Pugacheva (Vandysheva) N.B. Michurov N.S. Vichuzhanin D.I. Contribution of low-melting eutectics to the plastic deformation of aluminum matrix composites // AIP Conference Proceedings. 2018. Vol. 2051. 020247. https://doi.org/10.1063/1.5083490.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Makarov A.V. Trushina E.B. Vichuzhanin D.I. The Use of Intermediate Inserts for СО2 Laser Welding of Steel AISI 321 and a Grade 2 Titanium Alloy // AIP Conference Proceedings. 2018. Vol. 2053. 030055. https://doi.org/10.1063/1.5084416.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. The Diagnostics of the Influence of Elasto-Plastic Deformation on the Structure and Physical-Mechanical Properties of the High Strength Laminated Materials Used in Severe Arctic Conditions // AIP Conference Proceedings. 2018. Vol. 2051. 020248. https://doi.org/10.1063/1.5083491.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Veselov I.N. Pyshmintsev I.Y. Investigation of Structure and Properties of the Perspective High-Strength Low Alloy Steel for the Oil Country Tubular Goods Operated for Extreme Climatic Conditions // AIP Conference Proceedings. 2018. Vol. 2051. 020249. https://doi.org/10.1063/1.5083492.
Savrai R.A. Davydova (Pozdejeva) N.A. Makarov A.V. Malyigina I.Yu. Effect of Frictional Treatment on the Microstructure and Surface Properties of Low-Carbon Steel // AIP Conference Proceedings. 2018. Vol. 2053. – 040087. – https://doi.org/10.1063/1.5084525.
Savrai R.A. Makarov A.V. Analytical and Experimental Assessment of Ultimate Tensile Strength of a Hardened Layer on a Material Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030060. – https://doi.org/10.1063/1.5084421.
Senaeva (Pugacheva) E.I. Makarov A.V. Pugacheva (Vandysheva) N.B. Trushina E.B. Studying the diffusion interaction between a copper plate and steel AISI 321 under laser treatment // AIP Conference Proceedings. 2018. Vol. 2051. 020270. https://doi.org/10.1063/1.5083513.
Smirnov A.S. Khalevitskiy Yu.V. Myasnikova M.V. Simulating the Deformation Process of AlMg6/10%SiCp Composite Representative Volume under Macroscopic Uniaxial Strain // AIP Conference Proceedings. 2018. Vol. 2053. 030065. https://doi.org/10.1063/1.5084426.
Smirnov S.V. Vichuzhanin D.I. Nesterenko A.V. Kopeina A.V. A Fracture Locus for an Aluminum-Based Metal Matrix Composite at 450°С // AIP Conference Proceedings. 2018. Vol. 2053. – 020014. – https://doi.org/10.1063/1.5084360.
Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Smirnov S.V. Pestov A.V. Konovalov D.A. Adhesive Characteristics of Epoxy Glue in Relation to the Microgeometry of the Substrate Surface // AIP Conference Proceedings. 2018. Vol. 2053. – 030066. – https://doi.org/10.1063/1.5084427.
Solovei V.D. Construction of Velocity Disturbances for a Special Stationary Flow of a Viscoplastic Strip under Rolling // AIP Conference Proceedings. 2018. Vol. 2053. – 030069. – https://doi.org/10.1063/1.5084430.
Spevak L.F. Nefedova O.A. Parallel Technology for Solving the Poisson Equation in Axisymmetric Domains by the Boundary Element Method // AIP Conference Proceedings. 2018. Vol. 2053. – 030070. – https://doi.org/10.1063/1.5084431.
Struzhanov V.V. Korkin A.V. Reconstruction of a Tensile Diagram with a Falling Branch from a Pure Bending Diagram // AIP Conference Proceedings. 2018. Vol. 2053. – 030071. – https://doi.org/10.1063/1.5084432.
Volkov S.S. Struzhanov V.V. Critical Microfracture and the Safety Factor in Deformation of Structurally Heterogeneous Materials // AIP Conference Proceedings. 2018. Vol. 2053. – 040102. – https://doi.org/10.1063/1.5084540.
Vladimirov A.P. Drukarenko N.A. Kamantsev I.S. Trishin V.N. Lookin N.A. Real-time study of high-cycle fatigue damage using the averaged speckle dynamics // IOP Conf. Series: Journal of Physics: Conf. Series. 2018. Vol. 1149. 012013. DOI:10.1088/1742-6596/1149/1/012013.
Soboleva N.N. Makarov A.V. Malyigina I.Yu. NiCrBSi coating obtained by laser cladding and subsequent deformation processing // IOP Conf. Series: Journal of Physics: Conference Series. 2018. Vol. 946. 013004.
Sergeev S.N. Safarov I.M. Galeyev R.M. Gladkovsky S.V. Dvoynikov D.A. Rogozhkin S.V. Iskandarov А.А. Korznikova G.F. Analysis of the Distribution of Alloying Elements in Ultrafine-Grained Steel 05G2MFBT by Atom-Probe Tomography // IOP Conference Series: Materials Science and Engineering. 2018. Vol. 447. 012009. doi:10.1088/1757-899X/447/1/012009.
Abdulov Sergei Trusevich Ilya Volkov A.A. Ensuring the amphibious capabilities of the amphibious vehicle based on the hydrodynamic buoyancy principle // MATEC Web of Conferences. 2018. Vol. 224. 02030. https://doi.org/10.1051/matecconf/201822402030.
Abdulov Sergey Taratorkin A.I. Nenashev Pavel Dynamic loading of a water jet propulsion drive of amphibious vehicles // MATEC Web of Conferences. 2018. Vol. 224 02042 https://doi.org/10.1051/matecconf/201822402042..
Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Stability of the dynamic shifting process in the vehicle transmission with the input shaper // MATEC Web of Conferences. 2018. Vol. 211 02007 https://doi.org/10.1051/matecconf/201821102007.
Taratorkin I.A. Derzhanskii Victor Taratorkin A.I. Oscillation damping in the power unit when starting the engine equipped with the Common Rail system // MATEC Web of Conferences. 2018. Vol. 224. 02037. https://doi.org/10.1051/matecconf/201822402037.
Taratorkin I.A. Derzhanskii Victor Volkov A.A. Stabilization of transport tracked vehicle trajectory // MATEC Web of Conferences. 2018. Vol. 224. 02038. https://doi.org/10.1051/matecconf/201822402038.
Saraev Yu.N. Gladkovsky S.V. Lepikhin S.V. Kamantsev I.S. Lunev A.G. Perovskaya. Investigation of the influence of energy parameter of the covered-electrode welding on the impact strength characteristics and cracking resistance of the welded joints obtained // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science.. 2018. Vol. 20. No. 2. P. 100-115. DOI: 10.17212/1994-6309-2018-20.2-100-115.
Lenivtseva O. Tokarev A. Chakin I. Burov S.V. Khudorozhkova Yu.V. Surface Hardening of Commercially Pure Titanium by Non-vacuum Electron Beam Cladding of Powder Mixtures // Obrabotka metallov - Metal Working and Material Science. 2018. Vol. 20. Iss. 2. P. 116-129. DOI: 10.17212/1994-6309-2018-20.2-116-129.
Vladimirov A.P. Mikhailova Yu.A. Drukarenko N.A. Dynamic speckle interferometry of technical and thin biological objects // Proceedings of SPIE. 2018. Vol. 10834. Speckle 2018: VII International Conference on Speckle Metrology, 1083427. DOI: 10.1117/12.2319729.
Privalova V.V. Prosviryakov E.Yu. Couette–Hiemenz exact solutions for the steady creeping convective flow of a viscous incompressible fluid, with allowance made for heat recovery // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 3. P. 532-548. DOI: 10.14498/vsgtu1638.
Struzhanov V.V. Korkin A.V. Chaykin A.E. One approach to determination of the ultimate load-bearing capacity of mechanical systems with softening elements // VESTNIK SAMARSKOGO GOSUDARSTVENNOGO TEKHNICHESKOGO UNIVERSITETA-SERIYA-FIZIKO-MATEMATICHESKIYE NAUKI. 2018. Vol. 22. No. 4. P. 1-12. DOI: 10.14498/vsgtu1624.
Taratorkin A.I. Taratorkin I.A. Derzhanskiy V.B. Alexander V. Oscillation elimination method in transient processes of controlling the transport vehicle transmission // In Proc. of the 37th FISITA World Automotive Congress 2018. Код 142293. – 2-s2.0-85057971568.
Saraev Y.N. Gladkovsky S.V. Lunev A.G. Perovskaya M.V. Semenchuk V.M. Features of Formation of Structure and Physical and Mechanical Properties of Permanent Welded Joints of Low-Alloy Steels by Methods of Adaptive Pulse Control of Energy Parameters of Welding Mode // Materials Science Forum. 2018. Vol. 938. P. 124-131. DOI: 10.4028/www.scientific.net/MSF.938.124.
Rekov A.M. Vichuzhanin D.I. The density of deformation distribution in a plane of VT1-00 sample under uniaxial strain // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 53-60. DOI: 10.15593/perm.mech/2018.3.06.
Emelyanov I.G. Mironov V.I. A Thermodiffusion Problem of Hydrogenation of a Steel Shell Structure // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 27-35. DOI: 10.15593/perm.mech/2018.3.03.
Konovalov A.V. Kozlov A.V. Konovalov D.A. Partin A.S. Features of Stress-Strain State of Thin-Walled Circular Single-Edge-Notch Specimen under Eccentric Tension // PNRPU Mechanics Bulletin. 2018. No. 3. P. 44-52. DOI: 10.15593/perm.mech/2018.3.05.
Smirnov S.V. Kruchkov D.I. Nesterenko A.V. Berezin I.M. Vichuzhanin D.I. Experimental study of short-term transient creep of the Al/SiC metal-matrix composite under uniaxial compression // PNRPU Mechanics Bulletin. 2018. No. 4. DOI: 10.15593/perm.mech/2018.4.09.
Struzhanov V.V. Vichuzhanin D.I. A Method for Converting an Experimental Torsion Diagram for a Cylindrical Specimen to the Stress-Strain Diagram of the Material // PNRPU Mechanics Bulletin. 2018. No. 2. P. 107-113. DOI: 10.15593/perm.mech/2018.2.10.
Vichuzhanin D.I. Yolshina L.A. Smirnov A.S. Muradymov R.V. A Fracture Locus for a 2 Wt % Aluminum-Graphene Metal Matrix Composite at 300° C // PNRPU Mechanics Bulletin. 2018. Is. 3. P. 17-26. DOI: 10.15593/perm.mech/2018.3.02.
Vladimirov A.P. Ponosov Yu.S. Application of speckle dynamics and Raman light scattering to study the fracture features of pipe steel at high-cycle fatigue // PNRPU Mechanics Bulletin. 2018. No. 3. P. 138-146. DOI: 10.15593/perm.mech/2018.3.13.
Privalova V.V. Prosviryakov E.Yu. Steady convective Coutte flow for quadratic heating of the lower boundary fluid layer // Rus. J. Nonlin. Dyn. 2018. Vol. 14. No. 1. P. 69-79.
Gladkovsky S.V. Potapov A.I. Salikhyanov D.R. Rheological Properties and Substantiation of Hot Rolling Regimes of Low- and Medium Carbon Structural Steels // Solid State Phenomena. 2018. Vol. 284. P. 653-661. DOI:10.4028/www.scientific.net/SSP.284.653.
Shveikin V.P. Thermomechanical Hardening of Steels // Solid State Phenomena. 2018. Vol. 284. P. 507-512. https://doi.org/10.4028/www.scientific.net/SSP.284.507.
Brusentseva T.A. Smirnova (Yekzemplyarova) E.O. Veretennikova (Golubkova) I.A. Stydying the Influence of the Nature of the Filler on the Mechanical Properties of the Der-330 Epoxy Resin [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 27-36. DOI: 10.17804/2410-9908.2018.6.027-036.
Druzhinin A.V. Vladimirov A.P. Tsvetkova E.V. Teoretical Bases of Magnetooptical Refractometry for Transparent Media [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 83-89. DOI: 10.17804/2410-9908.2018.6.083-089.
Emelyanov I.G. Mechanics of Shells and Its Applications [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 6-28. DOI: 10.17804/2410-9908.2018.2.006-028.
Kazakov A.L. Spevak L.F. Nefedova O.A. On the Numerical-Analytical Approaches to Solving a Nonlinear Heat Conduction Equation with a Singularity [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 100-116. DOI: 10.17804/2410-9908.2018.6.100-116.
Muizemnek O.Yu. Konovalov A.V. Kanyukov S.I. Computer-Aided Intersubjective Assignment of Overlaps for Shaft-Type Forgings [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 14-23. DOI: 10.17804/2410-9908.2018.3.014-023.
Nefedova O.A. Vykhodets V.B. A Procedure for Online Investigation of Deuterium Diffusion in Materials [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 57-63. DOI: 10.17804/2410-9908.2018.5.057-063.
Nefedova O.A. Vykhodets V.B. Kurennykh T.E. A Procedure for Studying the Effect of Radiation Defects on the Diffusion Coefficients of Deuterium in Metals [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 64-73. DOI: 10.17804/2410-9908.2018.5.064-073.
Polyakov A.P. Dynamic Powder Compaction Processes [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 42-82. DOI: 10.17804/2410-9908.2018.2.042-082.
Privalova V.V. Prosviryakov E.Yu. Exact Solutions for a Couette–Hiemenz Creeping Convective Flow with Linear Temperature Distribution on the Upper Boundary [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 92-109. DOI: 10.17804/2410-9908.2018.2.092-109.
Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Trushina E.B. Malyigina I.Yu. The Structural State and Properties of a Deposited Coating for An Internal Combustion Engine Valve [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 74-85. DOI: 10.17804/2410-9908.2018.5.074-085.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Mushnikov A.N. Studying the Effect of Plastic Deformation on the Mechanical and Magnetic Characteristics of High-Strength Bimetal Materials Intended for Use in the Arctic Climate [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. ss. 6. P. 136-14. DOI: 10.17804/2410-9908.2018.6.136-148.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Davydova (Pozdejeva) N.A. Effect of the Composition of Absorbing Coatings on the Structure and Properties of a Cast Aluminum Alloy Subjected to Surface Laser Heat Treatment [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 86-105. DOI: 10.17804/2410-9908.2018.5.086-105.
Smirnov S.V. Khotinov V.A. Vichuzhanin D.I. Polukhina O.N. Farber V.M. The Digital Image Correlation Method Applied to Studyingthe Plastic Flowof the 08g2bmsteel under Tension [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 6-13. DOI: 10.17804/2410-9908.2018.3.006-013.
Smirnov S.V. Konovalov D.A. Kalashnikov S.T. Smirnova (Yekzemplyarova) E.O. Studying the Adhesion Strength and Mechanical Properties of Coatings on Aluminum-Magnesium Alloy Samples [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 5. P. 106-115. DOI: 10.17804/2410-9908.2018.5.106-115.
Solovei V.D. A Variational Principle for the Disturbances of Particle Velocities in the Flow of a Perfectly Plastic Strip under Rolling [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 2. P. 83-91. DOI: 10.17804/2410-9908.2018.2.083-091.
Zadvorkin S.M. Shveikin V.P. Kalashnikov S.T. Antenorova N.P. On the Applicability of Electromagnetic Testing Methods to Detecting Discontinuities in Steel Structures Intended for Operation in Aggressive Media Under Extreme Loads // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss. 6. P. 8-17. DOI: 10.17804/2410-9908.2018.6.008-017.
Zalazinskiy A.G. Kruchkov D.I. Titov V.G. Application of the Pareto Criterion to Selecting the Optimal Composition of the Charge Material for the Manufacture of a Composite Blank [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. 2018. Iss.3. P. 33-42. DOI: 10.17804/2410-9908.2018.3.033-042.
Kazakov A.L. Kuznetsov P.A. Spevak L.F. On a Three-Dimensional Heat Wave Generated by Boundary Condition Specified on a Time-Dependent Manifold // Izvestiya Irkutskogo gosudarstvennogo universiteta. Seriya: Matematika. 2018. Vol. 26. P. 16-33.
Kruchkov D.I. Zalazinskiy A.G. Romanova O.V. Nesterenko A.V. Smirnova (Yekzemplyarova) E.O. Determination of parameters for the plasticity model of VT-22 alloy powder particles // Izvestiya vysshikh uchebnykh zavedenii. Poroshkovaya metallurgiya i funktsional'nye pokrytiya. 2018. No. 2. P. 4-12. DOI: 10.17073/1997-308X-2018-2-4-12.
Rozhkova E.A. Gorshkov A.V. Prosviryakov E.Yu. Layered Marangoni Convection during Heat Transfer According to the Newton’s Law of Cooling. Part 1. Investigation of the Velocity Field // Khimicheskaya fizika i mezoskopiya. 2018. Vol. 20. No. 1. P. 15-27. DOI:10.20537/nd1801007.
Polyakov P.A. Polyakov A.P. Influence of Small Additives on Extrusion of Workpieces from Powder Composites based on Iron // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2018. No. 7. P. 28-34.
Guryanov G.N. Smirnov S.V. Problemy chernoi metallurgii i materialovedeniya Influence of the contact friction on the stressed state and allowable stress of backward pullin the course // Problemy chernoi metallurgii i materialovedeniya. 2018. No. 1. P. 5-14.
Guryanov G.N. Smirnov S.V. Drawing conditions of round solid profile without axial stress increment because of back tension action // Technologiya metallov. 2018. No. 9. P. 3-12. DOI: 10.31044/1684-2499-2018-9-3-12.
Guryanov G.N. Smirnov S.V. Influence of curve shape of strain hardening on drawing stress and safety factor of round solid profile // Technologiya metallov. 2018. No. 2. P. 13-24.
Guryanov G.N. Smirnov S.V. On development of energy-saving conditions of solid round profile drawing // Technologiya metallov. 2018. No. 7. P. 9-20. DOI: 10.31044/1684-2499-2018-7-9-20.
Guryanov G.N. Smirnov S.V. Influence of the intensitivity of simple strength and size of the work confusion of fiber on axial voltage, stability of strength and growth of medium temperature in the drawing line of wire // Uprochnyayushchie tekhnologii i pokrytiya. 2018. Vol. 14. No. 3 (159). P. 99-106.
Churbaev R.V. Fedotov V.P. Cheremicina E.R. High ductility of magnesium at different styrain rates under pressure // Voprosy materialovedeniya. 2018. No. 1. P. 27-34.
Churbaev R.V. Vichuzhanin D.I. A Device for Measuring the Torque upon Loading the Substance by the method of P.W. Bridgman // Zavodskaya laboratoriya. Diagnostika materialov. 2018. Vol. 84. No. 4. P. 66-70. DOI: 10.26896/1028-6861-2018-84-4-66-70.
Mushnikov A.N. Kryucheva K. Modeling of Magnetic Hysteresis under Weak Magnetic Fields and Triaxial Stress State // International Scientific Journal “Mathematical Modeling”. 2018. Year II. – Issue 3. P. 102-104.
Konovalov D.A. Veretennikova (Golubkova) I.A. STUDY ON MECHANICAL PROPERTIES OF A BIMETALLIC COMPOSITE PRODUCED BY EXPLOSION WELDING UNDER INCREMENTAL PLASTIC DEFORMATION Письма о материалах . DOI: 10.22226/2410-3535-2018-2-215-219. 2018. Vol. 8. № 2 (30). P. 215-219.
Loginov Yu.N. Babaylov N.A. Polyanskii L.I. Effect of the Precompaction Pressure on the Density Distribution in a Metallurgical Briquette during Roller Pressing // Metallurgist. 2017. Vol. 61. No. 9-10. P. 849-852. DOI 10.1007/s11015-018-0574-5.
Vandyshev A.B. Kulikov V.A. Estimate of High-Purity Hydrogen Production Efficiency in Membrane-Catalytic-Systems from Reforming Products of Gasoline, Kerosene, and Diesel Oil // Chemical and Petroleum Engineering. 2017. Vol. 53. No. 9-10. P. 592-597. DOI: 10.1007/s10556-018-0386-2.
Gorkunov E.S. Димитров Р.З. Миховски М.М. Магнитна дефектоскопия, структуроскопия, фазометрия / Национально научно-техническо дружество по дефектоскопия. Болгария, София, 2017. 241 p. ISBN: 978-619-90662-1-8.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Subachev Yu.V. Peculiarities of the Magnetic Behavior of Pipe Steels with Different Initial Stress-Strain States under Elastic Deformation // Dynamics and Control of Advanced Structures and Machines. – Chapter 17. – P. 153-160. – DOI 10.1007/978-3-319-43080-5_17. – ISBN 978-3-319-43079-9 ISBN 978-3-319-43080-5 (eBook). – Publisher: Springer International Publishing Switzerland 2017. – Editors: Alexander K. Belyaev, Hans Irschik, Michael Kromme. – Belyaev, A. K., Irschik, Hans, Krommer, Michael (Eds.). 2017. 235 p. Full text>>
Vladimirov A.P. Alexey A. Bakharev Dynamic Speckle Interferometry of Thin Biological Objects: Theory, Experiments and Practical Perspectives // Optical Interferometry. – Chapter 6. – P. 103-141. – http://dx.doi.org/chapter/10.5772/66712. – http://dx.doi.org/chapter/10.5772/63683. – Publisher: INTECH, 2017. – Edited by Alexander A. Banishev, Mithun Bhowmick and Jue Wang. – Belyaev, A. K., Irschik, Hans, Krommer, Michael (Eds.), Print ISBN: 978-953-51-2955-4. Online ISBN: 978-953-51-2956-1. 2017. 249 p.
Koroleva (Chekhomova) L.F. Dobrinskaya M.N. Kamantsev I.S. Doped calcium carbonate-phosphate used for bone tissue technology // Integrative Clinical Medicine, ISSN: 2515-0219, doi: 10.15761/ICM.1000108. 2017. V. 1(2). P. 1-7.
Polyakov P.A. A.V. Dolmatov Kolmyikov V.L. O.V. Romanova M.N. Zakharov Effect of Sintering on the Strength of Iron-Based Powder Composites [Electronic resource] – DOI: 10.17804/2410-9908.2017.1.013-023. // Diagnostics, Resource and Mechanics of materials and structures. 2017. Iss. 1. P. 13-23.
Yu.N. Saraev Gladkovsky S.V. S.V. Lepkhin Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of Welding Technology on Structure, Mechanical Properties and Fracture Toughness of 09G2S Steel Welded Joints [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. –DOI: 10.17804/2410-9908.2017.5.023-042. 2017. Iss. 5. P. 23-42.
Pugacheva (Vandysheva) N.B. Malyigina I.Yu. Michurov N.S. Pugacheva E.I. Antenorova N.P. Effect of Heat Treatment on the Structure and Phase Composition of Aliminum Matrix Composites Containing Silicon Carbide [Electronic resource] // Diagnostics, Resource and Mechanics of materials and structures. – DOI: 10.17804/2410-9908.2017.6.028-036. 2017. Iss. 6. P. 28-36.
Aleksandr Blokhin Arcadiy Nedyalkov Lev Barakhatov Taratorkin A.I. Abram Kropp Multistage Mechanical Transmissions with Automatic Control for Advanced Trucks and Buses . – DOI 10.1515/ama-2017-0040 // Acta Mechanica et Automatica. 2017. Vol. 11. – No. 4. P. 260-266.
Berezin I.M. Nesterenko A.V. Zalazinskiy A.G. George Kovacs Influence of Stress State Conditions on Densification Behavior of Titanium Sponge // Acta Polytechnica Hungarica. 2017. Vol. 14. – No. 6. P. 153-168.
Yu.S. Korobov S.V. Nevezhin M.A. Filiрpov Makarov A.V. Malyigina I.Yu. D. Fantozzi A. Milanti H. Koivuluoto P. Vuoristo Properties of Arc-Sprayed Coatings from Fe-based Cored Wires for High-Temperature Applications // AIP Conf. Proc. 2017. Vol. 1915. – 020004. Full text>>
Yu.N. Loginov A.E. Pervukhin Babaylov N.A. Evolution of Surface Defects in Platinum Alloy Wire under Drawing // AIP Conf. Proc. 2017. Vol. 1915. – 040032. Full text>>
E.N. Shipacheva A.A. Petunin Berezin I.M. A Genetic Algorithm Used for Solving One Optimization Problem // AIP Conf. Proc. 2017. Vol. 1915. – 040052. Full text>>
Yu.N. Loginov Babaylov N.A. L.I. Polyansky The Properties of Coke Breeze Briquettes Produced by Ram Briquetting // AIP Conf. Proc. 2017. Vol. 1915. – 040034. Full text>>
Yu.N. Saraev Gladkovsky S.V. Lepikhin S.V. Dvoynikov D.A. Kamantsev I.S. Veselova V.E. Influence of the Welding Method on the Impact Strength and Cyclic Fracture Toughness Parameters of the 09G2S Steel // AIP Conf. Proc. 2017. Vol. 1915. – 030024. Full text>>
Agapitova O.Yu. Byval’tsev S. V. Zalazinskiy A.G. Mathematical Modeling of Hydromechanical Extrusion // AIP Conf. Proc. 2017. Vol. 1915. – 040001. Full text>>
Belozerov G. A. Smirnov A.S. Konovalov A.V. Muizemnek O.Yu. A.V. Perminova Effect of Strain Rate on the Formation of the Microstructure of a 1950/10% SiC Metal Matrix Composite under High Temperature // AIP Conf. Proc. 2017. Vol. 1915. – 030002. Full text>>
Berezin I.M. Polyakov A.P. Polyakov P.A. Research of the Stress-Strain State of Rods Obtained by Porous Blank Extrusion // AIP Conf. Proc. 2017. Vol. 1915. – 030003. Full text>>
Burmasheva N.V. Prosviryakov E.Yu. Exact Solution for the Layered Convection of a Viscous Incompressible Fluid at Specified Temperature Gradients and Tangential Forces on the Free Boundary // AIP Conf. Proc. 2017. Vol. 1915. – 040005. Full text>>
Emelyanov I.G. Mironov V.I. Kuznetsov A.V. Evaluating the Effect of Damping Structures in the Design of a Locomotive Cab during a Collision // AIP Conf. Proc. 2017. Vol. 1915. – 040011. Full text>>
Gladkovsky S.V. Kamantsev I.S. Petrova (Kuteneva) S.V. Veselova V.E. M.A. Ryzhkov The Thermal Expansion and Thermophysical Properties of an Aluminum and Al/B4C composite // AIP Conf. Proc. 2017. Vol. 1915. – 030005. Full text>>
Gorkunov E.S. Evaluating Structural and Phase Changes in Individual Layers of Multilayer Products with the use of Differential Magnetic Permeability // AIP Conf. Proc. 2017. Vol. 1915. – 020002. Full text>>
Gorkunov E.S. E.I. Yakushenko Zadvorkin S.M. Mushnikov A.N. Analytical Description of Changes in the Magnetic States of Chromium-Nickel Steel under Uniaxial Elastic Deformation // AIP Conf. Proc. 2017. Vol. 1915. – 040018. Full text>>
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Differential Evaluation of the Magnetic State of Wire Packages // AIP Conf. Proc. 2017. Vol. 1915. – 040017. Full text>>
Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Specific Features of the Determination of Residual Stresses in Materials by Diffraction Techniques // AIP Conf. Proc. 2017. Vol. 1915. – 030006. Full text>>
Gorshkov A.V. Prosviryakov E.Yu. Complex Large-Scale Convection of a Viscous Incompressible Fluid with Heat Exchange According to Newton’s Law // AIP Conf. Proc. 2017. Vol. 1915. – 040019. Full text>>
Gorshkov A.V. Prosviryakov E.Yu. Convective Flow in the Solid Rotation of a Viscous Incompressible Fluid // AIP Conf. Proc. 2017. Vol. 1915. – 040020. Full text>>
Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Intersubjective Decision-Making for Computer-Aided Forging Technology Design // AIP Conf. Proc. 2017. Vol. 1915. – 040022. Full text>>
Kazakov A.L. A.A. Lempert P.A. Kuznetsov On the Analytic Solvability of a Special Boundary Value Problem for the Nonlinear Heat Equation // AIP Conf. Proc. 2017. Vol. 1915. – 020003. Full text>>
