Historical Note
Main Fields of Research Activities
Directorate
Scientific Council
Research Assistants
Postgraduate Education
Contacts
Laboratory of Material Micromechanics
Laboratory of Technical Diagnostics
Laboratory of Constructional Material Science
Laboratory of Deformation and Destruction
Laboratory of System Simulation
Laboratory of Applied Mechanics
Laboratory of Deformation Mechanics
Sector of Nonlinear Vortex Hydrodynamics
Sector of New Materials and Technologies
Department of Transportation Vehicles Mechanics
Collective centre "Plastometria"
Monographies
Search by Authors
Search by Publications
2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 and earlier
Search of Developments
Mechanics of solids and structures, advanced materials and technologies
Automated systems of measurements, nondestructive testing and diagnostics of machine life
Basic algorithms, software and hardware for systems of automated control of compound objects
Mechanics and control of transportation and traction machines
About Us
 
 Research Subdivisions / Laboratory of System Simulation  Print Version   Site Map     Language Switch to Russain Switch to English
 
About Laboratory
Research Assistants
Selected Publications
Developments and Patents


Selected Publications

<< Васк | 1 | 2
  1. Byval’tsev S. V. Zalazinskiy A.G. Agapitova O.Yu. Titov V.G. Multi-Criteria Selection of Operational Parameters of Hydromechanical Extrusion // AIP Conference Proceedings. 2020. Vol. 2315. 020013. https://doi.org/10.1063/5.0036699.
    WoS 

  2. Polyakov P.A. Polyakov A.P. Effect of the Quantitative and Qualitative Composition of Alloying Additions to Iron Powder on the Value of Ultimate Shear Resistance // AIP Conference Proceedings. 2020. Vol. 2315. 050020. https://doi.org/10.1063/5.0036681.
    WoS 

  3. Byval’tsev S. V. Augmented reality for SCADA // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 862. 052022. DOI: 10.1088/1757-899X/862/5/052022.
    WoS 

  4. Byval’tsev S. V. Information search subsystem for intellectual system of improvement of pressure processing processes // IOP Conf. Series: Materials Science and Engineering. 2020. Vol. 862. 052015. DOI: 10.1088/1757-899X/862/2/022015.
    WoS 

  5. Baraz V.R. Gerasimov S.S. Gruzdeva I.A.. Chemesova  A.V. Shveikin V.P. Ovchinnikova A.O. Veretennikova (Golubkova) I.A. The additive technology to obtain a three-dimensional model of the 81Cu-19Ni alloy // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012119. DOI: 10.1088/1757-899X/966/1/012119.
    WoS 

  6. Byval’tsev S. V. Multi-criteria optimization of metal pressure processes using experiment planning methods // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012122. doi:10.1088/1757-899X/966/1/012122.
    WoS 

  7. Byval’tsev S. V. Review of the features of augmented reality application in the training of operators and maintenance staff // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 966. 012121. doi:10.1088/1757-899X/966/1/012121.
    WoS 

  8. Zalazinskiy A.G. Kruchkov D.I. Shveikin V.P. Simulation of stress-strain state at the boundaries of a bimetallic composite to determine tear-off resistance // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 033016. doi:10.1088/1757-899X/709/3/ 033016.
    WoS 

  9. Zalazinskiy A.G. Shveikin V.P. Titov V.G. The expert system for improving the technological processes of composite manufacturing // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 709. 044115. doi:10.1088/1757-899X/709/4/ 044115.
    WoS 

  10. Filippov M.A. Sharapova V.A. Shveikin V.P. Nikiforova S.M. Heat treatment effect on ledeburite alloys wear resistance // Materials Today: Proceedings. 2020. https://doi.org/10.1016/j.matpr.2020.08.417.
    WoS 

  11. Byval’tsev S. V. Damage modeling during hydromechanical extrusion // Materials Today: Proceedings. 2020. https://doi.org/10.1016/j.matpr.2020.10.039.
    WoS 

  12. Kruchkov D.I. Nesterenko A.V. A review of experimental studies of creep behavior and superplasticity in a discontinuous SiC aluminum-matrix composites // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE. 2020. Vol. 22. No. 1. P. 130–157. DOI: 10.17212/1994-6309-2020-22.2-130-157. (In Russian).
    WoS 

  13. Petrova (Kuteneva) S.V. Gladkovsky S.V. Dvoynikov D.A. Sergeev S.N. Microstructure and brittle fracture resistance of layered steel composites produced by explosion welding and pack rolling followed by heat treatment // Letters on Materials. 2019. Vol. 9. No. 4. P. 442-446. https://doi.org/10.22226/2410-3535-2019-4-442-446.
    WoS  Scopus 

  14. Zalazinskiy A.G. Nesterenko A.V. Berezin I.M. Study of Compaction of the Titanium Powder by the Experimental-Analytical Method // Russian Journal of Non-Ferrous Metals. 2019. Vol. 60. No. 5. P. 499-503. https://dx.doi.org/10.3103/S1067821219050183.
    WoS  Scopus 

  15. Byval’tsev S. V. Zalazinskiy A.G. Shveikin V.P. An Intelligent System for Improving the Process of Hydromechanical Extrusion // AIP Conference Proceedings. 2019. Vol. 2176. 030003. –https://doi.org/10.1063/1.5135127.
    WoS 

  16. Polyakov P.A. Polyakov A.P. The Effect of Zn, Cu, and C Alloying Microadditives on the Process of Compaction of Iron-Based Powders // AIP Conference Proceedings. 2019. Vol. 2176. 030011. – https://doi.org/10.1063/1.5135135.
    WoS 

  17. Shveikin V.P. Evaluation of the Residual Life and Mechanical Properties of Steels with a Heterophase Structure // AIP Conference Proceedings. 2019. Vol. 2176. 030016. – https://doi.org/10.1063/1.5135140.
    WoS 

  18. Filippov M.A. Sharapova V.A. Shveikin V.P. The effect of heat treatment on the ledeburitic class alloy abrasive wear-resistance // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 2581-2583. https://doi.org/10.1016/j.matpr.2019.08.252.
    WoS 

  19. Byval’tsev S. V. The mechanism of oxide film formation for drawing titanium // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 1949-1952. https://doi.org/10.1016/j.matpr.2019.07.048.
    WoS 

  20. Berezin I.M. Zalazinskiy A.G. Bykova (Gurchenko) T.M. Nesterenko A.V. Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die // PNRPU Mechanics Bulletin. 2019. No. 3. P. 5-16. DOI: 10.15593/perm.mech/2019.3.01.
    Scopus 

  21. Kruchkov D.I. Berezin I.M. Petunin A.A. Computer Simulation of the Stamping of a Long Sheet Blank of a Spherical Tank Element // Vestnik mashinostroeniya. 2019. № 2. P. 28-31.
    РИНЦ 

  22. Titov V.G. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Multi-Criteria Optimization by the “Ideal Point” Method of Raw Material Composition for Composite Blank Manufacturing // Izv. Vuzov Poroshk. Metallurgiya i funkts. pokrytiya. 2019. No. 2. P. 49-56. DOI dx.doi.org/10.17073/1997-308X-2019-2-49-56.
    РИНЦ 

  23. Filippov M.A. Nikiforova S.M. Shveikin V.P. Sharapova V.A. Heat Treatment Forming a Dissipative Metal Base in Wear-Resistant Chromium-Alloyed Cast Iron // AIP Conference Proceedings. 2018. Vol. 2053. – 030016. – https://doi.org/10.1063/1.5084377.
    WoS  Scopus 

  24. Smirnov A.S. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Belozerov G. A. Konovalov A.V. Vichuzhanin D.I. Muizemnek O.Yu. Effect of Silicon Carbide Particles on the Mechanical and Plastic Properties of the AlMg6/10% SiC Metal Matrix Composite // Journal of Composite Materials. 2018. Vol. 52. Iss. 24. P. 3351–3363. DOI:10.1177/0021998318765622.
    WoS  Scopus 

  25. Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Analysis of the Stress-Strain State of a Tool during Hydromechanical Extrusion // AIP Conference Proceedings. 2018. Vol. 2053. 040001. https://doi.org/10.1063/1.5084439.
    WoS 

  26. Gladkovsky S.V. Kamantsev I.S. Petrova (Kuteneva) S.V. Dvoynikov D.A. Kuznetsov A.V. Layered Metal Composites with High Resistance to Brittle Fracture at Low Temperatures // AIP Conference Proceedings. 2018. Vol. 2053. 020003. https://doi.org/10.1063/1.5084349.
    WoS 

  27. Gladkovsky S.V. Petrova (Kuteneva) S.V. Dvoynikov D.A. Veselova V.E. Parametrization of Powder for Al/B4C Metal Matrix Composites Using the Static Image Analysis Method // AIP Conference Proceedings. 2018. Vol. 2053. – 040026. – https://doi.org/10.1063/1.5084464.
    WoS 

  28. Polyakov A.P. A Model of the Dynamic Powder Compaction Process // AIP Conference Proceedings. 2018. Vol. 2053. 040073. https://doi.org/10.1063/1.5084511.
    WoS 

  29. Polyakov P.A. Mushnikov A.N. Polyakov A.P. Magnetic Properties of Iron-Based Vanadium-Containing Powder Composites Blended with Zn, Cu, P, and C // AIP Conference Proceedings. 2018. Vol. 2053. 040075. https://doi.org/10.1063/1.5084513.
    WoS 

  30. Polyakov P.A. Polyakov A.P. Studying the Hardness and Plasticity of Iron-Based Powder Compositions by Microindentation // AIP Conference Proceedings. 2018. Vol. 2053. 040074. https://doi.org/10.1063/1.5084512.
    WoS 

  31. Sergeev S.N. Safarov I.M. Galeyev R.M. Gladkovsky S.V. Dvoynikov D.A. Rogozhkin S.V. Iskandarov А.А. Korznikova G.F. Analysis of the Distribution of Alloying Elements in Ultrafine-Grained Steel 05G2MFBT by Atom-Probe Tomography // IOP Conference Series: Materials Science and Engineering. 2018. Vol. 447. 012009. doi:10.1088/1757-899X/447/1/012009.
    WoS 

  32. Smirnov S.V. Kruchkov D.I. Nesterenko A.V. Berezin I.M. Vichuzhanin D.I. Experimental study of short-term transient creep of the Al/SiC metal-matrix composite under uniaxial compression // PNRPU Mechanics Bulletin. 2018. No. 4. DOI: 10.15593/perm.mech/2018.4.09.
    Scopus 

  33. Shveikin V.P. Thermomechanical Hardening of Steels // Solid State Phenomena. 2018. Vol. 284. P. 507-512. https://doi.org/10.4028/www.scientific.net/SSP.284.507.
    Scopus 

  34. Polyakov A.P. Dynamic Powder Compaction Processes [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 42-82. DOI: 10.17804/2410-9908.2018.2.042-082.
    РИНЦ 

  35. Zadvorkin S.M. Shveikin V.P. Kalashnikov S.T. Antenorova N.P. On the Applicability of Electromagnetic Testing Methods to Detecting Discontinuities in Steel Structures Intended for Operation in Aggressive Media Under Extreme Loads // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 8-17. DOI: 10.17804/2410-9908.2018.6.008-017.
    РИНЦ 

  36. Zalazinskiy A.G. Kruchkov D.I. Titov V.G. Application of the Pareto Criterion to Selecting the Optimal Composition of the Charge Material for the Manufacture of a Composite Blank [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 33-42. DOI: 10.17804/2410-9908.2018.3.033-042.
    РИНЦ 

  37. Kruchkov D.I. Zalazinskiy A.G. Romanova O.V. Nesterenko A.V. Smirnova (Yekzemplyarova) E.O. Determination of parameters for the plasticity model of VT-22 alloy powder particles // Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional'nye pokrytiya. 2018. No. 2. P. 4-12. DOI: 10.17073/1997-308X-2018-2-4-12.
    РИНЦ 

  38. Polyakov P.A. Polyakov A.P. Influence of Small Additives on Extrusion of Workpieces from Powder Composites based on Iron // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2018. No. 7. P. 28-34.
    РИНЦ 

  39. Polyakov P.A. A.V. Dolmatov Kolmyikov V.L. O.V. Romanova M.N. Zakharov Effect of Sintering on the Strength of Iron-Based Powder Composites [Electronic resource] – DOI: 10.17804/2410-9908.2017.1.013-023. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 13-23.

  40. Yu.N. Saraev Gladkovsky S.V. S.V. Lepkhin Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of Welding Technology on Structure, Mechanical Properties and Fracture Toughness of 09G2S Steel Welded Joints [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. –DOI: 10.17804/2410-9908.2017.5.023-042. 2017. Iss. 5. P. 23-42.

  41. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. George Kovacs Influence of Stress State Conditions on Densification Behavior of Titanium Sponge // Acta Polytechnica Hungarica. 2017. Vol. 14. – No. 6. P. 153-168.

  42. E.N. Shipacheva A.A. Petunin Berezin I.M. A Genetic Algorithm Used for Solving One Optimization Problem // AIP Conf. Proc. 2017. Vol. 1915. – 040052.
    Full text>>

  43. Yu.N. Saraev Gladkovsky S.V. Lepikhin S.V. Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of the Welding Method on the Impact Strength and Cyclic Fracture Toughness Parameters of the 09G2S Steel // AIP Conf. Proc. 2017. Vol. 1915. – 030024.
    Full text>>

  44. Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Mathematical Modeling of Hydromechanical Extrusion // AIP Conf. Proc. 2017. Vol. 1915. – 040001.
    Full text>>

  45. Berezin I.M. Polyakov A.P. Polyakov P.A. Research of the Stress-Strain State of Rods Obtained by Porous Blank Extrusion // AIP Conf. Proc. 2017. Vol. 1915. – 030003.
    Full text>>

  46. Kruchkov D.I. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Vichuzhanin D.I. Studying the Compactibility of the VT22 High-Strength Alloy Powder Obtained by the PREP Method // AIP Conf. Proc. 2017. Vol. 1915. – 040029.
    Full text>>

  47. Zalazinskaya E.A. Zalazinskiy A.G. A Model of High-Rate Indentation of a Cylindrical Striking Pin into a Deformable Body // AIP Conf. Proc. 2017. Vol. 1915. – 040067.
    Full text>>

  48. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Choosing the Optimal Pareto Composition of the Charge Material for the Manufacture of Composite // AIP Conf. Proc. 2017. Vol. 1915. – 040068.
    Full text>>

  49. A.P. Karamyshev I.I. Nekrasov Nesterenko A.V. Parshin S.V. Smirnov S.V. Shveikin V.P. A.A. Fedulov Studying Damage Accumulation in Martensitic Corrosion-Resistant Steel under Cold Radial Reduction // AIP Conf. Proc. – 2017. Vol. 1915. – 030007.
    Full text>>

  50. Kruchkov D.I. Zalazinskiy A.G. A Hybrid Modeling System Designed to Support Decision Making in the Optimization of Extrusion of Inhomogeneous Materials // AIP Conf. Proc. – 2017. Vol. 1915. – 040028.
    Full text>>

  51. Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Theoretical and Experimental Investigation of Hydromechanical Extrusion Process . – DOI: 10.11648/j.ajmie.20170201.13 // American Journal of Mechanical and Industrial Engineering. 2017. Vol. 2. – No. 1. P. 17-23.

  52. Gladkovsky S.V. Petrova (Kuteneva) S.V. Kamantsev I.S. R.M. Galeev S.N. Sergeev Dvoynikov D.A. Formation of the Mechanical Properties and Fracture Resistance Characteristics of Sandwich Composites Based on the 09G2S Steel and the EP678 High-Strength Steel of Various Dispersion [Electronic resource] – DOI: 10.17804/2410-9908.2017.6.071-09 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 6. P. 71-90.

  53. Pugacheva (Vandysheva) N.B. Khudorozhkova Yu.V. Trushina E.B. A.V. Gerasimova Agapitova O.Yu. Antenorova. Reasons for Cracking of Die-Forged Cuzn34mn3al2feni Brass Blanks [Electronic resource] . – DOI: 10.17804/2410-9908.2017.4.061-080 // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 4. P. 61-80.

  54. Berezin I.M. A.A. Petunin Kruchkov D.I. G.L. Kovacs Finite-Element Simulation of the Cold Stamping Process of Spherical Vessels // Pollack Periоdica. An International Journal for Engineering and Information Sciences.. 2017. Vol. 12. – No. 1. P. 81-92.

  55. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Identification of the Modified Drucker-Prager Yield Condition and Modeling of Compaction of the Plasticized Titanium Feedstock // Russian Journal of Non-Ferrous Metals. 2017. Vol. 58. – No. 2. P. 297-302.

  56. S.V. Anakhov Gladkovsky S.V. S.V. Lepikhin Dvoynikov D.A. Y.A. Pykin A.V. Matushkin. Mechanical and technological properties of welded joints produced after plasma cutting // Welding International. 2017. Vol. 31. – No. 6. P. 445-451.

  57. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Titov V.G. Optimizing the Composition of a Composite to Be Pressed from a Noncompact Titanium-Based Raw Material [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2016. Iss. 5. P. 39-48.

  58. Smirnov A.S. Konovalov A.V. Belozerov G. A. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Peculiarities of the rheological behavior and structure formation of aluminum under deformation at near-solidus temperatures // International Journal of Minerals, Metallurgy and Materials // International Journal of Minerals, Metallurgy and Materials. 2016. Vol.23. – Iss. 5. P. 563-571.

  59. Safarov I.M. Korznikov A.V. Galeyev R.M. Sergeev S.N. Gladkovsky S.V. Dvoynikov D.A. Litovchenko I.Y. The ultrafine-grained structure, texture and mechanical properties of low carbon steel obtained by various methods of plastic deformation // Letters on Materials. 2016. Vol. 6. – Is. 2. P. 126-131.

  60. Berezin I.M. Polyakov A.P. Mathematical Modeling of Drawing Rods Made of Titanium Sponge Allowing for Pore Formation // Russian Journal of Non-Ferrous Metals. 2016. Vol. 57. – No. 6. P. 555-564.

  61. Smirnov A.S. Belozerov G. A. Konovalov A.V. Shveikin V.P. Muizemnek O.Yu. Rheological Behavior and the Formation of the Microstructure of a Composite Based on an Al-Zn-Mg-Cu Alloy with a 10% SiC Content // AIP Conf. Proc. 2016. 1785, 040068.
    Full text>>

  62. Karamyshev A.P. Nekrasov I.I. Nesterenko A.V. V.S. Parshin Smirnov S.V. Fedulov A.A. Shveikin V.P. Studying the Damage of Ingots under Plastic Deformation on a Lever-Type Radial Forging Machine // AIP Conf. Proc. 2016. Vol. 1785. – 030010. –http://dx.doi.org/10.1063/1.4967031.

  63. Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. Michurov N.S. Finite-Element Simulation of Multiaxial Compaction of Sponge Titanium Powder // AIP Conf. Proc. 2016. Vol. 1785. – 040008. – http://dx.doi.org/10.1063/1.4967065.

  64. Shveikin V.P. Smirnov S.V. Nesterenko A.V. Thermomechanical Hardening of Rolled Stock in a Pipe-Rolling Mill Line // AIP Conf. Proc. 2016. Vol. 1785. – 040063. –http://dx.doi.org/10.1063/1.4967120.

  65. Nesterenko A.V. Novozhonov V.I. Zalazinskiy A.G. Skripov A.V. Influence of Temperature on Compactibility of Briquettes of Titanium Sponge Alloyed with Hydrogen // Russian Journal of Non-Ferrous Metals. 2015. Vol. 56. Is. 3. P. 287-292.

  66. Kruchkov D.I. Zalazinskiy A.G. Berezin I.M. Romanova O.V. Modelling of compaction of titanium composite powders // Diagnostics, Resource and Mechanics of Materials and Structures. 2015. Is. 1. P. 48-60.

  67. Nesterenko A.V. Zalazinskiy A.G. Novozhonov V.I. Effect of Deformation Processing on the Properties and Structure of Titanium Obtained by Plastic Deformation of Hydrogen-Alloyed Titanium Sponge [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 3. P. 98-108. URL: http://dream-journal.org/issues/2015-3/2015-3_9.html.

  68. Potapov A.I. Gladkovsky S.V. Kokovikhin E.A. Salikhyanov D.R. Dvoynikov D.A. Determining the plastic strain resistance of metallic materials on an automated plastometric complex [Электронный ресурс] // Diagnostics, Resource and Mechanics of materials and structures. 2015. Is. 2. P. 24-43.

  69. Bitkov V.V. Fetures od Drawing Axially Symmetric Composite Wares with a Filament Core Made of Nonferrous Metals and Alloys // Russian Journal of Non-Ferrous Metals. 2014. Vol. 55 № 2. P. 148-153.

  70. Mazunin V.P. Dvoynikov D.A. Improving response in control of adjustable electric drives of mechanisms with elastic links // Russian Electrical Engineering. 2012. Volume 83, No 10. P. 556-561.
    more in detail>>

  71. Mazunin V.P. Dvoynikov D.A. Parameteric limitations in nonlinear control systems of mechanisms with elasticity // Russian Electrical Engineering. 2010. V. 81, N. 5. P. 227-231.
    more in detail>>

  72. Bitkov V.V. Pass Schedule Construction of Bimetallic. Wire Drawing Process with Minimal Strain Inhomogeneity. Part 1: Analytical Study. // Wire & Cable Technology International. 2010. September/October № 5. P. 36-39.

  73. Bitkov V.V. Pass Schedule Construction of Bimetallic. Wire Drawing Process with Minimal Strain Inhomogeneity. Part 2: Experimental Drawing of Bimetallic Wire // Wire & Cable Technology International. 2010. November/December № 6. P. 70-72.

  74. Polyakov A.P. The Effect of Parameters of Dynamic Loading on the Propagation Character of Shock Waves in a Powder // Russian Journal of Non-Ferrous Metals. 2009. v.50. - №1. P. 33-38.

  75. Zalazinskiy A.G. Polyakov A.P. Polyakov P.A. A System Simulation of a Production Complex for Fabrication of Composites for Electrotechnology // Russian Journal of Non-Ferrous Metals. 2009. v.50. - №3. P. 255-261.

  76. Bitkov V.V. Simulation of Breakless Multi-Pass Drawing of Thin Size Wire. Part 1: Theoretical Study // Wire & Cable Technology International. 2009. May/June. P. 52-54.

  77. Bitkov V.V. Simulation of Breakless Multi-Pass Drawing of Thin Size Wire. Part 3: Practical Application // Wire & Cable Technology International. 2009. September. P. 98-101.

  78. Bitkov V.V. Expediency of roller dies application in wire drawing // Wire & Cable Technology International. 2008. January Part 1. P. 58-60.

  79. Bitkov V.V. Expediency of roller dies application in wire drawing // Wire & Cable Technology International. 2008. March Part 2. P. 112-113.

  80. Kolmogorov V.L. Zalazinskiy A.G. Zalazinskaya E.A. The superdeep penetration of a particle into an elastic-plastic medium // International Journal of Impact Engineering. 2007. Volume 34, Issue 11, November. P. 1869-1882.

  81. Bitkov V.V. Zalazinskiy A.G. Fine Wire Drawing of Titanium for Suture Material // Wire & Cable Technology International. 2007. March/April. P. 42-44.

  82. Bitkov V.V. Composite wire drawing through two dies in one reduction pass // Wire & Cable Technology International. 2007. September/October. P. 48-51.

  83. Bitkov V.V. Mathematical model simulating thin-diameter steel wiredrawing in the presence of back tension // Wire Journal International. 2007. September. P. 78-83.

  84. Bitkov V.V. Composite Wire Drawing Through Two Dies in One Reduction Pass // Wire & Cable Technology International. 2007. September/October. P. 48-51.

  85. Bitkov V.V. Hydrodynamic friction in dies // Wire Industry. 2007. May. P. 30-38.

  86. Gotlib B. M. Shibanov A. S. Byval’tsev S. V. Intelligent of forging and press complexes // 4th IFAC-Symposium on Mechatronics Systems. - Heidelberg, Germany. 2006. P. 862-866.

  87. Bitkov V.V. Research of Wire Drawing under Conditions of Hydrodynamic Friction // Wire & Cable Technology International. 2006. March/April. P. 94-97.

  88. Bitkov V.V. Mathematical Model Simulating Steel Wire of Thin Diameters Drawing in the Presence of a Back Tension. // Wire Journal International. 2005. September. P. 59-63.

  89. Bitkov V.V. Zalazinskiy A.G. Cumulative Strain Theory for Similation and Development of Wire Drawing // Fatigue and Fracture of Engineering Materials and Structures. 2003. Vol. 26, № 11. P. 1033-1039.

  90. Chistov V.P. Kononenko I.A. Titov V.G. Zakharova G.B. The Domain Process Advice Expert System.//Proceedings of the International Conference "Interactive Systems: the Problems of Human-Computer Interaction", September 23-27, Ulyanovsk, Russia. 2001.

  91. Kolmogorov V.L. Zalazinskiy A.G. On metal joining and the prediction of the strength of solid-phase joints // Journal of Materials Processing Technology. 1998. 75. P. 157-164.

  92. Chistov V.P. Shakirov R.N. Titov V.G. Zakharova G.B. CAD system DISCO for microelectronics devices // Information technology in design. EWITD’96 Proccedings. Moscow, 1996. P. 224-228.

<< Васк | 1 | 2
Design and programming
N-Studio беременность, мода, красота, здоровье, диеты, женский журнал, здоровье детей, здоровье ребенка, красота и здоровье, жизнь и здоровье, секреты красоты, воспитание ребенка православное искусство, христианская живопись, христианские стихи, книги скачать, христианская литература, плохие мысли рождение ребенка,пол ребенка,воспитание ребенка,ребенок дошкольного возраста, дети дошкольного возраста,грудной ребенок,обучение ребенка,родить ребенка,загадки для детей,здоровье ребенка,зачатие ребенка,второй ребенок,определение пола ребенка,будущий ребенок
© 2008-2024
Institute of Engineering Science 0.293