Burmasheva N.V. Prosviryakov E.Yu. Unidirectional Thermocapillary Flows of a Viscous Incompressible Fluid with the Navier Boundary Condition // AIP Conference Proceedings. 2019. Vol. 2176. 030002. –https://doi.org/10.1063/1.5135126.
Byval’tsev S. V. Zalazinskiy A.G. Shveikin V.P. An Intelligent System for Improving the Process of Hydromechanical Extrusion // AIP Conference Proceedings. 2019. Vol. 2176. 030003. –https://doi.org/10.1063/1.5135127.
Emelyanov I.G. Mironov V.I. Hodak A.S. The Boundary Value Problem of Determining Hydrogen Concentration and the Stress State in a Titanium Shell // AIP Conference Proceedings. 2019. Vol. 2176. 030005. –https://doi.org/10.1063/1.5135129.
Kazakov A.L. Spevak L.F. Numerical Study of Travelling Wave Type Solutions for the Nonlinear Heat Equation // AIP Conference Proceedings. 2019. Vol. 2176. 030006. – https://doi.org/10.1063/1.5135130.
Klimova O.V. A Methodology for Parallel Implementation of the Basic Operations of Digital Signal Processing // AIP Conference Proceedings. 2019. Vol. 2176. 030007. – https://doi.org/10.1063/1.5135131.
Koroleva (Chekhomova) L.F. Prosviryakov E.Yu. Models of Matter Self-Organization in Dissipative Kinetic Processes for Obtaining an Active Biomaterial with Transdermal Ability to Restore and Strengthen Bone Tissue // AIP Conference Proceedings. 2019. Vol. 2176. 030008. – https://doi.org/10.1063/1.5135132.
Lookin N.A. Rubin L.S. Precision Nonlinear Low Current Meter // AIP Conference Proceedings. 2019. Vol. 2176. 020003. – https://doi.org/10.1063/1.5135115.
Polyakov P.A. Polyakov A.P. The Effect of Zn, Cu, and C Alloying Microadditives on the Process of Compaction of Iron-Based Powders // AIP Conference Proceedings. 2019. Vol. 2176. 030011. – https://doi.org/10.1063/1.5135135.
Privalova V.V. Prosviryakov E.Yu. An Inhomogeneous Couette-Type Flow with a Perfect Slip Condition at the Lower Boundary of an Infinite Fluid Layer // AIP Conference Proceedings. 2019. Vol. 2176. 030012. – https://doi.org/10.1063/1.5135136.
Privalova V.V. Prosviryakov E.Yu. Convective Couette-Type Flows Under Condition of Slip and Heating at the Lower Boundary // AIP Conference Proceedings. 2019. Vol. 2176. 030024. – https://doi.org/10.1063/1.5135148.
Privalova V.V. Prosviryakov E.Yu. Exact Solution of the Convective Flow of a Viscous Fluid Layer with a Heated Lower Boundary // AIP Conference Proceedings. 2019. Vol. 2176. 030022. – https://doi.org/10.1063/1.5135146.
Pugacheva (Vandysheva) N.B. NikolinYu.V. Senaeva (Pugacheva) E.I. The Structure and Wear Resistance of a Ti-Ni-Fe-C-B Composite // AIP Conference Proceedings. 2019. Vol. 2176. 020007. – https://doi.org/10.1063/1.5135119.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Veselov I.N. Pyshmintsev I.Y. Investigation of Structure and Properties of Low-Carbon Low-Alloyed Cr-Mo Pipe Steel Intended for Operating in Sour Environment // AIP Conference Proceedings. 2019. Vol. 2167. 020291. – https://doi.org/10.1063/1.5132158.
Shveikin V.P. Evaluation of the Residual Life and Mechanical Properties of Steels with a Heterophase Structure // AIP Conference Proceedings. 2019. Vol. 2176. 030016. – https://doi.org/10.1063/1.5135140.
Soboleva N.N. Makarov A.V. Skorynina P.A. Nikolaeva E.P. Malyigina I.Yu. The Effect of Load during Frictional Treatment with a DBN Indenter on the Surface Finish of the NiCrBSi–Cr3C2 Laser Clad Coating // AIP Conference Proceedings. 2019. Vol. 2167. 020345. – https://doi.org/10.1063/1.5132212.
Struzhanov V.V. On One Inverse Problem in the Theory of Eigenstresses // AIP Conference Proceedings. 2019. Vol. 2176. 040015. – https://doi.org/10.1063/1.5135164.
Vladimirov A.P. Kamantsev I.S. Drukarenko N.A. Gladkovsky S.V. Bukhvalov A.B. Khudorozhkova Yu.V. Cheremicina E.R. Gorkunov E.S. Nucleation and Initiation of Cracks under High-Cycle Fatigue in the EP679 Maraging Steel // AIP Conference Proceedings. 2019. Vol. 2176. 030019. – https://doi.org/10.1063/1.5135143.
Zadvorkin S.M. Gorkunov E.S. Goruleva L.S. Putilova E. A. Maltseva A.N. Comparison of X-ray analysis and EBSD analysis methods for residual stresses estimation in welded pipes made of 13CrVA steel // AIP Conference Proceedings. 2019. Vol. 2167. 020397. – https://doi.org/10.1063/1.5132264.
Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.
Salikhyanov D.R. Contact mechanism between dissimilar materials under plastic deformation // Comptes Rendus Mecanique. 2019. Vol. 347. P. 588-600. https://doi.org/10.1016/j.crme.2019.07.002.
Emelyanov I.G. Thermodiffusion Problem of Determination of the Stress State of a Steel Shell Structure // E3S Web of Conferences. Advances in Intelligent Systems and Computing. Springer. 2019. Vol. 135. 03002. – https://doi.org/10.1051/e3sconf/201913503002.
Khalevitskiy Yu.V. Konovalov A.V. A gravitational approach to modeling the representative volume geometry of particle-reinforced metal matrix composites // Engineering with Computers. 2019. Vol. 35. Iss. 3. P. 1037-1044. https://doi.org/10.1007/s00366-018-0649-8.
Kirillova V.V. Prosviryakov E.Yu. Cardiac remodeling in patients with atrial fibrillation in chronic heart failure // Europace. March, 2019. Vol. 21. 381 p. ii 62. –DOI: https://doi.org/10.1093/europace/euz093.
Smirnov S.V. Zamaraev L.M. Comparative Study of Shot Creep of Single-Phase Titanium Alloys in Air and Neutral Gas Environment on the Test Temperature in Range from 673 to 1323 K // Frattura ed Integrita Strutturale. 2019. Iss. 49. P. 201-211. DOI: 10.3221/IGF-ESIS.49.21.
Kokovikhin E.A. Volkov V.P. Kamantsev I.S. Salikhyanov D.R. Plastometric Simulation of the Hot Rolling Process of Al/B4C Powder Composite // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 99-105. DOI: 10.18502/keg.v1i1.4396.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Makarov A.V. Investigation of Structure and Properties of High-strength Bimetallic Materials Produced иy Explosion Welding and Have Been Exploited in Arctic Climate // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 231-238. DOI 10.18502/keg.v1i1.4414.
Kazakov A.L. Kuznetsov P.A. Lempert A.A. Spevak L.F. Analytical and numerical solutions to the problem on a heat wave initiating for the nonlinear heat equation with a source // IOP Conf. Series: Journal of Physics: Conf. Series. 2019. Vol. 1268. 012030. – DOI:10.1088/1742-6596/1268/1/012030.
Emelyanov I.G. Mironov V.I. Lukashuk O.A. Phenomenon of embrittlement in titanium shells from hydrogen exposure // IOP Conf. Series: Materials Science and Engineering. 2019. Vol. 537. 022067. DOI:10.1088/1757-899X/537/2/022067.
Kazakov A.L. Spevak L.F. Lempert A.A. Nefedova O.A. A computational algorithm for constructing a two-dimensional heat wave generated by a non-stationary boundary condition // IOP Conference Series: Journal of Physics: Conference Series. 2019. Vol. 1392. 012083. – DOI:10.1088/1742-6596/1392/1/012083.
Alwan H.L. Korobov Yu.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Deviatiarov M.S. Elkind D.M. Behavior of a welded-deposited stainless steel tested at different cavitation test conditions // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012002. – DOI: 10.1088/1757-899X/681/1/012002.
Anakhov S.V. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Guzanov B.N. Matushkin A.V. Pykin Yu.A. Substantiation of the Narrow-Jet Plasma Technology for Finishing Cutting of Steel sheets // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012004. – DOI: 10.1088/1757-899X/681/1/012004.
Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. EBSD analysis of the structure of a weld joining a chromium-nickel steel sheet and a titanium alloy sheet through a copper insert // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012034. – DOI: 10.1088/1757-899X/681/1/012034.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Improving the properties of a rapidly crystallized NiCrBSi laser clad coating by high-temperature processing // Journal of Crystal Growth. 2019. Vol. 525. Art. 125200. – DOI: https://doi.org/10.1016/j.jcrysgro.2019.12520.
Pugacheva (Vandysheva) N.B. Makarov A.V. Senaeva (Pugacheva) E.I. Volkova E.G. Crystallization of Dissimilar Ti/Cu/ Steel Laser Welds // Journal of Crystal Growth. 2019. Vol. 526. Art. 125212. https://doi.org/10.1016/j.jcrysgro.2019.125212.
Savrai R.A. Malyigina I.Yu. Kolobyilin Yu.M. An Approach to Eddy-Current Evaluation of the Structural State in a Cast Aluminum–Silicon Alloy Subjected to Surface Laser Heat Treatment // Journal of Nondestructive Evaluation. 2019. Vol. 38. Is. 3. Art. 81. P. 1-7. https://doi.org/10.1007/s10921-019-0620-7.
Vladimir Vykhodets Nefedova O.A. Kurennykh Tatiana Obukhov Sviatoslav Vykhodets Yevgenia Quantum Diffusion of Deuterium in Sodium // Journal of Physical Chemistry A. 2019. Vol. 123. P. 7536-7539. DOI: 10.1021/acs.jpca.9b06231.
Kazakov A.L. Spevak L.F. Nefedova O.A. Solving a two-dimensional problem of heat wave initiation by a boundary condition specified on a movable manifold // Journal of Physics: Conf. Series. 2019. Vol. 1268. 012031. – DOI: 10.1088/1742-6596/1268/1/012031.
Gushchina N.V. Ovchinnikov V.V. Makhin'ko F.F. Vichuzhanin D.I. Effect of ion irradiation on low-cycle fatigue of pressed profiles of the V95 alloy after artificial aging // Journal of Physics: Conference Series. 2019. Vol. 1396. 012021. – DOI: 10.1088/1742-6596/1396/1/012021.
Menshakov A.I. Skorynina P.A. A new method of low-temperature cementation of stainless steel by decomposition of C2H2 in low-energy electron beam generated plasma // Journal of Physics: Conference Series. 2019. Vol. 1393. 012109. – DOI:10.1088/1742-6596/1393/1/012109.
Emelyanov I.G. Polyakov A.A. Hodak A.S. Stressed state of a steel construction working in hydrogen containing environment // Journal of Physics: Conference Series. 2019. Vol. 1391. 012027. – DOI: 10.1088/1742-6596/1391/1/012027.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Bazulin E.G. The Influence of Zero-to-Tension Loading on Magnetic and Acoustic Properties of 08G2B Hot-Rolled Steel // Journal of Physics: Conference Series. 2019. Vol. 1389. 012036. – https://doi.org/10.1088/1742-6596/1389/1/012036.
Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Improving the Quality of Transmission Shifting Transients Due to Controlling Torque Redistribution // Journal of Vibration Engineering & Technologies. 2019. DOI: 10.1007/s42417-019-00183-4.
Gladkovsky S.V. Petrova (Kuteneva) S.V. Sergeev S.N. Microstructure and mechanical properties of sandwich copper/steel composites produced by explosive welding // Materials Characterization. 2019. Vol. 154. P. 294–303. https://doi.org/10.1016/j.matchar.2019.06.008.
Krylova S.Е. Romashkov Е.V. Gladkovsky S.V. Kamantsev I.S. Special aspects of thermal treatment of steel for hot forming dies production // Materials Today: Proceedings. 2019. Vol. 19. P. 2540-2544. https://doi.org/10.1016/j.matpr.2019.08.197.
Filippov M.A. Sharapova V.A. Shveikin V.P. The effect of heat treatment on the ledeburitic class alloy abrasive wear-resistance // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 2581-2583. https://doi.org/10.1016/j.matpr.2019.08.252.
Byval’tsev S. V. The mechanism of oxide film formation for drawing titanium // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 1949-1952. https://doi.org/10.1016/j.matpr.2019.07.048.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Kolobyilin Yu.M. Effect of laser alloying with the powder mixtures of Cu–Zn–Ti and Si–Cu on the structure and properties of cast aluminum alloy // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science. 2019. Vol. 21. No. 4. P. 70–84. DOI: 10.17212/1994-6309-2019-21.4-70-84.
Skorynina P.A. Makarov A.V. Men’shakov A.I. Osinceva A.L. Effect of low-temperature carburization in electron beam plasma on the hardening and surface roughness of the metastable austenitic steel // Obrabotka Metallov-Metal Working and Material Science. 2019. Vol. 21. No. 2. P. 97–109. DOI: 10.17212/1994-6309-2019-21.2-97-109.
Korobov Yury Khudorozhkova Yu.V. Holger Hilli Vopneruk Alexander Kotelnikov Aleksandr Burov S.V. Balu Prabu Makarov A.V. Chernov Alexey The Effect of Thickness on the Properties of Laser-Deposited NiBSi-WC Coating on a Cu-Cr-Zr Substrate // Photonics. 2019. Vol. 6. 127. – DOI: 10.3390/photonics6040127.
Prokhorov A. Plekhov O. Sudakov A. Gladkovsky S.V. Petrova (Kuteneva) S.V. Experimental study of high-strength steel under VHCF with external alternating magnetic field // Procedia Structural Integrity. 2019. Iss. 18. P. 802-808. 10.1016/j.prostr.2019.08.229.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Effect of cyclic loading on the magnetic behavior of hot-rolled pipe steel 08G2B // Procedia Structural Integrity. 2019. Vol. 20. P. 4-8. 10.1016/j.prostr.2019.12.107.
Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Increasing the Quality of Transient Processes in the Vehicle Transmission // Science & Technique. 2019. Vol. 18. No. 6. P. 509-518. https://doi.org/10.21122/2227-1031-2019-18-6-509-518.
Filimonov A.Y. Trishin V.N. Model-Oriented Co-design of Homogeneous Computing Systems // VESTNIK TOMSKOGO GOSUDARSTVENNOGO UNIVERSITETA-UPRAVLENIE VYCHISLITELNAJA TEHNIKA I INFORMATIKA-TOMSK STATE UNIVERSITY JOURNAL OF CONTROL AND COMPUTER SCIENCE. 2019. No. 48. P. 67-73. DOI: 10.17223/19988605/48/8.
Koroleva (Chekhomova) L.F. Synthesis and Abrasive Properties of Nanoparticulate Modified Solid Solution of Aluminum and Iron Oxides, DOI 10.1134/50002337X19060071 // Inorganic Materials. 2019. Vol. 55, No. 6. P. 556-562.
Grokhovsky V.I. Gladkovsky S.V. Brittle fracture resistance of chinga and seymchan meteorites under static and impact loading // Meteoritics & Planetary Science. 2019. Vol. 54. Suppl. 2. – WOS: 000472113600138.
Privalova V.V. Prosviryakov E.Yu. Simonov M.A. An Exact Solution for the Description of the Gradient Flow of a Vortex Fluid // AIP Conference Proceedings. 2019. Vol. 2176. – 020012. https://doi.org/10.1063/1.5135124.
Volkov V.P. Salikhyanov D.R. On Ring Deformation be Internal Pressure // Izvestiya Ferrous Metallurgy. 2019. Vol. 62. Iss. 3. P. 195-200. DOI: 10.17073/0368-0797-2019-3-195-200.
Berezin I.M. Zalazinskiy A.G. Bykova (Gurchenko) T.M. Nesterenko A.V. Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die // PNRPU Mechanics Bulletin. 2019. No. 3. P. 5-16. DOI: 10.15593/perm.mech/2019.3.01.
Privalova V.V. Prosviryakov E.Yu. Simonov M.A. Nonlinear Gradient Flow of a Vertical Vortex Fluid in a Thin Layer // Russian Journal of Nonlinear Dynamics. 2019. Vol. 15. No. 3. P. 271-283. DOI: 10.20537/nd190306.
Fot A.P. Kamenev S.V. Krylova S.E. Tarova M.Yu. Gladkovsky S.V. Kamantsev I.S. Durability forecasting for the links plates of driving roller chains // Vestnik mashinostroeniya. 2019. № 2. P. 49-54.
Kruchkov D.I. Berezin I.M. Petunin A.A. Computer Simulation of the Stamping of a Long Sheet Blank of a Spherical Tank Element // Vestnik mashinostroeniya. 2019. № 2. P. 28-31.
Privalova V.V. Prosviryakov E.Yu. Nonlinear isobaric flow of a viscous incompressible fluid in a thin layer with permeable boundaries // Vichislitel’naya mekhanika sploshnyh sred. 2019. Vol. 12. No. 2. P. 230-242. DOI: 10.7242/1999-6691/2019.12.2.20.
Titov V.G. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Multi-Criteria Optimization by the “Ideal Point” Method of Raw Material Composition for Composite Blank Manufacturing // Izv. Vuzov Poroshk. Metallurgiya i funkts. pokrytiya. 2019. No. 2. P. 49-56. DOI dx.doi.org/10.17073/1997-308X-2019-2-49-56.
Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Partin A.S. A Concept of Decision Making for Computer-Aided Arrangement of Parts within a Forging // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2019. No. 8. P. 37-44.
Rekov A.M. Vichuzhanin D.I. Strain Distribution in the Neck of a Flat Sample of Titanium VT1-00 under Uniaxial Tension // Mekhanika kompozitsionnykh materialov i konstruktsii. 2019. Vol. 25. No. 4. P. 522-530. DOI: 10.33113/mkmk.ras.2019.25.04.522_530.05.
Blagonravov A.A. Yurkevich A.V. Ensuring the highest possible energy efficiency of cars in urban traffic // Vestnik mashinostroeniya. 2019. No. 11. P. 47-49. DOI: 10.18411/B100-22011-T20191106.
L.N. Belsky Gorkunov E.S. S.F. Deryugin Lookin N.A. Life is a Relentless Creativity. On the 100th Anniversary of the Birth of Academician N.A. Semikhatov // Vestnik Rossiiskoi akademii nauk. 2019. Vol. 89. No. 1. P. 73-82.
Korobov Yury Michael Filippov Makarov A.V. Malyigina I.Yu. Soboleva N.N. Davide Fantozzi Milanti Andrea Heli Koivuluoto and Petri Vuoristo. Arc-Sprayed Fe-Based Coatings from CoredWires for Wear and Corrosion Protection in Power Engineering. 2018. Vol. 8. No. 71. DOI: 10.3390/coatings8020071.
Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Interactive communication between the user and the computer-aided design system of shaft forging on presses. 2018. Vol. 224. 04001. DOI: https://doi.org/10.1051/matecconf/201822404001.
Prosviryakov E.Yu. New Class of Exact Solutions of Navier-Stokes Equations with Exponential Dependence of Velocity on Two Spatial Coordinates. 2018. Vol. 53. No. 1. P. 107-114. DOI: 10.1134/S0040579518060088.
Filippov M.A. Nikiforova S.M. Shveikin V.P. Sharapova V.A. Heat Treatment Forming a Dissipative Metal Base in Wear-Resistant Chromium-Alloyed Cast Iron // AIP Conference Proceedings. 2018. Vol. 2053. – 030016. – https://doi.org/10.1063/1.5084377.
Khalevitskiy Yu.V. Konovalov A.V. A gravitational approach to modeling the representative volume geometry of particle-reinforced metal matrix composites // Engineering with Computers. 2018. https://doi.org/10.1007/s00366-018-0649-8.
Kirillova V. Prosviryakov E.Yu. Diastolic dysfunction of the right ventricle as an early diagnostic marker of heart failure // European Journal of Heart Failure. 2018. Vol. 20 (Suppl. S1). P. 223-224. DOI: 10.1002/ejhf.1197.
Gorshkov A.V. Prosviryakov E.Yu. Ekman Convective Layer Flow of a Viscous Incompressible Fluid // Izvestiya. Atmospheric and Oceanic Physics. 2018. Vol. 54. – No. 2. P. 189–19. DOI: 10.7868/S0003351518020101.
Smirnov A.S. Shveikin V.P. Smirnova (Yekzemplyarova) E.O. Belozerov G. A. Konovalov A.V. Vichuzhanin D.I. Muizemnek O.Yu. Effect of Silicon Carbide Particles on the Mechanical and Plastic Properties of the AlMg6/10% SiC Metal Matrix Composite // Journal of Composite Materials. 2018. Vol. 52. Iss. 24. P. 3351–3363. DOI:10.1177/0021998318765622.
Vykhodets V.B. Nefedova O.A. Obukhov S.I. Kurennykh T.E. Danolov S.E. Vykhodets E.V. Application of the Nuclear Reaction Analysis Online Technique to Study the Diffusion of Deuterium in Metals // Journal of Experimental and Theoretical Physics Letters (JETP Letters). 2018. Vol. 107. – No. 4. P. 211-215.
Savrai R.A. Makarov A.V. Osinceva A.L. Malyigina I.Yu. Estimating the Contact Endurance of the AISI 321 Stainless Steel Under Contact Gigacycle Fatigue Tests // Journal of Materials Engineering and Performance. 2018. Vol. 27. Is. 2. P. 601-611.
Konovalov D.A. Veretennikova (Golubkova) I.A. Study on mechanical properties of a bimetallic composite produced by explosion welding under incremental plastic deformation // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 215-219. DOI: 10.22226/2410-3535-2018-2-215-219.
Veretennikova (Golubkova) I.A. Pugacheva (Vandysheva) N.B. Smirnova (Yekzemplyarova) E.O. Michurov N.S. The laser-welded joint of an austenitic corrosion-resistant steel and a titanium alloy with an intermediate copper insert // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 42-47. DOI: 10.22226/2410-3535-2018-1-42-47.
Vichuzhanin D.I. Yolshina I.A. Muradymo R.V. Nesterenko A.V. A fracture for 1 wt% aluminum-graphene metal matrix composite at 300ºC // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 2. P. 184-189. DOI: 10.22226/2410-3535-2018-2-184-189.
Vichuzhanin D.I. Smirnov S.V. Nesterenko A.V. Igumnov A.S. A fracture Locus for a 10 Volume-Percent V95/SiC Metal Matrix Composite at the Near-Solidus Temperature // Letters on Materials-Pis ma o Materialakh. 2018. Vol. 8. No. 1. P. 88-93. DOI: 10.22226/2410-3535-2018-1-88-93.
Smolyaninov A. Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Lapshin V. Survivability of the Locomotive Cabin at Interval Estimation of Obstacle Parameters // MATEC Web of Conferences. 2018. V. 216. 02021. doi.org/10.1051/matecconf/201821602021.
Gorkunov E.S. Application of Magnetoelastic Effects to the Evaluation of Elastic and Plastic Strains in Steel Structural Memebers // Matec Web of Conferences. 2018. V. 145. 05001. DOI: https://doi.org/10.1051/matecconf/201814505001.
Gorkunov E.S. Povolotskaya A.M. Pavel Nosov Zadvorkin S.M. Magnetic Flux Distribution in a Ferromagnetic Material Magnetized by U-Shaped Electromagnets of Different Geometric Dimensions Types // Matec Web of Conferences. 2018. V. 145. 05002. DOI: https://doi.org/10.1051/matecconf/201814505002.
Gorkunov E.S. Zadvorkin S.M. Povolotskaya A.M. Igor Veselov Studying the effect of elastic-plastic strain and hydrogen sulphide on the magnetic behaviour of pipe steels as applied to their testing // Matec Web of Conferences. 2018. V. 145. 05003. DOI: https://doi.org/10.1051/matecconf/201814505003.
Ogorelkov D. A. Mironov V.I. Lukashuk O. Durability of Metal Structures under Quasi-Static Load // MATEC Web of Conferences // MATEC Web of Conferences. 2018. V. 224. 02091. doi.org/10.1051/matecconf/201822402091.
Putilova E. A. Gorkunov E.S. Zadvorkin S.M. Investigation of the Structure, Phase Composition and Physical-Mechanical Characteristics of High-Strength Laminated Materials Which Contain Corrosion-Resistant Steels with High Nitrogen Content // Matec Web of Conferences. 2018. V. 145. 05004. https://doi.org/10.1051/matecconf/201814505004.
Savrai R.A. Makarov A.V. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part II: mechanical properties // Materials Science & Engineering: A. 2018. 734. P. 513-518. https://doi.org/10.1016/j.msea.2018.07.100.
Savrai R.A. Makarov A.V. Malyigina I.Yu. Volkova E.G. Effect of nanostructuring frictional treatment on the properties of highcarbon pearlitic steel. Part I: microstructure and surface properties // Materials Science & Engineering: A. 2018. 734. P. 506-512. https://doi.org/10.1016/j.msea.2018.07.099.
Kaigorodova L.I. Rasposienko D.Yu. Pushin V.G. Pilyugin V.P. Smirnov S.V. Influence of Severe Plastic Deformation on the Structure and Properties of Al-Li-Mg-Zr-Sc-Zn Alloy // Physics of Metals and Metallography. 2018. Vol. 119. – No. 2. – P. 161-168. – DOI: 10.1134/S0031918X18020060.
Tabatchikova T.I. Lepikhin S.V. Morozov A.N. Gudnev N.Z. Structure and Mechanical Properties of Steel Welding Joints Produced Using Abrasive Waterjet Cutting // Physics of Metals and Metallography. 2018. Vol. 119. – No. 7. P. 691-699.
Prosviryakov E.Yu. Spevak L.F. Layered Three-Dimensional NonUniform Viscous Incompressible Flows // Theoretical Foundations of Chemical Engineering. 2018. Vol. 52. No. 5. P. 765-770. DOI: 10.1134/S0040579518050391.
Vandyshev A.B. Kulikov V.A. Analysis of the Calculated parameters of a Model Membrane-Catalytic Converter for the Production of High-Purity Hydrogen from Methane. // Chemical and Petroleum Engineering. 2018. Vol. 54. No. 1-2. P. 31-37. DOI: 10.1007/s10556-018-0434-y.
Vandyshev A.B. Kulikov V.A. Modeling a Membrane Reformer with a Carbon-Monoxide Conversion Catalyst for Extracting High-Purity Hydrogen from Methane Steam-Conversion Products // Chemical and Petroleum Engineering. 2018. Vol. 54. Nos. 5-6. P. 313-321. DOI: 10.1007/s10556-018-0481-4.
Berdnikov K.V. Struzhanov V.V. Equilibrium State of a Softening Elastoplastic Medium with an Expanding Spherical Cavity // Journal of Applied Mechanics and Technical Physics. 2018. Vol. 59. Iss. 1. P. 104-111. DOI: 10.1134/S0021894418010133.
Grokhovsky V.I. Gladkovsky S.V. The impact mechanical tests of seymchan and chinga meteorites // Meteoritics & Planetary Science. 2018. Vol. 53. P. 6276-6276.
Smirnov S.V. Konovalov A.V. Myasnikova M.V. Khalevitskiy Yu.V. Smirnov A.S. Igumnov A.S. A Numerical Study of Plastic Strain Localization and Fracture in Al/SiC Metal Matrix Composite // Physical Mesomechanics. 2018. Vol. 21. – Iss. 4. – P. 305-313. – DOI: 10.1134/S1029959918040045.