Lezhnin N.V. Makarov A.V. Luchko S.N. The effect of ultrasonic impact-frictional treatment on the surface roughness and hardening of 09Mn2Si constructional steel // Letters on Materials. 2019. Vol. 9. No. 3. P. 310-315. https://doi.org/10.22226/2410-3535-2019-3-310-315.
Makarov A.V. Korobov Yu.S. Soboleva N.N. Khudorozhkova Yu.V. Vopneruk A.A. Balu P. Barbosa M.M. Malyigina I.Yu. Burov S.V. Stepchenkov A.K. Wear-resistant nickel-based laser clad coatings for high-temperature applications // Letters on Materials. 2019. Vol. 9. No. 4. P. 470-474. https://doi.org/10.22226/2410-3535-2019-4-470-474.
Petrova (Kuteneva) S.V. Gladkovsky S.V. Dvoynikov D.A. Sergeev S.N. Microstructure and brittle fracture resistance of layered steel composites produced by explosion welding and pack rolling followed by heat treatment // Letters on Materials. 2019. Vol. 9. No. 4. P. 442-446. https://doi.org/10.22226/2410-3535-2019-4-442-446.
Zamaraev L.M. Short-term high-temperature creep of Grade 5 titanium alloy heated in air and argon // Letters on Materials. 2019. Vol. 9. No. 3. P. 294-298. https://doi.org/10.22226/2410-3535-2019-3-294-298.
Smirnov S.V. Veretennikova (Golubkova) I.A. Fomin V.M. Filippov A.A. Brusentseva T.A. Studying the Viscoelastic Properties of an Epoxy Resin Strengthened with Silicon Dioxide Nanoparticles by Instrumented Microindentation // Mechanics of Composite Materials. 2019. Vol. 55. No. 3. P. 337-348. DOI: 10.1007/s11029-019-09816-x.
Vladimirov A.P. Kamantsev I.S. Drukarenko N.A. Trishin V.N. Akashev L.A. Druzhinin A.V. Assessing Fatigue Damage in Organic Glass Using Optical Methods // Optics and Spectroscopy. 2019. Vol. 127. Iss. 5. P. 943-953. DOI: https://doi.org/10.1134/S0030400X19110286.
Kaigorodova L.I. Rasposienko D.Y. Pushin V.G. Pilyugin V.P. Smirnov S.V. Effect of Annealing on the Structure and Properties of the Aging Al-Li-Cu-Mg-Zr-Sc-Zn Alloy Subjected to Megaplastic Strain // Physics of Metals and Metallography. 2019. Vol. 120. No. 2. P. 157–163. DOI: 10.1134/S0031918X19020066.
Makarov A.V. Korshunov L.G. Metallophysical Foundations of Nanostructuring Frictional Treatment of Steels // Physics of Metals and Metallography. 2019. Vol. 120. No. 3. P. 303–311. DOI: 10.1134/S0031918X18120128.
Pugacheva (Vandysheva) N.B. Nikolin Yu.V. Senaeva (Pugacheva) E.I. Malyigina I.Yu. Structure of Fe-Ni-Ti-C-B SHS Copmposites // Physics of Metals and Metallography. 2019. Vol. 120. No. 11. P. 1078-1084. DOI: 10.1134/S0031918X19110139.
Pugacheva (Vandysheva) N.B. Senaeva (Pugacheva) E.I. Goruleva L.S. Makarov A.V. Volkova E.G. Microstructure of a Laser-Welded Joint between a Chromium – Nickel Steel and a Titanium Alloy with a Copper Insert // Physics of Metals and Metallography. 2019. Vol. 120. No. 8. P. 775-781. DOI: 10.1134/S0031918X1908012X.
Prosviryakov E.Yu. Non-helical exact solutions to the Euler equations for swirling axisymmetric fluid flows // Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.].. 2019. Vol. 23. No. 4. P. 1–7. https://doi.org/10.14498/vsgtu1715.
Burmasheva N.V. Prosviryakov E.Yu. Convective layered flows of a vertically whirling viscous incompressible fluid. Velocity field investigation // Vestnik Samarskogo Gosudarstvennogo Tekhnicheskogo Universiteta, Seriya Fiziko-Matematicheskie Nauki. 2019. Vol. 23. No. 2. P. 341-360. DOI: 10.14498/vsgtu1670.
Vandyshev A.B. Kulikov V.A. Analysis of Membrane and Membrane-Catalytic Systems for Producing High-Purity Hydrogen from Ammonia // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 1-2. P. 43-50. DOI: 10.1007/s10556-019-00581-1.
Vandyshev A.B. Kulikov V.A. Analysis of the Design Calculation of a Membrane-Catalytic Converterf or Producing High-Purity Hydrogenf rom Biodiesel Fuel // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 3-4. P. 209-215. DOI: 10.1007/s10556-019-00607-8.
Vandyshev A.B. Kulikov V.A. Analysis of the Efficiency of a Pd/Ag Membrane with a Thickness of 2.25 Microns on a Porous Ceramic Substrate in a laboratory Membrane Reactor // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 1-2. P. 31-37. DOI: 10.1007/s10556-019-00592-y.
Vandyshev A.B. Kulikov V.A. Analysis of the results of testing an individual disk-type membrane-catalytic module for obtaining high-purity hydrogen from methane // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 9-10. P. 725-732. DOI: 10.1007/s10556-020-00686-y.
Vandyshev A.B. Kulikov V.A. Evaluation of design parameters for a 32-module disk-type membrane-catalytic reactor for producing high-purity hydrogen from diesel fuel // Chemical and Petroleum Engineering. 2019. Vol. 55. No. 9-10. P. 815-820. DOI: 10.1007/s10556-020-00698-8.
Zubarev N.M. Prosviryakov E.Yu. Exact Solutions for the Layered Three-Dimensional Nonstationary Isobaric Flows of Viscous Incompressible Fluid // Journal of Applied Mechanics and Technical Physics. 2019. Vol. 60. No. 6.. 10.1134/S0021894419060075.
Farber V.M. Polukhina O.N. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. A Study of Plastic Deformation of 08G2B Steel before and at the Yield Plateau by Digital Image Correlation Technique. Part 1. Formation of Plastic and Elastic Deformation Waves // Metal Science and Heat Treatment. 2019. Vol. 61. Nos. 5-6. P. 274-279. DOI: 10.1007/s11041-019-00416-z.
Farber V.M. Polukhina O.N. Vichuzhanin D.I. Khotinov V.A. Smirnov S.V. A Study of Plastic Strain before and on the Yield Plateau of Steel 08G2B by Correlation of Digital Images. Part II. Functioning of Flow Channels and Zones in Them // Metal Science and Heat Treatment. 2019. Vol. 61. Nos. 7-8. P. 405-410. DOI 10.1007/s11041-019-00437-8.
Makarov A.V. Skorynina P.A. Volkova E.G. Osinceva A.L. Effect of frictional treatment on structure, micromechanical and tribological properties of 03Cr16Ni14Mo3Ti austenitic steel // Metal Science and Heat Treatment. 2019. No. 11-12.
Zalazinskiy A.G. Nesterenko A.V. Berezin I.M. Study of Compaction of the Titanium Powder by the Experimental-Analytical Method // Russian Journal of Non-Ferrous Metals. 2019. Vol. 60. No. 5. P. 499-503. https://dx.doi.org/10.3103/S1067821219050183.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Bazulin E.G. Vopilkin A.Kh. Some Featuresinthe Behavior of Magnetic and Acoustic Characteristics of Hot-Rolled 08G2B Steelunder Cyclic Loading // Russian Journal of Nondestructive Testing. 2019. Vol. 55. No. 11. P. 827–836. DOI: 10.1134/S1061830919110044.
Gorkunov E.S. Zadvorkin S.M. Goruleva L.S. Comparison of Magnetic Parameters of Quenched Pipe Steels with X-Ray–Evaluated Residual Macro- and Microstresses // Russian Journal of Nondestructive Testing. 2019. No. 5. P. 369-377. DOI: 10.1134/S1061830919050048.
Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.
Polilov A.N. Tatus N.A. Kamantsev I.S. Kuznetsov A.V. Akhmedshin E.Kh. Tian X. Reducing the Effect of Holes on the Bearing Capacity of Fiber-Reinforced Materials // AIP Conference Proceedings. 2019. Vol. 2176. 030010. – https://doi.org/10.1063/1.5135134.
Babaylov N.A. Bogachev A.E. Korotkih S.A. Nefedova O.A. Spevak L.F. A BEM-Based Mathematical Model of the Human Cornea Stress-Strain State // AIP Conference Proceedings. 2019. Vol. 2176. 030001. – https://doi.org/10.1063/1.5135125.
Burmasheva N.V. Larina E.A. Prosviryakov E.Yu. Unidirectional Convective Flows of a Viscous Incompressible Fluid with Slippage in a Closed Layer // AIP Conference Proceedings. 2019. Vol. 2176. 030023. – https://doi.org/10.1063/1.5135147.
Burmasheva N.V. Prosviryakov E.Yu. Unidirectional Thermocapillary Flows of a Viscous Incompressible Fluid with the Navier Boundary Condition // AIP Conference Proceedings. 2019. Vol. 2176. 030002. –https://doi.org/10.1063/1.5135126.
Byval’tsev S. V. Zalazinskiy A.G. Shveikin V.P. An Intelligent System for Improving the Process of Hydromechanical Extrusion // AIP Conference Proceedings. 2019. Vol. 2176. 030003. –https://doi.org/10.1063/1.5135127.
Emelyanov I.G. Mironov V.I. Hodak A.S. The Boundary Value Problem of Determining Hydrogen Concentration and the Stress State in a Titanium Shell // AIP Conference Proceedings. 2019. Vol. 2176. 030005. –https://doi.org/10.1063/1.5135129.
Kazakov A.L. Spevak L.F. Numerical Study of Travelling Wave Type Solutions for the Nonlinear Heat Equation // AIP Conference Proceedings. 2019. Vol. 2176. 030006. – https://doi.org/10.1063/1.5135130.
Klimova O.V. A Methodology for Parallel Implementation of the Basic Operations of Digital Signal Processing // AIP Conference Proceedings. 2019. Vol. 2176. 030007. – https://doi.org/10.1063/1.5135131.
Koroleva (Chekhomova) L.F. Prosviryakov E.Yu. Models of Matter Self-Organization in Dissipative Kinetic Processes for Obtaining an Active Biomaterial with Transdermal Ability to Restore and Strengthen Bone Tissue // AIP Conference Proceedings. 2019. Vol. 2176. 030008. – https://doi.org/10.1063/1.5135132.
Lookin N.A. Rubin L.S. Precision Nonlinear Low Current Meter // AIP Conference Proceedings. 2019. Vol. 2176. 020003. – https://doi.org/10.1063/1.5135115.
Polyakov P.A. Polyakov A.P. The Effect of Zn, Cu, and C Alloying Microadditives on the Process of Compaction of Iron-Based Powders // AIP Conference Proceedings. 2019. Vol. 2176. 030011. – https://doi.org/10.1063/1.5135135.
Privalova V.V. Prosviryakov E.Yu. An Inhomogeneous Couette-Type Flow with a Perfect Slip Condition at the Lower Boundary of an Infinite Fluid Layer // AIP Conference Proceedings. 2019. Vol. 2176. 030012. – https://doi.org/10.1063/1.5135136.
Privalova V.V. Prosviryakov E.Yu. Convective Couette-Type Flows Under Condition of Slip and Heating at the Lower Boundary // AIP Conference Proceedings. 2019. Vol. 2176. 030024. – https://doi.org/10.1063/1.5135148.
Privalova V.V. Prosviryakov E.Yu. Exact Solution of the Convective Flow of a Viscous Fluid Layer with a Heated Lower Boundary // AIP Conference Proceedings. 2019. Vol. 2176. 030022. – https://doi.org/10.1063/1.5135146.
Pugacheva (Vandysheva) N.B. NikolinYu.V. Senaeva (Pugacheva) E.I. The Structure and Wear Resistance of a Ti-Ni-Fe-C-B Composite // AIP Conference Proceedings. 2019. Vol. 2176. 020007. – https://doi.org/10.1063/1.5135119.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Veselov I.N. Pyshmintsev I.Y. Investigation of Structure and Properties of Low-Carbon Low-Alloyed Cr-Mo Pipe Steel Intended for Operating in Sour Environment // AIP Conference Proceedings. 2019. Vol. 2167. 020291. – https://doi.org/10.1063/1.5132158.
Shveikin V.P. Evaluation of the Residual Life and Mechanical Properties of Steels with a Heterophase Structure // AIP Conference Proceedings. 2019. Vol. 2176. 030016. – https://doi.org/10.1063/1.5135140.
Soboleva N.N. Makarov A.V. Skorynina P.A. Nikolaeva E.P. Malyigina I.Yu. The Effect of Load during Frictional Treatment with a DBN Indenter on the Surface Finish of the NiCrBSi–Cr3C2 Laser Clad Coating // AIP Conference Proceedings. 2019. Vol. 2167. 020345. – https://doi.org/10.1063/1.5132212.
Struzhanov V.V. On One Inverse Problem in the Theory of Eigenstresses // AIP Conference Proceedings. 2019. Vol. 2176. 040015. – https://doi.org/10.1063/1.5135164.
Vladimirov A.P. Kamantsev I.S. Drukarenko N.A. Gladkovsky S.V. Bukhvalov A.B. Khudorozhkova Yu.V. Cheremicina E.R. Gorkunov E.S. Nucleation and Initiation of Cracks under High-Cycle Fatigue in the EP679 Maraging Steel // AIP Conference Proceedings. 2019. Vol. 2176. 030019. – https://doi.org/10.1063/1.5135143.
Zadvorkin S.M. Gorkunov E.S. Goruleva L.S. Putilova E. A. Maltseva A.N. Comparison of X-ray analysis and EBSD analysis methods for residual stresses estimation in welded pipes made of 13CrVA steel // AIP Conference Proceedings. 2019. Vol. 2167. 020397. – https://doi.org/10.1063/1.5132264.
Zamaraev L.M. Short-Term Creep Rate of the Ti-5-1 Titanium Alloy in Air and Hydrogen Environments at High Temperatures // AIP Conference Proceedings. 2019. Vol. 2176. 030020. – https://doi.org/10.1063/1.5135144.
Salikhyanov D.R. Contact mechanism between dissimilar materials under plastic deformation // Comptes Rendus Mecanique. 2019. Vol. 347. P. 588-600. https://doi.org/10.1016/j.crme.2019.07.002.
Emelyanov I.G. Thermodiffusion Problem of Determination of the Stress State of a Steel Shell Structure // E3S Web of Conferences. Advances in Intelligent Systems and Computing. Springer. 2019. Vol. 135. 03002. – https://doi.org/10.1051/e3sconf/201913503002.
Khalevitskiy Yu.V. Konovalov A.V. A gravitational approach to modeling the representative volume geometry of particle-reinforced metal matrix composites // Engineering with Computers. 2019. Vol. 35. Iss. 3. P. 1037-1044. https://doi.org/10.1007/s00366-018-0649-8.
Kirillova V.V. Prosviryakov E.Yu. Cardiac remodeling in patients with atrial fibrillation in chronic heart failure // Europace. March, 2019. Vol. 21. 381 p. ii 62. –DOI: https://doi.org/10.1093/europace/euz093.
Smirnov S.V. Zamaraev L.M. Comparative Study of Shot Creep of Single-Phase Titanium Alloys in Air and Neutral Gas Environment on the Test Temperature in Range from 673 to 1323 K // Frattura ed Integrita Strutturale. 2019. Iss. 49. P. 201-211. DOI: 10.3221/IGF-ESIS.49.21.
Kokovikhin E.A. Volkov V.P. Kamantsev I.S. Salikhyanov D.R. Plastometric Simulation of the Hot Rolling Process of Al/B4C Powder Composite // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 99-105. DOI: 10.18502/keg.v1i1.4396.
Putilova E. A. Zadvorkin S.M. Gorkunov E.S. Makarov A.V. Investigation of Structure and Properties of High-strength Bimetallic Materials Produced иy Explosion Welding and Have Been Exploited in Arctic Climate // In XIX International Scientific-Technical Conference “The Ural School-Seminar of Metal Scientists-Young Researchers”. KnE Engineering. 2019. P. 231-238. DOI 10.18502/keg.v1i1.4414.
Kazakov A.L. Kuznetsov P.A. Lempert A.A. Spevak L.F. Analytical and numerical solutions to the problem on a heat wave initiating for the nonlinear heat equation with a source // IOP Conf. Series: Journal of Physics: Conf. Series. 2019. Vol. 1268. 012030. – DOI:10.1088/1742-6596/1268/1/012030.
Emelyanov I.G. Mironov V.I. Lukashuk O.A. Phenomenon of embrittlement in titanium shells from hydrogen exposure // IOP Conf. Series: Materials Science and Engineering. 2019. Vol. 537. 022067. DOI:10.1088/1757-899X/537/2/022067.
Kazakov A.L. Spevak L.F. Lempert A.A. Nefedova O.A. A computational algorithm for constructing a two-dimensional heat wave generated by a non-stationary boundary condition // IOP Conference Series: Journal of Physics: Conference Series. 2019. Vol. 1392. 012083. – DOI:10.1088/1742-6596/1392/1/012083.
Alwan H.L. Korobov Yu.S. Soboleva N.N. Lezhnin N.V. Makarov A.V. Deviatiarov M.S. Elkind D.M. Behavior of a welded-deposited stainless steel tested at different cavitation test conditions // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012002. – DOI: 10.1088/1757-899X/681/1/012002.
Anakhov S.V. Pugacheva (Vandysheva) N.B. Bykova (Gurchenko) T.M. Guzanov B.N. Matushkin A.V. Pykin Yu.A. Substantiation of the Narrow-Jet Plasma Technology for Finishing Cutting of Steel sheets // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012004. – DOI: 10.1088/1757-899X/681/1/012004.
Pugacheva (Vandysheva) N.B. Michurov N.S. Senaeva (Pugacheva) E.I. EBSD analysis of the structure of a weld joining a chromium-nickel steel sheet and a titanium alloy sheet through a copper insert // IOP Conference Series: Materials Science and Engineering. 2019. Vol. 681. 012034. – DOI: 10.1088/1757-899X/681/1/012034.
Makarov A.V. Soboleva N.N. Malyigina I.Yu. Improving the properties of a rapidly crystallized NiCrBSi laser clad coating by high-temperature processing // Journal of Crystal Growth. 2019. Vol. 525. Art. 125200. – DOI: https://doi.org/10.1016/j.jcrysgro.2019.12520.
Pugacheva (Vandysheva) N.B. Makarov A.V. Senaeva (Pugacheva) E.I. Volkova E.G. Crystallization of Dissimilar Ti/Cu/ Steel Laser Welds // Journal of Crystal Growth. 2019. Vol. 526. Art. 125212. https://doi.org/10.1016/j.jcrysgro.2019.125212.
Savrai R.A. Malyigina I.Yu. Kolobyilin Yu.M. An Approach to Eddy-Current Evaluation of the Structural State in a Cast Aluminum–Silicon Alloy Subjected to Surface Laser Heat Treatment // Journal of Nondestructive Evaluation. 2019. Vol. 38. Is. 3. Art. 81. P. 1-7. https://doi.org/10.1007/s10921-019-0620-7.
Vladimir Vykhodets Nefedova O.A. Kurennykh Tatiana Obukhov Sviatoslav Vykhodets Yevgenia Quantum Diffusion of Deuterium in Sodium // Journal of Physical Chemistry A. 2019. Vol. 123. P. 7536-7539. DOI: 10.1021/acs.jpca.9b06231.
Kazakov A.L. Spevak L.F. Nefedova O.A. Solving a two-dimensional problem of heat wave initiation by a boundary condition specified on a movable manifold // Journal of Physics: Conf. Series. 2019. Vol. 1268. 012031. – DOI: 10.1088/1742-6596/1268/1/012031.
Gushchina N.V. Ovchinnikov V.V. Makhin'ko F.F. Vichuzhanin D.I. Effect of ion irradiation on low-cycle fatigue of pressed profiles of the V95 alloy after artificial aging // Journal of Physics: Conference Series. 2019. Vol. 1396. 012021. – DOI: 10.1088/1742-6596/1396/1/012021.
Menshakov A.I. Skorynina P.A. A new method of low-temperature cementation of stainless steel by decomposition of C2H2 in low-energy electron beam generated plasma // Journal of Physics: Conference Series. 2019. Vol. 1393. 012109. – DOI:10.1088/1742-6596/1393/1/012109.
Emelyanov I.G. Polyakov A.A. Hodak A.S. Stressed state of a steel construction working in hydrogen containing environment // Journal of Physics: Conference Series. 2019. Vol. 1391. 012027. – DOI: 10.1088/1742-6596/1391/1/012027.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Bazulin E.G. The Influence of Zero-to-Tension Loading on Magnetic and Acoustic Properties of 08G2B Hot-Rolled Steel // Journal of Physics: Conference Series. 2019. Vol. 1389. 012036. – https://doi.org/10.1088/1742-6596/1389/1/012036.
Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Improving the Quality of Transmission Shifting Transients Due to Controlling Torque Redistribution // Journal of Vibration Engineering & Technologies. 2019. DOI: 10.1007/s42417-019-00183-4.
Gladkovsky S.V. Petrova (Kuteneva) S.V. Sergeev S.N. Microstructure and mechanical properties of sandwich copper/steel composites produced by explosive welding // Materials Characterization. 2019. Vol. 154. P. 294–303. https://doi.org/10.1016/j.matchar.2019.06.008.
Krylova S.Е. Romashkov Е.V. Gladkovsky S.V. Kamantsev I.S. Special aspects of thermal treatment of steel for hot forming dies production // Materials Today: Proceedings. 2019. Vol. 19. P. 2540-2544. https://doi.org/10.1016/j.matpr.2019.08.197.
Filippov M.A. Sharapova V.A. Shveikin V.P. The effect of heat treatment on the ledeburitic class alloy abrasive wear-resistance // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 2581-2583. https://doi.org/10.1016/j.matpr.2019.08.252.
Byval’tsev S. V. The mechanism of oxide film formation for drawing titanium // Materials Today: Proceedings. 2019. Vol. 19. Part 5. P. 1949-1952. https://doi.org/10.1016/j.matpr.2019.07.048.
Savrai R.A. Malyigina I.Yu. Makarov A.V. Osinceva A.L. Rogovaya S.A. Kolobyilin Yu.M. Effect of laser alloying with the powder mixtures of Cu–Zn–Ti and Si–Cu on the structure and properties of cast aluminum alloy // Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) – Metal Working and Material Science. 2019. Vol. 21. No. 4. P. 70–84. DOI: 10.17212/1994-6309-2019-21.4-70-84.
Skorynina P.A. Makarov A.V. Men’shakov A.I. Osinceva A.L. Effect of low-temperature carburization in electron beam plasma on the hardening and surface roughness of the metastable austenitic steel // Obrabotka Metallov-Metal Working and Material Science. 2019. Vol. 21. No. 2. P. 97–109. DOI: 10.17212/1994-6309-2019-21.2-97-109.
Korobov Yury Khudorozhkova Yu.V. Holger Hilli Vopneruk Alexander Kotelnikov Aleksandr Burov S.V. Balu Prabu Makarov A.V. Chernov Alexey The Effect of Thickness on the Properties of Laser-Deposited NiBSi-WC Coating on a Cu-Cr-Zr Substrate // Photonics. 2019. Vol. 6. 127. – DOI: 10.3390/photonics6040127.
Prokhorov A. Plekhov O. Sudakov A. Gladkovsky S.V. Petrova (Kuteneva) S.V. Experimental study of high-strength steel under VHCF with external alternating magnetic field // Procedia Structural Integrity. 2019. Iss. 18. P. 802-808. 10.1016/j.prostr.2019.08.229.
Gorkunov E.S. Povolotskaya A.M. Zadvorkin S.M. Putilova E. A. Mushnikov A.N. Effect of cyclic loading on the magnetic behavior of hot-rolled pipe steel 08G2B // Procedia Structural Integrity. 2019. Vol. 20. P. 4-8. 10.1016/j.prostr.2019.12.107.
Taratorkin A.I. Derzhanskiy V.B. Taratorkin I.A. Increasing the Quality of Transient Processes in the Vehicle Transmission // Science & Technique. 2019. Vol. 18. No. 6. P. 509-518. https://doi.org/10.21122/2227-1031-2019-18-6-509-518.
Filimonov A.Y. Trishin V.N. Model-Oriented Co-design of Homogeneous Computing Systems // VESTNIK TOMSKOGO GOSUDARSTVENNOGO UNIVERSITETA-UPRAVLENIE VYCHISLITELNAJA TEHNIKA I INFORMATIKA-TOMSK STATE UNIVERSITY JOURNAL OF CONTROL AND COMPUTER SCIENCE. 2019. No. 48. P. 67-73. DOI: 10.17223/19988605/48/8.
Koroleva (Chekhomova) L.F. Synthesis and Abrasive Properties of Nanoparticulate Modified Solid Solution of Aluminum and Iron Oxides, DOI 10.1134/50002337X19060071 // Inorganic Materials. 2019. Vol. 55, No. 6. P. 556-562.
Grokhovsky V.I. Gladkovsky S.V. Brittle fracture resistance of chinga and seymchan meteorites under static and impact loading // Meteoritics & Planetary Science. 2019. Vol. 54. Suppl. 2. – WOS: 000472113600138.
Privalova V.V. Prosviryakov E.Yu. Simonov M.A. An Exact Solution for the Description of the Gradient Flow of a Vortex Fluid // AIP Conference Proceedings. 2019. Vol. 2176. – 020012. https://doi.org/10.1063/1.5135124.
Volkov V.P. Salikhyanov D.R. On Ring Deformation be Internal Pressure // Izvestiya Ferrous Metallurgy. 2019. Vol. 62. Iss. 3. P. 195-200. DOI: 10.17073/0368-0797-2019-3-195-200.
Berezin I.M. Zalazinskiy A.G. Bykova (Gurchenko) T.M. Nesterenko A.V. Simulation of Metal Powder Bidirectional Compression in a Pressing Tool with a Floating Die // PNRPU Mechanics Bulletin. 2019. No. 3. P. 5-16. DOI: 10.15593/perm.mech/2019.3.01.
Privalova V.V. Prosviryakov E.Yu. Simonov M.A. Nonlinear Gradient Flow of a Vertical Vortex Fluid in a Thin Layer // Russian Journal of Nonlinear Dynamics. 2019. Vol. 15. No. 3. P. 271-283. DOI: 10.20537/nd190306.
Fot A.P. Kamenev S.V. Krylova S.E. Tarova M.Yu. Gladkovsky S.V. Kamantsev I.S. Durability forecasting for the links plates of driving roller chains // Vestnik mashinostroeniya. 2019. № 2. P. 49-54.
Kruchkov D.I. Berezin I.M. Petunin A.A. Computer Simulation of the Stamping of a Long Sheet Blank of a Spherical Tank Element // Vestnik mashinostroeniya. 2019. № 2. P. 28-31.
Privalova V.V. Prosviryakov E.Yu. Nonlinear isobaric flow of a viscous incompressible fluid in a thin layer with permeable boundaries // Vichislitel’naya mekhanika sploshnyh sred. 2019. Vol. 12. No. 2. P. 230-242. DOI: 10.7242/1999-6691/2019.12.2.20.
Titov V.G. Zalazinskiy A.G. Kruchkov D.I. Nesterenko A.V. Multi-Criteria Optimization by the “Ideal Point” Method of Raw Material Composition for Composite Blank Manufacturing // Izv. Vuzov Poroshk. Metallurgiya i funkts. pokrytiya. 2019. No. 2. P. 49-56. DOI dx.doi.org/10.17073/1997-308X-2019-2-49-56.
Kanyukov S.I. Konovalov A.V. Muizemnek O.Yu. Partin A.S. A Concept of Decision Making for Computer-Aided Arrangement of Parts within a Forging // Kuznechno-shtampovochnoe proizvodstvo. Obrabotka materialov davleniem. 2019. No. 8. P. 37-44.
Rekov A.M. Vichuzhanin D.I. Strain Distribution in the Neck of a Flat Sample of Titanium VT1-00 under Uniaxial Tension // Mekhanika kompozitsionnykh materialov i konstruktsii. 2019. Vol. 25. No. 4. P. 522-530. DOI: 10.33113/mkmk.ras.2019.25.04.522_530.05.
Blagonravov A.A. Yurkevich A.V. Ensuring the highest possible energy efficiency of cars in urban traffic // Vestnik mashinostroeniya. 2019. No. 11. P. 47-49. DOI: 10.18411/B100-22011-T20191106.
L.N. Belsky Gorkunov E.S. S.F. Deryugin Lookin N.A. Life is a Relentless Creativity. On the 100th Anniversary of the Birth of Academician N.A. Semikhatov // Vestnik Rossiiskoi akademii nauk. 2019. Vol. 89. No. 1. P. 73-82.
Korobov Yury Michael Filippov Makarov A.V. Malyigina I.Yu. Soboleva N.N. Davide Fantozzi Milanti Andrea Heli Koivuluoto and Petri Vuoristo. Arc-Sprayed Fe-Based Coatings from CoredWires for Wear and Corrosion Protection in Power Engineering. 2018. Vol. 8. No. 71. DOI: 10.3390/coatings8020071.
