0910-5. P. 1715-1722.
Smirnov S.V. Accumulation and healing of damage during plastic metal forming: simulation and experiment // Key Engineering Materials. 2013. V. 528. P. 61-69.
